Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
22 results
Search Results
Article Citation - WoS: 1Citation - Scopus: 1Plaster Characteristics of Byzantine Wall Paintings in Western Anatolia(Institute of Metals Technology, 2022) Şerifaki, Kerem; Böke, HasanIn this study, the execution technique and material characteristics of the plaster layers of Byzantine wall paintings from three archaeological sites (Anaia, Olympos and Aigai) from western Anatolia were examined for the purpose of their conservation. Throughout the study, mineralogical and chemical composition of the plaster layers were determined with a scanning electron microscope coupled with an X-ray energy dispersive system (SEM-EDS) and X-ray diffraction analyses (XRD). Reflected light microscopy (RLM) and SEM studies conducted on polished cross-sections of samples revealed the stratigraphy and microstructural properties of the plaster layers of the Anaia Church (4th–12th centuries), Baºpýnar Church (13th century) in Olympos and a Byzantine settling and the Chapel (13th century) in Aigai. Throughout the research, pure lime and aggregates in the plasters of Aigai, as well as magnesium-rich lime and straw in the plasters of Anaia and Baºpýnar were determined. The plasters from the Anaia and Baºpýnar Churches exhibit characteristics similar to the samples from the post-iconoclastic period due to a similar raw-material use. In the samples from Aigai, plastering techniques such as marmorino, intonachino and cocciopesto, indicating earlier periods, were observed. As a result of this study, it was concluded that the number and characteristics of the plaster layers from the paintings had been applied intentionally in accordance with the technique of the painting. Plaster characteristics of the wall paintings in western Anatolia from the Byzantine period were found to be similar to the ones in Ýstanbul, the Balkans, Crete and Cyprus. The results of this study will guide the conservation efforts of the wall paintings.Article Citation - WoS: 3Citation - Scopus: 3Microstructural Characteristics of Mortars Prepared by Hot Lime Mix(Union of Croatian Civil Engineers and Technicians, 2020) Şerifaki, Kerem; Uğurlu Sağın, Elif; Böke, HasanThe effect of lime characteristics and hot lime mix method on hydraulic, microstructural and mechanical properties of mortars is determined by producing mortars from quicklimes of two different marbles and two limestones. Results of SEM-EDS, XRD and TGA analyses reveal that the porous microstructure of mortars and spongy texture of calcite crystals are the indicators of the hot lime mix method. This study shows that characteristics of limestones used for the production of limes, as well as the preparation method, directly affect hydraulic, mechanical and microstructural properties of mortars.Conference Object Citation - WoS: 3Citation - Scopus: 4Properties of Roman Lime Mortars in Ancient Lycia Region(American Institute of Physics, 2018) Taşcı, Burcu; Böke, HasanIn this study, the characteristics of mortars used in some ancient Roman buildings located Xanthos (Antalya), Patara (Antalya) and Tlos (Mugla) in Southern Turkey were determined in order to define the properties of the new mortars to be used in the conservation works of the buildings. For this purpose, their basic physical properties, raw material compositions, mineralogical and microstructural properties were determined by X-Ray Diffraction, Fourier Transform Infrared Spectroscopy, Scanning Electron Microscopy coupled with X-Ray Energy Dispersive Spectroscopy. Analysis results indicated that the binder of the mortars composed of lime and fine aggregates have compact and uniform structure. The mortars are of low density and high porosity were produced from high calcium lime containing magnesium and natural aggregates. The lime and aggregate ratios were between 3/4 - 5/2 by weight and the aggregates with particle sizes greater than 1mm. composed the largest fraction of the aggregates. Lime composed of small size of micritic crystals due to use of aged lime puny. Aggregates were natural and mainly composed of quartz, albite, diopside and amorphous silica that may derived from the use of volcanic ash as pozzolans.Article Citation - WoS: 8Citation - Scopus: 10Interior Plastering of Ottoman Bath Buildings(Elsevier Ltd., 2019) İpekci, Emre; Uğurlu Sağın, Elif; Böke, HasanOttoman baths were peculiar buildings with their function in community life, architectural characteristics and material use. Their interior spaces were exposed to high humidity and temperatures that made the building structure vulnerable to physical, chemical, physicochemical and biological degradations. Plasters used on the interior wall surfaces were the most important agents to protect the structure from deterioration and provide durability. This study aims to exhibit the plaster characteristics of Çinili Bath in İstanbul which was an outstanding example of Ottoman baths and built by Great Architect Sinan. Basic physical properties, raw material compositions, mineralogical, microstructural and hydraulic properties of original brick-lime plasters called as horasan (khorasan) plasters used on the walls were determined by XRF, XRD, SEM-EDS and TGA. Multilayered plaster application together with the use of glazed tiles were observed on the wall surfaces of all interior spaces. The plasters were produced from pure lime and pozzolanic crushed brick or tile aggregates and hydraulic because of the pozzolanic properties of aggregates. They are stiff, compact and durable in hot and humid conditions of bath buildings due to their self-healing properties and the formation of calcium silicate hydrates and calcium aluminate hydrates at the lime-brick interfaces and in the pores of the pozzolanic brick aggregates by the reaction of lime. Characteristics of brick aggregates were compared with the construction bricks used in the building. Their chemical and mineralogical compositions revealed that the aggregates had not been produced from construction bricks. All the results indicated that brick-lime plasters were the most suitable materials for bath buildings to protect the structure from the effect of water. © 2019 The AuthorsArticle Citation - WoS: 19Citation - Scopus: 20Execution Technique and Pigment Characteristics of Byzantine Wall Paintings of Anaia Church in Western Anatolia(Elsevier Ltd., 2018) Demir, Serap; Şerifaki, Kerem; Böke, HasanIn this study, material characteristics of wall paintings executed in 11th Century Byzantine Church located in archaeological site of Anaia (Turkey) were investigated to provide historical information of the painting techniques. For this purpose, physical, chemical and mineralogical compositions of the paintings were determined by X-Ray Diffraction, Fourier Transform Infrared spectroscopy, Scanning Electron Microscopy coupled with Energy Dispersive spectroscopy and Thermo-Gravimetric Analysis. Analysis results indicated that the paintings were executed using lime-secco technique. In this technique, pigments were mixed with lime and applied on a smooth plaster layer. Pigments used were mainly iron oxides for red, yellow and purple paintings, aluminosilicates such as celadonite for green paintings and lazurite for dark blue paintings.Article Citation - WoS: 9Citation - Scopus: 10Physicochemical Properties of Glass Tesserae in Roman Terrace House From Ancient Antandros (base Glass, Opacifiers and Colorants)(Ege Üniversitesi, 2017) Kaplan, Zişan; İpekoğlu, Başak; Böke, HasanIn this study, material characteristics of glass mosaic tesserae from Antandros ancient city, western Turkey, were investigated. The main objective of this study was to determine the compositional group of the glass tesserae. Their color, mineralogical, chemical and microstructural characteristics were determined using colorimeter, x-ray diffraction, x-ray fluorescence and scanning electron microscope. The results show that all the Antandros glasses were produced by using coastal sand as Levantine I glasses and exhibit similar compositions with natron type glasses (Roman type glasses), except for lower natron levels. Lower natron levels indicate that Antandros mosaic glass may have been produced in 7th century AD or natron may have been provided from a new flux source due to the shortage of Egyptian mineral soda or due to economic reasons glass manufacturers succeeded to produce same glass with low flux addition. Antandros glass tesserae were all opacified with antimony oxides and colored with transition metal oxides which are common used in Roman Period.Article Citation - WoS: 21Citation - Scopus: 23Determination of Caco 3 and Sio 2 Content in the Binders of Historic Lime Mortars(Springer Verlag, 2012) Uğurlu Sağın, Elif; Böke, Hasan; Aras, Nadir; Yalçın, ŞerifeThe binders of historic mortars composed of small grain sized silica (SiO 2) and carbonated lime (CaCO 3) are considered as the main part that give hydraulic character and high strength to the mortar. In this study, FTIR, SEM-EDS, LIBS and XRD spectroscopy were used to find out the weight ratios of CaCO 3 to SiO 2 in the binders of historic lime mortars. For this purpose, a series of pure calcium carbonate and silica mixture were prepared in ten combinations in varying ratios from 0.5 to 5. Calibration curve was prepared for each analysis by plotting the peak area or intensity ratios of CaCO 3 to SiO 2 versus the weight ratios of CaCO 3 to SiO 2. A good linear correlation coefficient was obtained for each analysis respectively. The analyses were then tested on the binder of the Roman mortar samples. The results indicated that FTIR, SEM-EDS and LIBS spectroscopy are convenient tools to determine the weight ratios of CaCO 3 to SiO 2 in the binders of mortars. But XRD spectroscopy is not convenient for quantitative analysis of binders due to the presence of varied amounts of amorphous or poor crystalline silica in their compositions.Article Citation - WoS: 28Citation - Scopus: 29Characteristics of Bricks Used in the Domes of Some Historic Bath Buildings(Elsevier Ltd., 2013) Uğurlu Sağın, Elif; Böke, HasanIn this study, characteristics of bricks used in the domes of some historic bath buildings dated to 15th century in Izmir were determined in order to indicate the properties of repair bricks that will be used in the conservation works of the domes. For this purpose, their basic physical properties, elemental and mineralogical compositions, firing temperatures and microstructural properties were determined by using XRF, XRD, SEM-EDS and TGA analysis. Analysis results indicated that the bricks are of low density, high porosity and were produced from raw materials containing low amounts of calcium poor clays fired at low temperatures (<. 900. °C). They are mainly consisted of small pores with r<. 5. μm that make the bricks more susceptible to salt crystallization and freeze-thaw cycles. Although the bricks were fired at low temperatures and susceptible to salt crystallization and freeze thaw cycles, the structural systems of the domes remained without losing their integrity due to the moderate climatic conditions of Izmir. Repair bricks that will be used in the conservation works of the domes should be compatible with the original ones and produced from calcium poor clays by firing at low temperatures.Article Citation - WoS: 6Citation - Scopus: 10Construction Techniques of Domes in Some Ottoman Baths(Elsevier Ltd., 2013) Reyhan, Kader; İpekoğlu, Başak; Böke, HasanIn Ottoman bath architecture, the dome is the spherical structural component covering the square planned dressing hall, warm and hot spaces. In this study, the relationship between bond type, dome span, dome height, dome thickness, and the number of oculi of domes in some Ottoman baths located in Western Anatolia (Turkey) were investigated for the purpose of evaluating construction techniques and architectural characteristics. The studied domes were constructed with brick and lime mortar as binder. In the construction of domes, whole and half bricks with different dimensions were used. In all domes, the surfaces were covered with brick-lime plaster, a thin layer on the interior and a thick layer on the exterior. Terracotta pipes placed in the brick bond or the openings made through the brick bond constituted oculi for lighting. Depending on the brick bond, a linear relationship was determined between the span, height, and number of oculi, whereas a mathematical ratio between 1:10 and 1:12 was determined between the span and thickness of the domes. It has also been noted that as the dome span increases, so does the height, thickness at the springing level and the number of oculi. The domes examined with these properties should be seen as historical documents representing the construction technology of the 15th century. Therefore, these properties of domes must be preserved and special care needs to be taken as not to lose the original qualities of these domes during conservation works.Article Citation - WoS: 10Citation - Scopus: 12Weathering of Andesite Monuments in Archaeological Sites(Elsevier Ltd., 2013) Kaplan, Çaglayan Deniz; Mürtezaoğlu, Fulya; İpekoğlu, Başak; Böke, HasanArchaeological sites, which are the integral parts of cultural heritage, have to be conserved as a whole to have a variety of information about past societies. In this study, the weathering problems of unburied and newly excavated andesite monuments in Aigai archaeological site (Manisa, Turkey) were investigated for the purpose of their conservation. With this intent, the basic physical properties, mineralogical and chemical compositions and microstructural properties of sound and weathered samples were determined by using XRD, SEM-EDS, FT-IR and TGA analysis. Results of the study indicated that the weathering mechanisms of unburied and post-excavated andesite differ from each other. The main weathering problems observed on the unburied stones are mainly increasing microcracks from inner parts to the surfaces, deposition of iron oxides and microbiological colonization due to climatic conditions of the site. In the newly excavated areas, calcium carbonate deposition, accumulation of clay minerals and microbiological colonization are the main weathering problems due to weathering of silica minerals through the action of carbon dioxide and water during burial.
- «
- 1 (current)
- 2
- 3
- »