Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
2 results
Search Results
Article Citation - WoS: 4Citation - Scopus: 5Enhanced Optoelectronic Properties of Magnetron Sputtered Ito/Ag Multilayers by Electro-Annealing(AVS, 2022) Uyanık, Zemzem; Türkoğlu, Fulya; Köseoğlu, Hasan; Ekmekçioğlu, Merve; Ata, Bengü; Demirhan, Yasemin; Özdemir, Mehtap; Aygün, Gülnur; Özyüzer, LütfiIndium tin oxide/silver/indium tin oxide (ITO/Ag/ITO) multilayers have attracted much attention to fulfill the growing need for high-performance transparent conducting oxide electrodes. To make these transparent multilayers work better, electro-annealing, which is a method of self-heating by electric current, can be effective. Moreover, the effect of current on ITO/Ag/ITO multilayers should be investigated to make sure that electronic devices will be reliable over their lifetime. In this study, ITO/Ag/ITO multilayer electrodes with varying Ag thicknesses were grown by DC magnetron sputtering at room temperature. Structural, optical, and electrical properties of these multilayers were investigated before and after electro-annealing. Measurement results revealed that improved optical transmittance and sheet resistance can be obtained by the optimization of Ag thickness for the as-grown ITO/Ag/ITO layers. The highest figure of merit (FoM) value of 17.37 × 10−3 Ω−1 with optical transmittance of 85.15% in the visible region and sheet resistance of 11.54 Ω/□ was obtained for the Ag thickness of 16.5 nm for as-grown samples. The electro-annealing of as-grown ITO/Ag/ITO multilayers led to improved optical behavior of the multilayer structure over a wide spectral range, especially in the near-infrared range. Electro-annealing also provided an improvement in the crystallinity and sheet resistance of the electrodes. The improvement of the electrical and optical properties of the structure enabled a FoM of 23.07 × 10−3 Ω−1 with the optical transmittance of 86.80% in the visible region and sheet resistance of 10.52 Ω/□. The findings of this work provide proper knowledge of the properties of ITO/Ag/ITO multilayers under electrical current and suggest that the overall performance of the multilayers can be improved by the electro-annealing process.Article Citation - WoS: 39Citation - Scopus: 46Surface Free Energy Analysis of Ito/Au Multilayer Thin Films on Polycarbonate Substrate by Apparent Contact Angle Measurements(Elsevier, 2020) Özbay, Salih; Erdoğan, Nursev; Erden, Fuat; Ekmekçioğlu, Merve; Özdemir, Mehtap; Aygün, Gülnur; Özyüzer, LütfiA detailed surface free energy (SFE) knowledge of transparent conducing oxide (TCO)/metal/TCO electrodes is necessary for their applications related to surface wettability. However, SFE analysis of these surfaces has not been performed systematically previously. In this study, ITO and ITO/Au/ITO multilayer thin films were coated onto O-2 plasma treated polycarbonate (PC) substrates by magnetron sputtering. The wettability characteristics of untreated PC, O-2 plasma treated PC, ITO, Au interlayer, and ITO/Au/ITO multilayer thin films were evaluated by apparent contact angle measurements of nine different test liquids having various surface tensions. Following this, Lifshitz-van der Waals, acidic, basic, dispersive, and polar components of SFE were calculated using acidbase, geometric and harmonic mean approaches. In the present study, in which the significance of calculation methods and selected liquid pairs on SFE parameters were investigated, the effect of Au interlayer presence on SFE parameters were also evaluated simultaneously. The results showed that the total SFE values of ITO/Au/ITO multilayer thin films were found to be higher than that of ITO surface. The reasons behind this difference were discussed in terms of SFE components obtained using various liquid pairs by different methods. The results were also supported with XRD, XPS, AFM, and TEM analysis.