Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
27 results
Search Results
Article Citation - WoS: 72Citation - Scopus: 79Artificial Neural Networks for Estimating Daily Total Suspended Sediment in Natural Streams(IWA Publishing, 2006) Tayfur, Gökmen; Güldal, VeyselEstimates of sediment loads in natural streams are required for a wide spectrum of water resources engineering problems from optimal reservoir design to water quality in lakes. Suspended sediment constitutes 75-95% of the total load. The nonlinear problem of suspended sediment estimation requires a nonlinear model. An artificial neural network (ANN) model has been developed to predict daily total suspended sediment (TSS) in rivers. The model is constructed as a three-layer feedforward network using the back-propagation algorithm as a training tool. The model predicts TSS rates using precipitation (P) data as input. For network training and testing 240 sets of data sets were used. The model successfully predicted daily TSS loads using the present and past 4 days precipitation data in the input vector with R2 = 0.91 and MAE = 34.22 mg/L. The performance of the model was also tested against the most recently developed non-linear black box model based upon two-dimensional unit sediment graph theory (2D-USGT). The comparison of results revealed that the ANN has a significantly better performance than the 2D-USGT. Investigation results revealed that the ANN model requires a period of more than 75 d of measured P-TSS data for training the model for satisfactory TSS estimation. The statistical parameter range (xmin - xmax) plays a major role for optimal partitioning of data into training and testing sets. Both sets should have comparable values for the range parameter.Article Citation - WoS: 1Citation - Scopus: 1Estimation of Mechanical Properties of Limestone Using Regression Analyses and Ann(Foundation Cement, Lime, Concrete, 2012) Teomete, Egemen; Tayfur, Gökmen; Aktaş, EnginEstimation of mechanical properties of rocks is important for researchers and field engineers working in cement and concrete industry. Limestone is used in cement production. In this study, Schmidt hammer, ultrasonic pulse velocity, porosity, uniaxial compression and indirect tension tests were conducted on limestone obtained from a historical structure. Regression analyses were used to develop models relating mechanical properties of limestone. Artificial Neural Network (ANN) was performed to determine the mechanical properties. The performance of regression models and ANN were compared by existing models in the literature. The results showed that the regression models and ANN yield satisfactory performance with minimum error. The regression models between tensile strength and wave velocity, tensile strength and porosity, wave velocity and porosity have been developed for the first time in literature. The ANN is used for the first time to estimate the mechanical properties of limestone. The use of separate training and testing sets in the regression analyses of mechanical properties of limestone is conducted for the first time. The models developed in this study can be used by researchers and field engineers to relate the mechanical properties of limestone.Article Citation - WoS: 17Citation - Scopus: 21The Use of Neural Networks for the Prediction of Cone Penetration Resistance of Silty Sands(Springer Verlag, 2017) Erzin, Yusuf; Ecemiş, NurhanIn this study, an artificial neural network (ANN) model was developed to predict the cone penetration resistance of silty sands. To achieve this, the data sets reported by Ecemis and Karaman, including the results of three high-quality field tests, namely piezocone penetration test, pore pressure dissipation tests, and direct push permeability tests performed at 20 different locations on the northern coast of the Izmir Gulf in Turkey, have been used in the development of the ANN model. The ANN model consisted of three input parameters (relative density, fines content, and horizontal coefficient of consolidation) and a single output parameter (normalized cone penetration resistance). The results obtained from the ANN model were compared with those obtained from the field tests. It is found that the ANN model is efficient in determining the cone penetration resistance of silty sands and yields cone penetration resistance values that are very close to those obtained from the field tests. Additionally, several performance indices such as the determination coefficient, variance account for, mean absolute error, root mean square error, and scaled percent error were computed to examine the performance of the ANN model developed. The performance level attained in the ANN model shows that the ANN model developed in this study can be employed for predicting cone penetration of silty sands quite efficiently.Article Citation - WoS: 2Citation - Scopus: 2Soft Computing and Regression Modelling Approaches for Link-Capacity Functions(Czech Technical University in Prague, 2016) Koşun, Çağlar; Tayfur, Gökmen; Çelik, Hüseyin MuratLink-capacity functions are the relationships between the fundamental traffic variables like travel time and the flow rate. These relationships are important inputs to the capacity-restrained traffic assignment models. This study investigates the prediction of travel time as a function of several variables V/C (flow rate/capacity), retail activity, parking, number of bus stops and link type. For this purpose, the necessary data collected in Izmir, Turkey are employed by Artificial Neural Networks (ANNs) and Regression-based models of multiple linear regression (MLR) and multiple non-linear regression (MNLR). In ANNs modelling, 70% of the whole dataset is randomly selected for the training, whereas the rest is utilized in testing the model. Similarly, the same training dataset is employed in obtaining the optimal values of the coefficients of the regression-based models. Although all of the variables are used in the input vector of the models to predict the travel time, the most significant independent variables are found to be V/C and retail activity. By considering these two significant input variables, ANNs predicted the travel time with the correlation coefficient R = 0:87 while this value was almost 0.60 for the regression-based models.Article Citation - WoS: 34Citation - Scopus: 38The Use of Neural Networks for Cpt-Based Liquefaction Screening(Springer Verlag, 2014) Erzin, Yusuf; Ecemiş, NurhanThis study deals with development of two different artificial neural network (ANN) models: one for predicting cone penetration resistance and the other for predicting liquefaction resistance. For this purpose, cone penetration numerical simulations and cyclic triaxial tests conducted on Ottawa sand–silt mixes at different fines content were used. Results obtained from ANN models were compared with simulation and experimental results and found close to them. In addition, the performance indices such as coefficient of determination, root mean square error, mean absolute error, and variance were used to check the prediction capacity of the ANN models developed. Both ANN models have shown a high prediction performance based on the performance indices. It has been demonstrated that the ANN models developed in this study can be employed for predicting cone penetration and liquefaction resistances of sand–silt mixes quite efficiently.Article Citation - WoS: 96Citation - Scopus: 105Comparative Study of a Building Energy Performance Software (kep-Iyte and Ann-Based Building Heat Load Estimation(Elsevier Ltd., 2014) Turhan, Cihan; Kazanasmaz, Zehra Tuğçe; Erlalelitepe Uygun, İlknur; Ekmen, Kenan Evren; Gökçen Akkurt, GüldenThe several parameters affect the heat load of a building; geometry, construction, layout, climate and the users. These parameters are complex and interrelated. Comprehensive models are needed to understand relationships among the parameters that can handle non-linearities. The aim of this study is to predict heat load of existing buildings benefiting from width/length ratio, wall overall heat transfer coefficient, area/volume ratio, total external surface area, total window area/total external surface area ratio by using artificial neural networks and compare the results with a building energy simulation tool called KEP-IYTE-ESS developed by Izmir Institute of Technology. A back propagation neural network algorithm has been preferred and both simulation tools were applied to 148 residential buildings selected from 3 municipalities of Izmir-Turkey. Under the given conditions, a good coherence was observed between artificial neural network and building energy simulation tool results with a mean absolute percentage error of 5.06% and successful prediction rate of 0.977. The advantages of ANN model over the energy simulation software are observed as the simplicity, the speed of calculation and learning from the limited data sets.Article Citation - WoS: 37Citation - Scopus: 38Prediction of the Bottom Ash Formed in a Coal-Fired Power Plant Using Artificial Neural Networks(Elsevier Ltd., 2012) Bekat, Tuğçe; Erdoğan, Muharrem; İnal, Fikret; Genç, Aytenhe amount of bottom ash formed in a pulverized coal-fired power plant was predicted by artificial neural network modeling using one-year operating data of the plant and the properties of the coals processed. The model output was defined as the ratio of amount of bottom ash produced to amount of coal burned (Bottom ash/Coal burned). The input parameters were the moisture contents, ash contents and lower heating values of the coals. The total 653 data were divided into two groups for the training (90% of the data) and the testing (10% of the data) of the network. A three-layer, feed-forward type network architecture with back-propagation learning was used in the modeling study. The activation function was sigmoid function. The best prediction performance was obtained for a one hidden layer network with 29 neurons. The learning rate and the tolerance value were 0.2 and 0.05, respectively. R2 (coefficient of determination) values between the actual (Bottom ash/Coal burned) ratios and the model predictions were 0.988 for the training set and 0.984 for the testing set. In addition, the sensitivity analysis indicated that the ash content of coals was the most effective parameter for the prediction of the ratio of bottom ash to coal burned.Article Citation - WoS: 29Citation - Scopus: 34Prediction of Suspended Sediment Concentration From Water Quality Variables(Springer Verlag, 2014) Bayram, Adem; Kankal, Murat; Tayfur, Gökmen; Önsoy, HızırThis study investigates use of water quality (WQ) variables, namely total chromium concentration, total iron concentration, and turbidity for predicting suspended sediment concentration (SSC). For this purpose, the artificial neural networks (ANNs) and regression analysis (RA) models are employed. Seven different RA models are constructed, considering the functional relation between measured WQ variables and SSC. The WQ and SSC data are fortnightly obtained from six monitoring stations, located on the stream Harsit, Eastern Black Sea Basin, Turkey. A total of 132 water samples are collected from April 2009 to February 2010. Model prediction results reveal that ANN is able to predict SSC from WQ data, with mean absolute error (MAE) of 10.30 mg/L and root mean square error (RMSE) of 13.06 mg/L. Among seven RA models, the best one, which has the form including all independent parameters, produces results comparable to those of ANN, with MAE = 14.28 mg/L and RMSE = 15.35 mg/L. The sensitivity analysis results reveal that the most effective parameter on the SSC is total chromium concentration. These results have time- and cost-saving implications.Article Citation - WoS: 29Citation - Scopus: 31Evaluating the Knowledge Management Practices of Construction Firms by Using Importance-Comparative Performance Analysis Maps(American Society of Civil Engineers (ASCE), 2011) Kale, Serdar; Karaman, Erkan A.The emergence of the effective management of knowledge resources as a key factor in gaining and sustaining competitive advantage presents new challenges to construction firms. Evaluating knowledge management practices is considered one of the most important challenges facing firms in today's business environment. This paper proposes a model for evaluating the knowledge management practices of construction firms. The proposed model incorporates knowledge management concepts and multilayer perceptron (MLP) neural networks to construct an importance-comparative performance analysis (ICPA) map, a simple visual tool that can provide powerful diagnostic information to executives of construction firms. The model evaluates a firm's knowledge management practices, identifies its competitive advantages and disadvantages in each knowledge management practice, and sets priorities for managerial actions to improve knowledge management practices. A real-world case study was conducted by administering a survey to 105 construction firms operating in Turkey and is presented to illustrate the implementation and utility of the proposed model. The case study findings provided preliminary support for the validity of the proposed model.Article Citation - WoS: 4Citation - Scopus: 5Biophysical and Microbiological Study of High Hydrostatic Pressure Inactivation of Bovine Viral Diarrheavirus Type 1 on Serum(Elsevier Ltd., 2012) Ceylan, Çağatay; Severcan, Feride; Özkul, Aykut; Severcan, Mete; Bozoğlu, Faruk; Taheri, NusretThe effect of high hydrostatic pressure application on fetal bovine serum components and the model microorganism (Bovine Viral Diarrheavirus type 1 NADL strain) was studied at 132 and 220MPa pressure for 5min at 25°C. Protein secondary structures were found to be unaffected by an artificial neural network application on the amide I region for both untreated and HHP treated samples. FTIR spectroscopy study of both the HHP-treated and control samples revealed changes in the intensity of some bands in the finger-print region (1500-900cm -1) originating mainly from lipids which are thought to result from changes in the lipoprotein structure. The virus strain lost its infectivity completely after 220MPa HHP treatments. These results indicate that HHP can be successfully used for inactivation of pestiviruses while leaving structural and functional properties of serum and serum products unaffected. © 2011 Elsevier B.V.
- «
- 1 (current)
- 2
- 3
- »