Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
8 results
Search Results
Article Selective Growth of Fapbbr3 Nanocrystals With Precisely Tailored Optical Properties for Advanced Optoelectronic Applications(Amer Chemical Soc, 2025) Guvenc, C. Meric; Polat, Nahit; Arica, Tugce A.; Balci, SinanUnderstanding the evolution of semiconductor nanocrystals (NCs) during their colloidal synthesis is essential for achieving improved control over their physical and chemical properties. The fast reaction kinetics and concurrent nucleation and growth periods of lead halide perovskite NCs pose significant challenges in controlling the synthesis. Here, we present the room-temperature colloidal synthesis of FAPbBr3 NCs with physically decoupled nucleation and growth periods by using the common oleylamine and oleic acid ligand pair for lead halide perovskite NCs. Importantly, in this method, the nucleation and growth phases are entirely decoupled by halting the reaction at a metastable state, where the FAPbBr3 nuclei are formed. Subsequently, preformed FAPbBr3 nuclei are selectively grown by increasing supersaturation. This is achieved by reducing the monomer solubility through the injection of oleic acid into the solution. Notably, two-dimensional perovskite nanostructures form as intermediate products during the synthesis. Furthermore, the size of the FAPbBr3 NCs is tuned from 5.7 to 13.5 nm by controlling the injected oleic acid amount. Photoluminescence quantum yields of the FAPbBr3 perovskite NCs synthesized by using this method reached up to 95%. These findings demonstrate a robust strategy for the controlled synthesis of FAPbBr3 perovskite NCs, providing precisely tailored optical properties for advanced applications such as solar cells, photodetectors, and light-emitting diodes.Article Citation - WoS: 7Citation - Scopus: 7Breaking the Boundaries of the Goldschmidt Tolerance Factor With Ethylammonium Lead Iodide Perovskite Nanocrystals(American Chemical Society, 2024) Güvenç, Çetin Meriç; Toso, Stefano; Ivanov, Yurii P.; Saleh, Gabriele; Balcı, Sinan; Divitini, Giorgio; Manna, LiberatoWe report the synthesis of ethylammonium lead iodide (EAPbI3) colloidal nanocrystals as another member of the lead halide perovskites family. The insertion of an unusually large A-cation (274 pm in diameter) in the perovskite structure, hitherto considered unlikely due to the unfavorable Goldschmidt tolerance factor, results in a significantly larger lattice parameter compared to the Cs-, methylammonium- and formamidinium-based lead halide perovskite homologues. As a consequence, EAPbI3 nanocrystals are highly unstable, evolving to a nonperovskite delta-EAPbI3 polymorph within 1 day. Also, EAPbI3 nanocrystals are very sensitive to electron irradiation and quickly degrade to PbI2 upon exposure to the electron beam, following a mechanism similar to that of other hybrid lead iodide perovskites (although degradation can be reduced by partially replacing the EA+ ions with Cs+ ions). Interestingly, in some cases during this degradation the formation of an epitaxial interface between (EA x Cs1-x )PbI3 and PbI2 is observed. The photoluminescence emission of the EAPbI3 perovskite nanocrystals, albeit being characterized by a low quantum yield (similar to 1%), can be tuned in the 664-690 nm range by regulating their size during the synthesis. The emission efficiency can be improved upon partial alloying at the A site with Cs+ or formamidinium cations. Furthermore, the morphology of the EAPbI3 nanocrystals can be chosen to be either nanocube or nanoplatelet, depending on the synthesis conditions.Article Citation - WoS: 4Citation - Scopus: 4Color-Tunable All-Inorganic Cspbbr3 Perovskites Nanoplatelet Films for Photovoltaic Devices(American Chemical Society, 2019) Özcan, Mehmet; Özen, Sercan; Topçu, Gökhan; Demir, Mustafa Muammer; Şahin, HasanHerein, we demonstrate a novel coating approach to fabricate CsPbBr3 perovskite nanoplatelet film with heat-free process via electrospraying from precursor solution. A detailed study is carried out to determine the effect of various parameters such as ligand concentration, electric field, flow rate, etc. on the optical properties. By controlling the volume ratios of the oleylamine (OAm) and oleic acid (OA), the coalescing and thickness of the resulting nanoplatelets can be readily tuned that results in control over emission in the range of 100 nm without any antisolvent crystallization or heating processes. The varying electrical field and flow rate was found as inefficient on the emission characteristics of the films. In addition, the crystal films were obtained under ambient conditions on the ITO coated glass surfaces as in the desired pattern. As a result, we demonstrated a facile and reproducible way of synthesizing and coating of CsPbBr3 perovskite nanoplatelets which is suitable for large-scale production. In this method, the ability of tuning the degree of quantum confinement for perovskite nanoplatelets is promising approach for the one-step fabrication of crystal films that may enable the use in optoelectronics.Article Citation - WoS: 13Citation - Scopus: 12Orthorhombic Cspbi3 Perovskites: Thickness-Dependent Structural, Optical and Vibrational Properties(Elsevier, 2020) Özen, Sercan; İyikanat, Fadıl; Özcan, Mehmet; Tekneci, Gülsüm Efsun; Eren, İsmail; Sözen, Yiğit; Şahin, HasanCesium lead halide perovskites have been subject to intense investigation, mostly because of their potential to be used in optoelectronic device applications. However, regarding the need for nanoscale materials in forthcoming nanotechnology applications, understanding of how the characteristic properties of these perovskite crystals are modified through dimensional crossover is essential. In this study, thickness-dependence of the structural, electronic and vibrational properties of orthorhombic CsPbI3, which is one of the most stable phase at room temperature, is investigated by means of state-of-the-art first-principles calculations. Our results show that (i) bilayers and monolayers of CsPbI3 can be stabilized in orthorhombic crystal symmetry, (ii) among; the possible ultra-thin perovskites only structures with CsI-terminated surface are dynamically stable (iii) electronic band gap increases with decrease in perovskite thickness due to quantum size effect and (iv) reflectivity and transmissivity of the orthorhombic CsPbI3 can be tuned by varying the thickness that modifies the electron confinement. (c) 2019 Elsevier B.V. All rights reserved.Article Citation - WoS: 25Citation - Scopus: 30Thinning Cspb2br5 Perovskite Down To Monolayers: Cs-Dependent Stability(American Physical Society, 2017) İyikanat, Fadıl; Sarı, Emre; Şahin, HasanUsing first-principles density functional theory calculations, we systematically investigate the structural, electronic, and vibrational properties of bulk and potential single-layer structures of perovskitelike CsPb2Br5 crystal. It is found that while Cs atoms have no effect on the electronic structure, their presence is essential for the formation of stable CsPb2Br5 crystals. The calculated vibrational spectra of the crystal reveal that not only the bulk form but also the single-layer forms of CsPb2Br5 are dynamically stable. Predicted single-layer forms can exhibit either semiconducting or metallic character. Moreover, the modification of the structural, electronic, and magnetic properties of single-layer CsPb2Br5 upon formation of vacancy defects is investigated. It is found that the formation of Br vacancy (i) has the lowest formation energy, (ii) significantly changes the electronic structure, and (iii) leads to ferromagnetic ground state in the single-layer CsPb2Br5. However, the formation of Pb and Cs vacancies leads to p-type doping of the single-layer structure. Results reported herein reveal that the single-layer CsPb2Br5 crystal is a novel stable perovskite with enhanced functionality and a promising candidate for nanodevice applications.Article Citation - WoS: 15Citation - Scopus: 12Solubility and Aging of Lead Magnesium Niobate in Water(Elsevier Ltd., 2009) Şakar-Deliormanlı, Aylin; Çelik, Erdal; Polat, MehmetLead magnesium niobate (PMN) is an important relaxor ferroelectric material commonly employed in multilayer capacitor and actuator manufacturing owing to its high dielectric constant and superior electrostrictive properties. However, stability of this material in water is not very well known and there is need for a detailed investigation. In this research, solubility of lead magnesium niobate powders in water was determined as a function of solids concentration. The obtained results showed that the amount of cation leaching from the PMN surface depends on the pH value of the suspension and the solids concentration. The Pb2+ and Mg2+ ion dissolution was very high especially in the acidic pH range. Nevertheless, neither the dissolution mechanism nor the effects of dissolved ions on the stability were the same for those ions. The study provides new aspects on the solubility of perovskite materials which possess more than one soluble cation in their structure.Article Citation - WoS: 7Citation - Scopus: 9Preparation of the Pb(mg1/3nb2 Films by Aqueous Tape Casting(Elsevier Ltd., 2009) Şakar-Deliormanlı, Aylin; Çelik, Erdal; Polat, MehmetLead magnesium niobate (PMN) is a relaxor ferroelectric material. Because of its high dielectric constant and superior electrostrictive properties it is commonly used in the manufacture of multilayer electronic devices which is typically produced by tape casting. However, preparation of PMN slurry formulations to use in aqueous tape casting process is not investigated in detail yet. Therefore, in this study aqueous PMN formulations were developed for tape casting and its relation with the final properties of PMN films were investigated. The slurries were prepared using poly(acrylic acid)-based comb polymer as the dispersant, nonionic acrylic latex as the binder and the hydroxypropyl methyl cellulose as the wetting agent. The results showed that it is possible to prepare flexible, crack-free PMN films using highly concentrated suspensions without using any plasticizer. The study gives guidelines for the aqueous tape casting of PMN and can be adapted to processing of other multi-component metal oxides.Article Citation - WoS: 21Citation - Scopus: 23Adsorption of Anionic Polyelectrolyte and Comb Polymers Onto Lead Magnesium Niobate(Elsevier Ltd., 2008) Şakar-Deliormanlı, Aylin; Çelik, Erdal; Polat, MehmetThis paper presents the results concerning the adsorption mechanism of polyacrylic acid (PAA) and polyacrylic acid/polyethylene oxide (PAA/PEO) comb polymer onto lead magnesium niobate (PMN) powders. In the study adsorption behavior of PAA and PAA/PEO onto PMN surface were determined in aqueous solutions and the influence of pH and ionic strength was investigated. Results showed that adsorption of PAA or PAA/PEO increased with decreasing pH of the suspensions. The increase in the ionic strength or the presence of divalent cations caused an increase in the adsorption of both polyelectrolytes. It was observed that the adsorption reaches a maximum when PAA is fully complexed in solution. On the other hand, the increase in the adsorption of PAA/PEO onto PMN in the presence of monovalent or divalent salt was attributed to the decrease in the electrostatic forces rather than complex formation with the divalent metal ions in solution. Turbidity measurements showed that there is no complex formation between the divalent metal ions and PAA/PEO comb polymers due to shielding effect of the PEO teeth.