Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
13 results
Search Results
Article Proliferative Effects and Cellular Uptake of Ceramic Nanoparticles in Cancer and Normal Cells(Univ Chemistry & Technology, Prague, 2024) Cesmeli, Selin; Tomak, Aysel; Winkler, David A.; Karakus, Ceyda OkselThe high biocompatibility, wear resistance, and high surface area-to-volume ratios of calcium phosphate (CaP) nanoparticles make them materials of great interest for a very broad range of medical applications, such as dentistry, drug delivery, biomedical imaging, gene transfection and silencing, biomedical imaging, immunisation, and bone substitution. While their use as an enamel remineralisation agent, a bone substitution material, an implant coating, and drug/gene delivery agents is widely approved by the regulating bodies, insufficient attention has been paid to the interactions of CaP-based nanoparticles with cells and organs once in the bloodstream and distributed through the body. Here, three different CaP-based nanoparticles (CP: calcium phosphate, TCP: tricalcium phosphate, and HAp: hydroxyapatite) were examined for the proliferative effects, oxidative damage potential, and cellular uptake in the human embryonic kidney (HEK293) and pancreatic cancer (Panc-1) cell lines. The physicochemical properties of the nanoparticles were characterised by Teller analysis, and X-ray diffraction spectroscopy. Maximum proliferative effects were generated by 400 mu g center dot ml-1 TCP (220 %) in HEK293 cells. Interestingly, although CP nanoparticles had the highest reactive oxygen species formation capacity in the HEK293 cells, they exhibited the lowest proliferative effects and a relatively low internalisation rate, suggesting a minimal correlation between the cellular uptake level and oxidative potential.Article Citation - WoS: 4Citation - Scopus: 4Optimizing the Dispersion of Calcium Phosphate Nanoparticles for Cellular Studies Using Statistical Design of Experiments(Elsevier, 2023) Önder, Anıl Can; Tomak, Aysel; Öksel Karakuş, CeydaThe in vitro experimentation of ceramic nanoparticles often requires their dispersion in liquid media without causing particle clumps or deteriorating sample integrity. However, the dispersion of nanoparticles using the available protocols rarely leads to stable and uniform dispersions which, in turn, raises concerns about the validity, repeatability and comparability of the findings observed in vitro. Moreover, the ability to control the final dispersion quality of ceramic nanoparticles is an essential step to obtaining optimized nanoceramic materials with desired functionality and to enhancing their performance in subsequent applications. While the need to have a comprehensive guideline for the dispersion of nanoparticles has led to several published documents and protocols, the dispersion methodology of ceramic nanoparticles and the relative contribution of the experimental parameters to the quality of resulting dispersion are still not clear. Here, we employed the statistical design of experiment (DoE) approach to systematically assess the magnitude and source of variation in dispersion quality of two different ceramic nanoparticles, hydroxyapatite and tricalcium phosphate. Using the first-order Plackett-Burman Design (PBD), nanoparticle concentration, pH and the presence of an additive were identified as the most critical factors influencing the resulting hydrodynamic size and zeta potential of the ceramic nanoparticles. Optimization using a second-order Central Composite Design (CCD) yielded a set of quadratic regression equations that were used to predict the hydrodynamic size or zeta potential of ceramic nanoparticles with high accuracy (R2, 0.88–0.92). The results of PBD screening and CCD optimization experiments were employed to prepare nanoparticle dispersions of different quality, which were then used to compare the effect of aggregation on the viability of human osteosarcoma (SaOS-2) cells. Overall, the results of this study provided insight into the role that various experimental parameters play in the colloidal stability and dispersion of ceramic nanoparticles. © 2023Article Citation - WoS: 17Citation - Scopus: 22Protein Corona Formation on Silver Nanoparticles Under Different Conditions(Elsevier, 2022) Tomak, Aysel; Yılancıoğlu, Buket; Winkler, David; Öksel Karakuş, CeydaThe surfaces of nanoparticles become covered by biomolecules in biological fluids. This protein ‘corona’ modifies materials’ characteristics and biological activity. The composition of the protein corona is dynamic, abundant biomolecules that bind first are subsequently replaced by less abundant but more tightly bound ones. Here, we explore the formation of the silver nanoparticle protein corona on exposure to cell culture media containing 10 % fetal bovine serum supplemented Dulbecco's Modified Eagle's medium. Sodium dodecyl-sulfate polyacrylamide gel electrophoresis and liquid chromatography-mass spectrometry/mass spectrometry analysis were used to monitor how different parameters such as incubation time, heating duration, cell culture medium, incubation temperature, and the number of washes affect the nanoparticle–protein corona complex. silver nanoparticles with and without bound proteins were characterized by electron microscopy, dynamic light scattering, and ultraviolet-visible-near-IR spectroscopy. The tetrazolium-based MTT assay was used to determine viability of A549 human lung adenocarcinoma cells treated with silver nanoparticles. Characterization of the nanoparticles before and after protein binding provided insights into their changing morphology on corona formation. Our results confirmed that the physiological environment directly affects protein corona formation on nanoparticle surfaces. In particular, incubation condition-dependent differences in the amount of bound proteins were observed. This work highlights the importance of environmental drivers of protein adsorption, which should be considered when predicting and/or controlling protein targets of silver nanoparticles.Article Citation - WoS: 69Citation - Scopus: 73Nanoparticle-Protein Corona Complex: Understanding Multiple Interactions Between Environmental Factors, Corona Formation, and Biological Activity(Taylor & Francis, 2021) Öksel Karakuş, Ceyda; Tomak, Aysel; Çeşmeli, Selin; Hanoğlu, Berçem Dilan; Winkler, DavidThe surfaces of pristine nanoparticles become rapidly coated by proteins in biological fluids, forming the so-called protein corona. The corona modifies key physicochemical characteristics of nanoparticle surfaces that modulate its biological and pharmacokinetic activity, biodistribution, and safety. In the two decades since the protein corona was identified, the importance of nano particles surface properties in regulating biological responses have been recognized. However, there is still a lack of clarity about the relationships between physiological conditions and cor ona composition over time, and how this controls biological activities/interactions. Here we review recent progress in characterizing the structure and composition of protein corona as a function of biological fluid and time. We summarize the influence of nanoparticle characteristics on protein corona composition and discuss the relevance of protein corona to the biological activity and fate of nanoparticles. The aim is to provide a critical summary of the key factors that affect protein corona formation (e.g. characteristics of nanoparticles and biological environ ment) and how the corona modulates biological activity, cellular uptake, biodistribution, and drug delivery. In addition to a discussion on the importance of the characterization of protein corona adsorbed on nanoparticle surfaces under conditions that mimic relevant physiological environment, we discuss the unresolved technical issues related to the characterization of nano particle-protein corona complexes during their journey in the body. Lastly, the paper offers a perspective on how the existing nanomaterial toxicity data obtained from in vitro studies should be reconsidered in the light of the presence of a protein corona, and how recent advances in fields, such as proteomics and machine learning can be integrated into the quantitative analysis of protein corona components.Article Citation - WoS: 16Citation - Scopus: 18Bacterial Detection Using Bacteriophages and Gold Nanorods by Following Time-Dependent Changes in Raman Spectral Signals(Informa Healthcare, 2018) Moghtader, Farzaneh; Tomak, Aysel; Zareie, Hadi M.; Pişkin, ErhanThis study attemps to develop bacterial detection strategies using bacteriophages and gold nanorods (GNRs) by Raman spectral analysis. Escherichia coli was selected as the target and its specific phage was used as the bioprobe. Target bacteria and phages were propagated/purified by traditional techniques. GNRs were synthesized by using hexadecyltrimethyl ammonium bromide (CTAB) as stabilizer. A two-step detection strategy was applied: Firstly, the target bacteria were interacted with GNRs in suspensions, and then they were dropped onto silica substrates for detection. It was possible to obtain clear surface-enchanced Raman spectroscopy (SERS) peaks of the target bacteria, even without using phages. In the second step, the phage nanoemulsions were droped onto the bacterial-GNRs complexes on those surfaces and time-dependent changes in the Raman spectra were monitored at different time intervals upto 40 min. These results demonstrated that how one can apply phages with plasmonic nanoparticles for detection of pathogenic bacteria very effectively in a quite simple test.Article Citation - WoS: 12Citation - Scopus: 11Theoretical and Experimental Investigation of Conjugation of 1,6-Hexanedithiol on Mos2(IOP Publishing Ltd., 2018) Gül, Aytaç; Bacaksız, Cihan; Ünsal, Emre; Akbalı, Barış; Tomak, Aysel; Zareie, Hadi M.; Şahin, HasanWe report an experimental and theoretical investigation of conjugation of 1,6-Hexaneditihiol (HDT) on MoS2 which is prepared by mixing MoS2 structure and HDT molecules in proper solvent. Raman spectra and the calculated phonon bands reveal that the HDT molecules bind covalently to MoS2. Surface morphology of MoS2/HDT structure is changed upon conjugation of HDT on MoS2 and characterized by using Scanning Electron Microscope (SEM). Density Functional Theory (DFT) based calculations show that HOMO-LUMO band gap of HDT is altered after the conjugation and two-S binding (handle-like) configuration is energetically most favorable among three different structures. This study displays that the facile thiol functionalization process of MoS2 is promising strategy for obtaining solution processable MoS2.Article Citation - WoS: 6Citation - Scopus: 6Few-Layer Mos2 as Nitrogen Protective Barrier(IOP Publishing Ltd., 2017) Akbalı, Barış; Yanılmaz, Alper; Tomak, Aysel; Tongay, Sefaattin; Çelebi, Cem; Şahin, HasanWe report experimental and theoretical investigations of the observed barrier behavior of few-layer MoS2 against nitrogenation. Owing to its low-strength shearing, low friction coefficient, and high lubricity, MoS2 exhibits the demeanor of a natural N-resistant coating material. Raman spectroscopy is done to determine the coating capability of MoS2 on graphene. Surface morphology of our MoS2/graphene heterostructure is characterized by using optical microscopy, scanning electron microscopy, and atomic force microscopy. In addition, density functional theory-based calculations are performed to understand the energy barrier performance of MoS2 against nitrogenation. The penetration of nitrogen atoms through a defect-free MoS2 layer is prevented by a very high vertical diffusion barrier, indicating that MoS2 can serve as a protective layer for the nitrogenation of graphene. Our experimental and theoretical results show that MoS2 material can be used both as an efficient nanocoating material and as a nanoscale mask for selective nitrogenation of graphene layer.Article Citation - WoS: 36Citation - Scopus: 38Effect of Molecular Architecture on Cell Interactions and Stealth Properties of Peg(American Chemical Society, 2017) Özer, İmran; Tomak, Aysel; Zareie, Hadi M.; Baran, Yusuf; Bulmuş, VolgaPEGylation, covalent attachment of PEG to therapeutic biomolecules, in which suboptimal pharmacokinetic profiles limiting their therapeutic utility are of concern, is a widely applied technology. However, this technology has been challenged by reduced bioactivity of biomolecules upon PEGylation and immunogenicity of PEG triggering immune response and abrogating clinical efficacy, which collectively necessitate development of stealth polymer alternatives. Here we demonstrate that comb-shape poly[oligo(ethylene glycol) methyl ether methacrylate] (POEGMA), a stealth polymer alternative, has a more compact structure than PEG and self-organize into nanoparticles in a molecular weight dependent manner. Most notably, we show that comb-shape POEGMA promotes significantly higher cellular uptake and exhibits less steric hindrance imposed on the conjugated biomolecule than PEG. Collectively, comb-shape POEGMA offers a versatile alternative to PEG for stealth polymer-biomolecule conjugation applications.Article Citation - WoS: 54Citation - Scopus: 53Nitrogen Doping for Facile and Effective Modification of Graphene Surfaces(Royal Society of Chemistry, 2017) Yanılmaz, Alper; Tomak, Aysel; Akbalı, Barış; Bacaksız, Cihan; Özçeri, Elif; Arı, Ozan; Senger, Ramazan Tuğrul; Selamet, Yusuf; Zareie, Hadi M.We report experimental and theoretical investigations of nitrogen doped graphene. A low-pressure Chemical Vapor Deposition (CVD) system was used to grow large-area graphene on copper foil, using ethylene as the carbon source. Nitrogen-doped graphene (N-graphene) was prepared by exposing the graphene transferred to different substrates to atomic nitrogen plasma. The effect of varying nitrogen flow rates on doping of graphene was investigated while keeping the power and time constant during the process. The N-graphene was characterized via Raman Spectroscopy, X-ray Photoelectron Spectroscopy (XPS), Scanning Tunneling Microscopy and Spectroscopy (STM and STS), and Fourier Transform Infrared spectroscopy (FTIR). Raman mapping of N-graphene was also performed to show homogeneity of nitrogen on the graphitic lattice. XPS results have revealed the presence of different nitrogen configurations in the graphitic lattice with similar doping concentrations. Density functional theory (DFT) based calculations showed that the periodic adsorption of N atoms predominantly occurs on top of the C atoms rather than through substitution of C in our N-graphene samples. Our results indicate a feasible procedure for producing N-graphene with homogenous and effective doping which would be valuable in electronic and optical applications.Article Citation - WoS: 2Citation - Scopus: 2Structural Changes in a Schiff Base Molecular Assembly Initiated by Scanning Tunneling Microscopy Tip(IOP Publishing Ltd., 2016) Tomak, Aysel; Bacaksız, Cihan; Mendirek, Gizem; Şahin, Hasan; Hür, Deniz; Görgün, Kamuran; Senger, Ramazan Tuğrul; Birer, Özgür; Peeters, François M.; Zareie, Hadi M.We report the controlled self-organization and switching of newly designed Schiff base (E)-4-((4-(phenylethynyl) benzylidene) amino) benzenethiol (EPBB) molecules on a Au (111) surface at room temperature. Scanning tunneling microscopy and spectroscopy (STM/STS) were used to image and analyze the conformational changes of the EPBB molecules. The conformational change of the molecules was induced by using the STM tip while increasing the tunneling current. The switching of a domain or island of molecules was shown to be induced by the STM tip during scanning. Unambiguous fingerprints of the switching mechanism were observed via STM/STS measurements. Surface-enhanced Raman scattering was employed, to control and identify quantitatively the switching mechanism of molecules in a monolayer. Density functional theory calculations were also performed in order to understand the microscopic details of the switching mechanism. These calculations revealed that the molecular switching behavior stemmed from the strong interaction of the EPBB molecules with the STM tip. Our approach to controlling intermolecular mechanics provides a path towards the bottom-up assembly of more sophisticated molecular machines.