Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
3 results
Search Results
Article Citation - WoS: 2Citation - Scopus: 1Cross-Linked Carboxymethyl Cellulose Biosorbent for Zinc Removal: a Sustainable Remediation of Heavy Metal-Polluted Waters(Springer Heidelberg, 2025) Celgan, Dilber; Karadag, Asiye; Karim, Barna Jalaluddin Mohammad; Recepoglu, Yasar Kemal; Arar, OzgurThis study focuses on the preparation and characterization of cross-linked carboxymethyl cellulose (CMC) biosorbent for efficient removal of Zn2(+) ions from aqueous solutions. The microstructural features of the biosorbent were examined using scanning electron microscopy (SEM), while elemental analysis was conducted using an elemental analyzer to determine carbon (C), hydrogen (H), nitrogen (N), and sulfur (S) content. Fourier transform infrared (FTIR) spectroscopy was employed to identify functional groups within the biosorbent. Sorption experiments revealed that increasing the biosorbent dose led to higher Zn2(+) removal rates until equilibrium was reached. The optimal pH for Zn2(+) removal was determined to be >= 5, attributed to the conversion of acetate group to its ionic form. Rapid kinetics were observed, with 99% removal achieved within 5 min. The biosorbent exhibited a maximum sorption capacity of 10.809 mg/g and a removal rate of 99% at pH 5. Desorption studies demonstrated efficient Zn2(+) recovery using 0.25 M HCl solution, with a total desorption rate exceeding 99%. The findings indicate the potential for cost-effective regeneration of the biosorbent using dilute acid solutions, enhancing its sustainability and practical applicability in water purification processes. Additionally, the biosorbent's selectivity for Zn2(+) ions over competing ions and its effectiveness in treating real water samples, including those containing Na+, K+, Ca2(+), and Mg2(+), highlight its suitability for practical water purification applications.Article Citation - WoS: 55Citation - Scopus: 60Effect of Regeneration Temperature on Adsorption Equilibria and Mass Diffusivity of Zeolite 13x-Water Pair(Elsevier Ltd., 2016) Sayılgan, Şefika Çağla; Mobedi, Moghtada; Ülkü, SemraThe adsorption equilibrium and mass diffusivity of zeolite 13X-water pair for different adsorption and regeneration temperatures were determined by a homemade volumetric system. The isotherms of the zeolite 13X-water pair were obtained by collecting pressure versus time data and applying ideal gas law. The effective diffusivity of the pair was calculated by using long term analytical solution of mass diffusivity based on Fick's law. The experimental study showed that the adsorption capacity of zeolite 13X-water pair was 23% (kg/kg), 21% (kg/kg) and 19% (kg/kg) when the adsorption temperature was 35, 45 and 60 °C respectively for the desorption temperature of 90 °C. Furthermore, the adsorption capacity increased from 22% (kg/kg) to 24% (kg/kg) when the desorption temperature was increased from 90 °C to 150 °C. It was observed that the present adsorption equilibrium results were compatible with the reported results in the literature. The mass diffusivity of the pair was found in the range of 4 × 10-9-6 × 10-8 m2/s for the long time period when the initial adsorptive pressure was 2000 Pa. The effective mass diffusivity depends on concentration and it was decreased with increasing adsorbate concentration.Article Citation - WoS: 56Citation - Scopus: 59Suzuki Cross-Coupling Reaction of Aryl Halides With Arylboronic Acids Catalysed by Pd(ii)-Nay Zeolite(Elsevier Ltd., 2003) Bulut, Hatice; Artok, Levent; Yılmaz, SelahattinPd(II)-exchanged NaY zeolite showed high activity in the Suzuki cross-coupling reactions of aryl bromides and iodides without added ligands. The DMF:water ratio, and the type and amount of base were found to be critical for the efficiency of the reaction. The catalyst is reusable after regeneration.