Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
4 results
Search Results
Article Citation - WoS: 11Citation - Scopus: 11A Numerical Study on Determination of Volume Averaged Thermal Transport Properties of Metal Foam Structures Using X-Ray Microtomography Technique(Taylor & Francis, 2018) Çelik, Hasan; Özkol, Ünver; Mobedi, Moghtada; Mobedi, Moghtada; Nakayama, Akira; Özkol, Ünver; 03.10. Department of Mechanical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyVolume averaged thermal transport properties of two metal foams with 10 and 20 PPI are obtained by using microtomography technique. The digital 3D structures of samples are generated in computer environment. The governing equations are solved for the entire domain and the volume averaged technique is used to determine interfacial heat transfer coefficient, longitudinal and transverse thermal dispersion conductivity. The study is performed for the pore scale Reynolds number from 100 to 600. The obtained results are within the ranges of the suggested correlations in literature. The present study supports the correlations suggested by Calmidi and Mahajan (2000) and Zhang et al. (2016).Article Citation - WoS: 6Citation - Scopus: 6A Study on Numerical Determination of Permeability and Inetia Coefficient of Aluminum Foam Using X-Ray Microtomography Techniques: Focus on Inspection Methods for Reliability (permeability and Inertia Coefficient by Tomography)(Begell House, 2019) Mobedi, Moghtada; Mobedi, Moghtada; Nakayama, Akira; Özkol, Ünver; Özkol, Ünver; Çelik, Hasan; 03.10. Department of Mechanical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyThe volume-averaged (i.e., macroscopic) transport properties such as permeability and inertia coefficient of two aluminum foams with 10 and 20 pores per inch (PPI) pore density are found using microtomography images. It is shown that a comparison between the numerical values and the experimental results may not be sufficient to prove the correctness of the obtained results. Hence, in addition to traditional validation methods such as grid independency and comparison with reported results in literature, further inspections such as (a) checking the development of flow, (b) inspection of Darcy and non-Darcy regions, (c) conservation of flow rate through the porous media, (d) sufficiency of number of voxels in the narrow throats, and (e) observation of transverse velocity gradients in pores for high and low Reynolds numbers can be performed to further validate the achieved results. These techniques have been discussed and explained in detail for the performed study. Moreover, the obtained permeability and inertia coefficient values are compared with 19 reported theoretical, numerical, and experimental studies. The maximum deviation between the present results and the reported studies for 10 PPI is below 25%, while for 20 PPI it is below 28%.Conference Object Computational Determination of Volume Averaged Transport Properties of Heat and Fluid Flow in Porous Media by Using Microtomography Images(Begell House, 2017) Çelik, Hasan; Mobedi, Moghtada; Mobedi, Moghtada; Özkol, Ünver; Nakayama, Akira; Özkol, Ünver; 03.10. Department of Mechanical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyIn this study, the theory and techniques for obtaining VAM (Volume Average Theory) transport properties of a porous medium from micro-tomography images are described. The validation of the results with reported experimental or numerical values in literature may not be sufficient, hence a comprehensive attention is paid to the techniques that can be used for verification of the obtained numerical results at each step of this long computational process. The suggested verification techniques are categorized and explained in details. © 2017, Begell House Inc. All Rights Reserved.Article Citation - WoS: 15Citation - Scopus: 16A Pore Scale Analysis for Determination of Interfacial Convective Heat Transfer Coefficient for Thin Periodic Porousmedia Undermixed Convection(Emerald Group Publishing Ltd., 2017) Çelik, Hasan; Özkol, Ünver; Mobedi, Moghtada; Mobedi, Moghtada; Manca, Oronzio; Özkol, Ünver; 03.10. Department of Mechanical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyPurpose - The purpose of this study is to determine interfacial convective heat transfer coefficient numerically, for a porous media consisting of square blocks in inline arrangement under mixed convection heat transfer. Design/methodology/approach - The continuity, momentum and energy equations are solved in dimensionless form for a representative elementary volume of porous media, numerically. The velocity and temperature fields for different values of porosity, Ri and Re numbers are obtained. The study is performed for the range of Ri number from 0.01 to 10, Re number from 100 to 500 and porosity value from 0.51 to 0.96. Based on the obtained results, the value of the interfacial convective heat transfer coefficient is calculated by using volume average method. Findings - It was found that at low porosities (such as 0.51), the interfacial Nusselt number does not considerably change with Ri and Re numbers. However, for porous media with high Ri number and porosity (such as 10 and 0.51, respectively), secondary flows occur in the middle of the channel between rods improving heat transfer between solid and fluid, considerably. It is shown that the available correlations of interfacial heat transfer coefficient suggested for forced convection can be used for mixed convection for the porous media with low porosity (such as 0.51) or for the flow with low Ri number (such as 0.01). Originality/value - To the best of the authors' knowledge, there is no study on determination of interfacial convective heat transfer coefficient for mixed convection in porous media in literature. The present study might be the first study providing an accurate idea on the range of this important parameter, which will be useful particularly for researchers who study on mixed convection heat transfer in porous media, macroscopically.