Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
6 results
Search Results
Article Citation - WoS: 6Citation - Scopus: 6Inverse Effects of Lanthanide Co-Doping on the Photocatalytic Hydrogen Production and Dye Degradation Activities of Cu Doped Sol-Gel Tio<sub>2</Sub>(Elsevier, 2023) Yurtsever, Husnu Arda; Erzin, Kubilay; Ciftcioglu, Muhsin; Yurtsever, Hüsnü Arda; Erzin, Kubilay; Çiftçioğlu, MuhsinCopper doped and lanthanide-copper co-doped titania powders were prepared by sol-gel technique and the effects of co-doping on the photocatalytic reduction and oxidation activities of titania were investigated in this work. Characterization studies indicated that a reduced structure was formed due to the presence of Ti3+ species in copper doped titania powder and a more stable structure was formed when lanthanides were used as co-dopants. Copper doped powder had a significantly higher activity in photocatalytic hydrogen production (1037 mu mol/g/h) than the co-doped powders (similar to 400 mu mol/g/h). The oxidation activities of co-doped powders however were determined to be about 2 times higher than that of the copper doped powder. The decrease in the reduction activity was attributed to the decrease in the number of Ti3+ sites, whereas the increase in oxidation activity was probably a result of the increase in the surface area and dye adsorption due to lanthanide co-doping.Article Citation - WoS: 6Citation - Scopus: 8The Effect of Powder Preparation Method on the Artificial Photosynthesis Activities of Neodymium Doped Titania Powders(Elsevier, 2018) Yurtsever, Hüsnü Arda; Çiftçioğlu, MuhsinThe effects of nanostructure on the artificial photosynthesis activities of undoped and Nd doped titania (TiO2) powders prepared by three different chemical co-precipitation methods were investigated. Substitutional/interstitial N and S doping was observed in powders due to the presence of high concentrations of HNO3 (NP) and H2SO4 (SP) in the powder preparation media, respectively. Nd, N and S doping caused anatase/rutile phase transformation inhibition and crystallite size reduction in the nanostructure. Light absorption was significantly enhanced by Nd doping and the residual SO42-/NOx species in the nanostructure. Photocatalytic hydrogen production activity of Nd doped NP powder was 4 times greater than undoped NP powder at 700 degrees C and had a high purity (CO:H-2 ratio similar to 0.00). CO was determined to be the main product in photocatalytic CO2 reduction. NP powders had the highest CO yields and Nd doping enhanced CO production. The powders with high crystallite sizes and rutile weight fractions had the highest artificial photosynthesis activities. (C) 2018 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.Article Citation - WoS: 4Citation - Scopus: 3Modification of Surface Charge Characteristics for Unsupported Nanostructured Titania-Zirconia Uf/Nf Membrane Top Layers With Calcination Temperature(Springer, 2020) Erdem, İlker; Çiftçioğlu, MuhsinCeramic membranes are more advantageous alternatives especially for harsh working conditions when compared with the polymeric membranes. The porous multilayer structure of the ceramic membranes (composed of support, intermediate, and top layers) can be prepared via different oxides. Titania and zirconia, having superior properties, are mainly preferred for the top layer formation. The separation properties of the membrane are both dependent on pore morphology and surface charge of the oxide(s) forming the top layer. The effect of surface charge in separation may be very significant in case of filtration of charged species with relatively lower mass as in the ultrafiltration (UF) and nanofiltration (NF). In this study, unsupported membrane top layers were prepared with varying titania/zirconia ratios by sol-gel technique. Their surface charges at different pH conditions after calcination at varying temperatures (400 degrees, 500 degrees, and 600 degrees C) were determined. The surface charge of the pure titania (full Ti) top layer was decreasing with the increasing calcination temperature. The highest magnitudes of zeta potential for both acidic and basic conditions were measured via Zr rich top layer (TiZr2575) at calcination temperatures >= 500 degrees C, which was composed of anatase, rutile (titania), and tetragonal (zirconia) phases after calcination. The tailor-made top layer can be prepared with modifications during membrane preparation.Article Citation - Scopus: 2The Surface Charge of Unsupported Nano-Structured Titania Ceramic Membrane Top Layers With Varying Calcination Temperatures(University of Chemical Technology and Metallurgy, 2019) Erdem, İlker; Çiftçioğlu, MuhsinTitania is one of the most preferable ceramic membrane materials of superior durability (as zirconia) when compared to that of other ceramics, e.g. alumina or silica. The surface charge of the membrane top layer is an important parameter of the separation performance of the multilayer ceramic membrane due to the Donnan exclusion mechanisms. In this study, the change of the surface charge of unsupported nano-structured titania top layer is investigated with calcination temperature variation. The effect observed indicates the possibility of preparation of tailor-made top layers for multilayer ceramic membranes. © 2019, University of Chemical Technology and Metallurgy.Article Citation - WoS: 48Citation - Scopus: 49The Effect of Rare Earth Element Doping on the Microstructural Evolution of Sol-Gel Titania Powders(Elsevier Ltd., 2017) Yurtsever, Hüsnü Arda; Çiftçioğlu, MuhsinThe development of a better understanding of the low temperature nanophase evolution of high surface area titania (TiO2) based powders is essential for their use in photocatalytic applications. A series of rare earth (RE) element doped TiO2 powders were prepared by sol-gel processing. The effects of RE doping level, ionic size and heat treatment temperature on the nanophase structure evolution and the dopant ion location in TiO2 main matrix were investigated. Anatase was determined to be the main phase up to 900 °C at all doping levels for all REs. Anatase to rutile phase transformation was inhibited by RE doping. The inhibitory effect of REs increased with increasing ionic radius. Oxide phases of La, Nd, Pr, Sm were not present up to 5% and Nd4Ti9O24 phase was formed at 10% doping level at 800 °C. The formation of RE2Ti2O7 phases were determined for the REs with relatively lower ionic radii at 800 °C.Conference Object Citation - WoS: 5Citation - Scopus: 5Preparation and Microstuructural Development of Nanocrystalline Titania and Alumina(Trans Tech Publications, 2004) Çağlar Duvarcı, Özlem; Çiftçioğlu, Muhsin; Güden, Mustafa; Arıkut, G.The preparation of nanocrystalline titania and alumina was investigated by sol-gel methods using titanium isopropoxide, boehmite and aluminum isopropoxide. Various drying control chemical additives like oxalic acid, acetic acid and polyacrylic acid were used for modifying the drying behaviour and shrinkage of the gels. The sintered densities of the ceramics prepared by sol-gel processing and the dried gels were in the 79-99% of theoretical density for rutile. The green and sintered densities of the pellets prepared by uniaxial pressing of powders derived from sols, gels and precipitation techniques for titania were in the 40-52% and 55-83% respectively. The titania ceramics were observed to experience anatase-rutile phase transformation upon heat treatment at 650oC. The grain size of the sintered ceramics at 650oC was determined to be about 26 nm. Grain size of titania increased to 213 nm. at 850oC. The mechanical properties of these nanocrystalline ceramics were investigated by using microhardness testing.