Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/11147/7148

Browse

Search Results

Now showing 1 - 10 of 24
  • Article
    Citation - WoS: 7
    Citation - Scopus: 10
    Enhanced Light–matter Interaction in a Hybrid Photonic–plasmonic Cavity
    (Springer, 2021) Gökbulut, Belkıs; İnanç, Arda; Topçu, Gökhan; Özçelik, Serdar; Demir, Mustafa Muammer; İnci, Mehmet Naci
    Strongly concentrated optical fields around a metal nanoparticle in the close vicinity of a dipole noticeably facilitate dramatic changes in the localized density of states due to hybrid photonic–plasmonic mode couplings as compared to that of the pure cavity mode fields. Significant variations of the field intensity in the presence of the metal nanoparticle elucidate enhanced light–matter interaction in a hybrid structure. The enhancement factor of the light–matter interaction is studied through the single-atom cooperativity parameter, which is directly proportional to the ratio of the fluorescence lifetimes of the off-resonant and on-resonant emission. A compact and cost-effective hybrid device, which includes a microfiber cavity, supporting whispering gallery modes, and a well-defined solid nanostructure, consisting of a gold nanoparticle core, overcoated by a silica shell, and decorated with CdS/CdSe quantum dots, is demonstrated to offer an outstanding potential for the enhancement of light–matter interaction. Surface plasmons of a gold nanoparticle, placed inside a hollow cylindrical nanostructure at the surface of a microfiber, are activated upon excitation of the dipoles of the quantum emitters, which are on-resonance with the whispering gallery mode. Time-resolved experiments demonstrate that the single-atom cooperativity parameter of the quantum dots is enhanced by a factor of about 4.8 in the presence of the gold nanoparticle being simultaneously in strong interaction with the cavity mode field and the metal nanoparticle’s surface plasmons.
  • Correction
    Correction To: Enhanced Light–matter Interaction in a Hybrid Photonic–plasmonic Cavity
    (Springer, 2022) Gökbulut, Belkıs; İnanç, Arda; Topçu, Gökhan; Özçelik, Serdar; Demir, Mustafa Muammer; İnci, Mehmet Naci
    In this article the statement in the Funding information section was incorrect. The correct Funding information is as follows. ‘Dr Belkıs Gökbulut acknowledges TUBITAK for the financial support provided under Contract Number 120F323’.
  • Article
    Citation - WoS: 3
    Citation - Scopus: 5
    Physically Unclonable Security Patterns Created by Electrospinning, and Authenticated by Two-Step Validation Method
    (IOP Publishing, 2022) Taşcıoğlu, Didem; Atçı, Arda; Sevim Ünlütürk, Seçil; Özçelik, Serdar
    Counterfeiting is a growing economic and social problem. For anticounterfeiting, random and inimitable droplet/fiber patterns were created by the electrospinning method as security tags that are detectable under UV light but invisible in daylight. To check the authenticity of the original security patterns created; images were collected with a simple smartphone microscope and a database of the recorded original patterns was created. The originality of the random patterns was checked by comparing them with the patterns recorded in the database. In addition, the spectral signature of the patterns in the droplet/fiber network was obtained with a simple and hand-held spectrometer. Thus, by reading the spectral signature from the pattern, the spectral information of the photoluminescent nanoparticles was verified and thus a second-step verification was established. In this way, anticounterfeiting technology that combines ink formula, unclonable security pattern creation and two-level verification is developed.
  • Article
    Citation - WoS: 2
    Citation - Scopus: 3
    1-Octanol Is a Functional Impurity Modifying Particle Size and Photophysical Properties of Colloidal Zncdsse/Zns Nanocrystals
    (American Chemical Society, 2021) Sevim Ünlütürk, Seçil; Çağır, Ali; Varlıklı, Canan; Özçelik, Serdar
    Impurities in trioctylphophine (TOP) strongly affect nanocrystal synthesis. 1-Octanol among other contaminants in TOP is identified for the first time as a functional impurity by H-1 NMR. The deliberate addition of 1-octanol into trioctylphosphine reduced particle size and modified photophysical properties of ZnCdSSe/ZnS colloidal nanocrystals. NMR analysis furthermore revealed that 1-octanol is bonded to the nanocrystal surfaces. The ratio of integrals for the O-CH2 protons of 1-octanol, which is the lowest compared to the other ligands, suggests that 1-octanol plays a critical role to tune the particle size of nanocrystals. The increased amount of 1-octanol added into TOP reduces the particle size from 9.8 to 7.2 nm, causing a progressive blue shift in the UV-vis and PL spectra but leaving the alloy composition unaffected. The rate of nonradiative processes is enhanced with the amount of 1-octanol added into TOP, correlating with higher dislocation density observed in the nanocrystals. As a conclusion, 1-octanol is proposed as a functional impurity that varies particle size and nonradiative photophysical processes in the ZnCdSSe/ZnS colloidal nanocrystals.
  • Article
    Citation - WoS: 2
    Citation - Scopus: 2
    Mn2+ Ions Incorporated Into Znsxse1-X Colloidal Quantum Dots: Controlling Size and Composition of Nanoalloys and Regulating Magnetic Dipolar Interactions
    (IOP Publishing, 2021) Ünlütürk, Seçil Sevim; Akdoğan, Yaşar; Özçelik, Serdar
    A facile synthesis method is introduced how to prepare magnetically active ultraviolet emitting manganese ions incorporated into ZnSxSe1-x colloidal quantum dot (nanoalloy) at 110 degrees C in aqueous solutions. The reaction time is the main factor to control the hydrodynamic size from 3 to 10 nm and the precursor ratio is significant to tune the alloy composition. ZnS shell layer on the ZnSxSe1-x core was grown to passivate environmental effects. The nanoalloy has ultraviolet emission at 380 nm having a lifetime of 80 ns and 7% quantum yield. The incorporation of Mn2+ ions into the nanoalloys induced magnetic activity but did not modify the structure and photophysical properties of the nanoalloys. Colloidal and powdery samples were prepared and analyzed by electron paramagnetic resonance (EPR) spectroscopy. In the colloidal dispersions, EPR spectra showed hyperfine line splitting regardless of the Mn2+ ion fractions, up to 6%, indicating that Mn2+ ions incorporated into the nanoalloys were isolated. EPR signals of the powdery samples were broadened when the fraction of Mn2+ ions was higher than 0.1%. The EPR spectra were simulated to reveal the locations and interactions of Mn2+ ions. The simulations suggest that the Mn2+ ions are located on the nanoalloy surfaces. These findings infer that the magnetic dipolar interactions are regulated by the initial mole ratio of Mn/Zn and the physical state of the nanoalloys adjusted by preparation methods.
  • Article
    Citation - WoS: 8
    Citation - Scopus: 8
    Reducing the Efficiency Roll Off and Applied Potential-Induced Color Shifts in Cdse@zns/Zns-based Light-Emitting Diodes
    (American Chemical Society, 2020) Özgüler, Şahika; Diker, Halide; Ünlütürk, Seçil Sevim; Özçelik, Serdar; Varlıklı, Canan
    Green light-emitting CdSe@ZnS/ZnS (QD) nano-particles were synthesized; the photophysical and morphological properties of their films, which were prepared by spin coating from six different concentrations, corresponding to absorbance values of 0.6, 1.1, 1.6, 2.1, 2.8, and 4.0, were determined. Increasing the absorbance value from 0.6 to 4.0 did not change the photophysical properties of QD films to a large extent, whereas it resulted in an increment in QD film thickness from 20 to 110 nm. The films were utilized as an emissive layer in QD light-emitting diodes with poly(9-vinylcarbazole) (PVK), PVK:2-(4-biphenyllyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole (PBD), and PVK:1,3-bis[(4-tert-butylphenyl)-1,3,4-oxadiazolyl]-phenylene (OXD-7) hole-transport layers (HTLs). The presence of PBD or OXD-7 in PVK reduced the efficiency values but played a positive role in the color purity and efficiency roll off. The maximum color temperature and electroluminescence wavelength shifts obtained with applied potential were 109, 50, and 50 K and 11, 5, and 5 nm for pure-PVK, PVK:PBD, and PVK:OXD-7-based devices, respectively. Hole mobility, capacitance (at 10(3) Hz), and charge-transfer efficiency values were 9.0 x 10(-7), 6.8 x 10(-7), and 4.2 x 10(-7) cm(2) V s(-1), 1.7, 1, and 1 nF, and 6.90%, 15.50%, and 16.10% for pure-PVK, PVK:PBD, and PVK:OXD-7-based devices, respectively. Enhanced color purity and lowered efficiency roll off obtained with PVK:PBD and PVK:OXD-7 HTLs were attributed to decreased capacitance, increased charge-transfer efficiency, and reduced Joule heating.
  • Article
    Citation - WoS: 22
    Citation - Scopus: 18
    Nuclear-Targeted Gold Nanoparticles Enhance Cancer Cell Radiosensitization
    (IOP Publishing, 2020) Pratx, Guillem; Özçelik, Serdar
    Radiation therapy aims to kill or inhibit proliferation of cancer cells while sparing normal cells. To enhance radiosensitization, we developed 40 nm-sized gold nanoparticles targeting the nucleus. We exploited a strategy that combined RGD and NLS peptides respectively targeting cancer cell and the nucleus to initiate cell-death activated by x-ray irradiation. We observed that the modified gold nanoparticles were either translocated in the nuclei or accumulated in the vicinity of the nuclei. We demonstrated that x-ray irradiation at 225 kVp energy reduced cell proliferation by 3.8-fold when the nuclear targeted gold nanoparticles were used. We determined that the radiation dose to have a 10% survival fraction was reduced from 11.0 Gy to 7.1 Gy when 10.0 mu g ml(-1)of the NLS/RGD/PEG-AuNP was incubated with A549 cancer cells. We conclude that the peptide-modified gold nanoparticles targeting the nucleus significantly enhance radiosensitization.
  • Article
    Citation - WoS: 6
    Citation - Scopus: 8
    Enhanced Spontaneous Emission Rate in a Low-Q Hybrid Photonic-Plasmonic Nanoresonator
    (American Chemical Society, 2019) Gökbulut, Belkıs; İnanç, Arda; Topçu, Gökhan; Ünlütürk, Seçil Sevim; Özçelik, Serdar; Demir, Mustafa Muammer; İnci, Mehmet Naci
    In this paper, CdTe quantum dots (QDs)-doped single electrospun polymer nanofibers are partially coated with gold nanoparticles to form distinct hybrid photonic-plasmonic nanoresonators to investigate the critical role of the cavity-confined hybrid mode on the modification of the spontaneous emission dynamics of the fluorescent emitters in low-Q photonic cavities. A total enhancement factor of 11.2 is measured via a time-resolved experimental technique, which shows that there is an increase of about three times in the spontaneous emission rate for the QDs-doped gold nanoparticle-decorated nanofibers as they are compared with those uncoated ones. The physical mechanism affecting the spontaneous emission rate of the encapsulated QDs in such a hybrid photonic-plasmonic nanoresonator is explained to be due to regeneration of the mode field in the nanofiber cavity upon the interaction of the dipoles with the surface plasmons of distinctive gold nanoparticles that surround the outer surface of the nanofiber.
  • Article
    Citation - WoS: 42
    Citation - Scopus: 47
    Ph Responsive Glycopolymer Nanoparticles for Targeted Delivery of Anti-Cancer Drugs
    (Royal Society of Chemistry, 2018) Yılmaz, Gökhan; Güler, Emine; Geyik, Caner; Demir, Bilal; Özkan, Melek; Odacı Demirkol, Dilek; Özçelik, Serdar; Timur, Suna; Becer, C. Remzi
    Over the past decade, there has been a great deal of interest in the integration of nanotechnology and carbohydrates. The advances in glyconanotechnology have allowed the creation of different bioactive glyconanostructures for different types of medical applications, especially for drug delivery and release systems. Therefore, the use of more efficient biocompatible nanocarriers with high loading capacity, low overall toxicity and receptor-mediated endocytosis specificity is still in focus for the enhancement of the therapeutic effect. Conjugation of sugar derivatives onto gold nanoparticles presents unique properties that include a wide array of assembling models and size-related electronic, magnetic and optical properties. Here, pH-responsive drug-conjugated glycopolymer-coated gold nanoparticles were prepared by functionalization of gold nanoparticles with thiol-terminated glycopolymers and then subsequent conjugation of doxorubicin (DOX). Among the four different glycopolymers, their drug release, physicochemical characterization (spectroscopy, particle size and surface charge) and in vitro bioapplications with four different cell lines were compared. As a result, pH-sensitive drug delivery via sugar-coated AuNPs was performed thanks to hydrazone linkages between glycopolymers and DOX. Comparative viability tests also demonstrated the efficiency of glycopolymer-DOX conjugates by fluorescence cell imaging. The obtained results reveal that AuNP homoglycopolymer DOX conjugates (P4D) have significant potential, especially in human neuroblastoma cells in comparison to cervical cancer cells and lung cancer cells.
  • Article
    Citation - Scopus: 2
    Enthalpy-Driven Selective Loading of Cdse0.75s0.25 Nanoalloys in Triblock Copolymer Polystyrene-B
    (Elsevier Ltd., 2016) Aşkın, Görkem; Çeçen, Volkan; Ünlütürk, Seçil Sevim; Özçelik, Serdar; Demir, Mustafa Muammer
    CdSe0.75S0.25 nanoalloys were blended with asymmetric triblock copolymer of polystyrene-b-polyisoprene-b-polystyrene(PS-SIS) in tetrahydrofuran. The fraction of styrene block varies from 14 to 22% with respect to isoprene by mass. The morphology of the copolymer cast film experiences a phase change from cylinder to lamella. CdSe0.75S0.25 nanoalloys were prepared by two-phase method. The surface of the nanoalloys was capped by either oleic acid (OA) or n-tri-octylphosphonic acid (TOPO) in situ. The mean diameter of the alloyed particles is around 12 nm in both systems. The chemical nature of the nanoalloy surface was found to influence the dispersion of the particles over polymer volume. The size of the nanoalloy domains in PS is 50 nm, on average, consisting of approximately 0.7 wt% nanoalloys. However, the size of the nanoalloy domains is smaller when they are loaded into PS-SIS. The structure formation is predominantly determined by enthalpic compatibilization. Atomic force microscopy results suggest that the nanoalloys capped with TOPO sequester into PS-rich domains and enlarge the domain. On the other hand, the ones capped with OA prefer to locate in polyisoprene domains. The increase of particles over 1.0 wt% distorts the lamella structure.