Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
6 results
Search Results
Article Citation - WoS: 8Citation - Scopus: 10Spray Analysis of Biodiesels Derived From Various Biomass Resources in a Constant Volume Spray Chamber(American Chemical Society, 2022) Ulu, Anılcan; Yıldız, Güray; Rodriguez, Alvaro Diez; Özkol, ÜnverThis research aimed to analyze the spray characteristics of various biodiesels, which have rarely been investigated in terms of spray analysis in the literature compared to fossil diesel. For this purpose, four different methyl ester-type biodiesels were produced from canola, corn, cottonseed, and sunflower oils. These feedstocks were selected due to their wide availability in Turkey and being among the significant resources for biodiesel production. Measured physical properties of biodiesel samples showed that biodiesel fuels had, on average, 1.7 to 1.9 times higher viscosities, 5.3 to 6.6% larger densities, and 37 to 39.1% higher contact angle values than the reference diesel fuel. Spray characteristics of all fuels were experimentally examined in a constant volume spray chamber under chamber pressures of 0, 5, 10, and 15 bar and injection pressures of 600, 800, and 1000 bar. All tested biodiesels performed, on average, 3 to 20% longer spray penetration lengths, 5 to 30% narrower spray cone angles, and 5-18% lesser spray areas than the reference diesel fuel under chamber pressures of 5 and 10 bar. No significant differences occurred at 15 bar ambient pressure between biodiesels and diesel. In addition, analytical and empirical predictions showed that biodiesels had around 21.2-35.1% larger SMD values and approximately 7% lower air entrainment.Article Citation - WoS: 15Citation - Scopus: 16A Pore Scale Analysis for Determination of Interfacial Convective Heat Transfer Coefficient for Thin Periodic Porousmedia Undermixed Convection(Emerald Group Publishing Ltd., 2017) Çelik, Hasan; Mobedi, Moghtada; Manca, Oronzio; Özkol, ÜnverPurpose - The purpose of this study is to determine interfacial convective heat transfer coefficient numerically, for a porous media consisting of square blocks in inline arrangement under mixed convection heat transfer. Design/methodology/approach - The continuity, momentum and energy equations are solved in dimensionless form for a representative elementary volume of porous media, numerically. The velocity and temperature fields for different values of porosity, Ri and Re numbers are obtained. The study is performed for the range of Ri number from 0.01 to 10, Re number from 100 to 500 and porosity value from 0.51 to 0.96. Based on the obtained results, the value of the interfacial convective heat transfer coefficient is calculated by using volume average method. Findings - It was found that at low porosities (such as 0.51), the interfacial Nusselt number does not considerably change with Ri and Re numbers. However, for porous media with high Ri number and porosity (such as 10 and 0.51, respectively), secondary flows occur in the middle of the channel between rods improving heat transfer between solid and fluid, considerably. It is shown that the available correlations of interfacial heat transfer coefficient suggested for forced convection can be used for mixed convection for the porous media with low porosity (such as 0.51) or for the flow with low Ri number (such as 0.01). Originality/value - To the best of the authors' knowledge, there is no study on determination of interfacial convective heat transfer coefficient for mixed convection in porous media in literature. The present study might be the first study providing an accurate idea on the range of this important parameter, which will be useful particularly for researchers who study on mixed convection heat transfer in porous media, macroscopically.Article Citation - WoS: 100Citation - Scopus: 106Determination of Kozeny Constant Based on Porosity and Pore To Throat Size Ratio in Porous Medium With Rectangular Rods(Taylor and Francis Ltd., 2014) Özgümüş, Türküler; Mobedi, Moghtada; Özkol, ÜnverKozeny-Carman permeability equation is an important relation for the determination of permeability in porous media. In this study, the permeabilities of porous media that contains rectangular rods are determined, numerically. The applicability of Kozeny-Carman equation for the periodic porous media is investigated and the effects of porosity and pore to throat size ratio on Kozeny constant are studied. The continuity and Navier- Stokes equations are solved to determine the velocity and pressure fields in the voids between the rods. Based on the obtained flow field, the permeability values for different porosities from 0.2 to 0.9 and pore to throat size ratio values from 1.63 to 7.46 are computed. Then Kozeny constants for different porous media with various porosity and pore to throat size ratios are obtained and a relationship between Kozeny constant, porosity and pore to throat size ratio is constructed. The study reveals that the pore to throat size ratio is an important geometrical parameter that should be taken into account for deriving a correlation for permeability. The suggestion of a fixed value for Kozeny constant makes the application of Kozeny-Carman permeability equation too narrow for a very specific porous medium. However, it is possible to apply the Kozeny-Carman permeability equation for wide ranges of porous media with different geometrical parameters (various porosity, hydraulic diameter, particle size and aspect ratio) if Kozeny constant is a function of two parameters as porosity and pore to throat size ratios.Article Citation - WoS: 20Citation - Scopus: 26Effect of Urban Geometry on Pedestrian-Level Wind Velocity(Taylor and Francis Ltd., 2014) Arkon, Çelen Ayşe; Özkol, ÜnverThe orientation of the streets and the height of continuous buildings cut off summer breezes and the prevailing wind in Izmir, Turkey. Compared with the northern parts of Turkey, the summer period in Izmir is relatively hot, humid and long. Due to the dense urban structure and the expansion of hard surface materials, the temperature in the city centre is higher than this centre's surroundings and this effect is called the urban heat island. Consequently, pedestrian comfort in the city drops dramatically especially in locations where the wind flow is obstructed by buildings. In addition, natural ventilation through the building façades is weakened due to the low average wind speed in the streets. For better outdoor and indoor comfort the citizens in Izmir should benefit from the prevailing wind and summer breezes locally named imbat in the sea-land direction. Therefore, the existing situation is examined through the field study in order to understand the natural ventilation potential at the pedestrian level in the selected main streets in Izmir.Article Citation - WoS: 33Citation - Scopus: 35Thermal Dispersion in Porous Media - a Review on the Experimental Studies for Packed Beds(American Society of Mechanical Engineers, 2013) Özgümüş, Türküler; Mobedi, Moghtada; Özkol, Ünver; Nakayama, AkiraThermal dispersion is an important topic in the convective heat transfer in porous media. In order to determine the heat transfer in a packed bed, the effective thermal conductivity including both stagnant and dispersion thermal conductivities should be known. Several theoretical and experimental studies have been performed on the determination of the effective thermal conductivity. The aim of this study is to review the experimental studies done on the determination of the effective thermal conductivity of the packed beds. In this study, firstly brief information on the definition of the thermal dispersion is presented and then the reported experimental studies on the determination of the effective thermal conductivity are summarized and compared. The reported experimental methods are classified into three groups: (1) heat addition/removal at the lateral boundaries, (2) heat addition at the inlet/ outlet boundary, (3) heat addition inside the bed. For each performed study, the experimental details, methods, obtained results, and suggested correlations for the determination of the effective thermal conductivity are presented. The similarities and differences between experimental methods and reported studies are shown by tables. Comparison of the correlations for the effective thermal conductivity is made by using figures and the results of the studies are discussed. Copyright © 2013 by ASME.Article Citation - WoS: 24Citation - Scopus: 27Visualization of Diffusion and Convection Heat Transport in a Square Cavity With Natural Convection(Elsevier Ltd., 2010) Mobedi, Moghtada; Özkol, Ünver; Sunden, BengtIn this study, the total heatfunction equation which includes diffusion and convection transport is divided into the corresponding heatfunction equations. The superposition rule is used to obtain the mathematical definitions of diffusion and convection heatfunctions and corresponding boundary conditions. It is observed that the separate visualization of diffusion and convection heatlines provides significant information on understanding of the mechanism of heat transfer in a convective flow. The direction of the diffusion and convection heat transport as well as the strength of convection compared to the conduction in entire or in a portion of a domain can be visualized. The diffusion heatlines demonstrate a potential flow like behavior while convective heat flow rotates due to the source term of the convection heatfunction equation, similar to the rotation of fluid flow generated by fluid flow vorticity. The similarity between the streamfunction and the total heatfunction yields a concept of heat flow vorticity, Ωt. The obtained results show that the maximum absolute value of the convection heatfunction may be an appropriate parameter for determination of the convection strength. The diffusion and convection heatfunction equations for natural convection in a differentially heated square cavity for four different length of the heated surface on the right vertical wall as sp = L/4, L/2, 3L/4 and L and a fixed length of the cooled surface on the right vertical wall as L/4 are obtained and corresponding heatlines are drawn. The values of the conduction heatfunction are positive while the sign of convection heatfunction values is negative for the studied cases. Based on the distribution of total heatlines, two regions are detected in the cavity, an active region with the positive values of heatlines signifying dominant conduction heat transfer and a passive region with the negative heatfunction values in where convection heat flow is dominant and heat only rotates in a closed contour pattern. The variations of average Nusselt number, average of heat flow vorticity, maximum absolute values of convection heatfunction and streamfunction at different Rayleigh numbers and lengths of the heated surface are presented.