Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
4 results
Search Results
Article Citation - WoS: 15Citation - Scopus: 17Effect of Substrate Rotation Speed and Off-Center Deposition on the Structural, Optical, and Electrical Properties of Azo Thin Films Fabricated by Dc Magnetron Sputtering(American Institute of Physics, 2018) Aygün, Gülnur; Aygün, Gülnur; Köseoğlu, Hasan; Özdemir, Mehtap; Özdemir, Mehtap; Özyüzer, Lütfi; Özyüzer, Lütfi; Özyüzer, Gülnur Aygün; Özyüzer, Lütfi; 04.05. Department of Pyhsics; 04. Faculty of Science; 01. Izmir Institute of TechnologyIn this study, aluminum-doped zinc oxide (AZO) thin films were deposited by DC magnetron sputtering at room temperature. The distance between the substrate and target axis, and substrate rotation speed were varied to get high quality AZO thin films. The influences of these deposition parameters on the structural, optical, and electrical properties of the fabricated films were investigated by X-ray diffraction (XRD), Raman spectroscopy, spectrophotometry, and four-point probe techniques. The overall analysis revealed that both sample position and substrate rotation speed are effective in changing the optical, structural, and electrical properties of the AZO thin films. We further observed that stress in the films can be significantly reduced by off-center deposition and rotating the sample holder during the deposition. An average transmittance above 85% in the visible range and a resistivity of 2.02 × 10-3Ω cm were obtained for the AZO films.Article Citation - WoS: 42Citation - Scopus: 46Importance of Cds Buffer Layer Thickness on Cu2znsns4-Based Solar Cell Efficiency(IOP Publishing Ltd., 2018) Cantaş, Ayten; Türkoğlu, Fulya; Aygün, Gülnur; Akça, Fatime Gülşah; Özdemir, Mehtap; Tarhan, Enver; Özyüzer, Lütfi; Özyüzer, Gülnur Aygün; Özdemir, Mehtap; Özyüzer, Lütfi; Tarhan, Enver; 04.05. Department of Pyhsics; 04. Faculty of Science; 01. Izmir Institute of TechnologyCu2ZnSnS4 (CZTS) thin films were grown on Mo-coated soda lime glass (SLG) substrates by the sulfurization of DC magnetron-sputtered Zn, Sn and Cu metallic precursors under a sulfur atmosphere at 550 °C for 45 min. Understanding the composition and structure of the CZTS absorber layer is necessary to obtain efficient solar cells. With this aim, x-ray diffractometry, Raman spectroscopy, scanning electron microscopy, energy dispersive spectroscopy and x-ray photoelectron spectroscopy were used to investigate the CZTS absorber layers. CZTS absorber films were obtained and found to be Cu-poor and Zn-rich in composition, which are both qualities desired for efficient solar cells. CdS was used as a buffer layer and was grown by the chemical bath deposition technique. The optical properties of CdS films on SLG were searched for using a spectroscopic ellipsometer and the results revealed that the bandgap increases with film thickness increment. CZTS-based solar cells with different CdS buffer layer thicknesses were prepared using a SLG/Mo/CZTS/CdS/ZnO/AZO solar cell configuration. The influence of the CdS buffer layer thickness on the performance of the CZTS solar cells was investigated. Device analysis showed that electrical characteristics of solar cells strongly depend on the buffer layer's thickness. Highly pronounced changes in V OC, fill factor and J SC parameters, which are the main efficiency limiting factors, with changing buffer layer thicknesses were observed. Our experiments confirmed that decreasing the CdS thickness improved the efficiency of CZTS solar cells down to the lowest thickness limit.Conference Object Citation - WoS: 7Citation - Scopus: 8Properties of Reactive O2 Ion Beam Sputtered Tio2 on Si Wafers(National Institute of Optoelectronics, 2005) Ulucan, Savaş; Özyüzer, Gülnur Aygün; Aygün, Gülnur; Eğilmez, Mehmet; Özyüzer, Lütfi; 04.05. Department of Pyhsics; 04. Faculty of Science; 01. Izmir Institute of TechnologyTiO2 thin films were deposited on silicon (100) p-type wafers, using the reactive ion beam sputtering method in high vacuum as an alternative to conventional Argon ion beam sputtering in an O2 environment. Oxygen ions with 1000 eV energy were formed in a thruster and bombarded a high purity Ti target. The molecules of TiO2 were deposited on a Si (100) wafer at various substrate temperatures. The structural and optical properties were analyzed using Fourier Transform Infrared Spectroscopy in the range of 400-4000 cm-1. An ellipsometer was used to measure the thickness and refractive index of the deposited films. In order to determine the dielectric constant and capacitance of the deposited TiO2, the electrical properties were studied using an MOS capacitor. The effects of substrate temperature and deposition time on the dielectric properties of TiO2 are discussed.Article Citation - WoS: 22Citation - Scopus: 22Oxidation of Si Surface by a Pulsed Nd: Yag Laser(IOP Publishing Ltd., 2004) Özyüzer, Gülnur Aygün; Atanassova, Elenada A.; Aygün, Gülnur; Özyüzer, Lütfi; Turan, Raşit; 04.05. Department of Pyhsics; 04. Faculty of Science; 01. Izmir Institute of TechnologySiO2 thin films have been obtained by 1064 nm Nd: YAG laser oxidation of p-Si in the presence of O2. The thickness uniformity, dielectric and electrical properties of the layers have been studied. The effect of both the laser beam energy density and the substrate temperature on the oxide growth is also discussed. It was established that there exists an interval of laser beam energy density in which the oxidation occurs without surface melting. The oxidation process is controlled by the laser beam energy density rather than by the substrate temperature (673-748 K) and the higher laser power results in a thicker oxide. X-ray photoelectron spectroscopy (XPS) was used to provide information on the oxide composition. XPS results revealed that the as-grown oxide is a mixed layer of SiO2 and Si2O, which are distributed nonuniformly through the depth. MOS capacitors fabricated on the grown oxide exhibited typical capacitance-voltage, conductance-voltage characteristics. However, the density of interface states and oxide charge density were found to be higher than the typical values of thermally grown oxides. The quality of the oxide layers can be further improved by optimization of the process parameters and/or by post-processing of the grown films. It is concluded that the SiO2 films formed by the technique of Nd: YAG laser-enhanced oxidation at low temperature are potentially useful for device applications.