Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
24 results
Search Results
Article Influence of High Content of Sodium Doping in Bi(pb)2212 Superconductors(Pleiades Publishing, 2023) Faiza, Bouaïcha; Mosbah, Mohamed-Fayçal; Özyüzer, LütfiAbstract: We study here, the effect of high content of sodium doping on structural and electrical properties of Bi(Pb)2212 superconductors. The X-ray analysis results showed that all the prepared samples mainly belong to the superconducting tetragonal phase Bi–(Pb)2212. SEM micrographs show that the grains are closely related and have a characteristic flat shape for the superconductor Bi (Pb) 2212. For the undoped sample, the grains are randomly distributed with an average size of 5 μm. For doped samples, the morphology changes with sodium concentration. Resistivity measurements show that all samples have a superconducting character. © 2023, Pleiades Publishing, Ltd.Article Citation - WoS: 6Citation - Scopus: 5Structural and Optical Characteristics of Antimony Selenosulfide Thin Films Prepared by Two-Step Method(Springer, 2022) Türkoğlu, Fulya; Ekren, Memduh Emirhan; Cantaş, Ayten; Yakıncı, Kübra; Gündoğan, Hazal; Aygün, Gülnur; Özyüzer, LütfiAntimony triselenide (Sb2Se3) is one of the most promising absorber material choices among the inorganic semiconductors that has attracted much attention today. However, highest recorded efficiencies for Sb2Se3 solar cells are still lower than ideal. Exploring antimony selenosulfide (Sb-2(SxSe1-x)(3)) to increase device performance is one option because some features of alloyed Sb-2(SxSe1-x)(3) depend on composition such as bandgap and band position. In this study, two-step process was used to grow Sb-2(SxSe1-x)(3) thin films. In the first stage, Sb2Se3 thin films were deposited on soda lime glass substrates using direct current magnetron sputtering technique. In the second stage, Sb2Se3 thin films were exposed to sulfurization process in a quartz ampoule to obtain Sb-2(SxSe1-x)(3) thin films. Characterization results showed that morphological, optical, and structural properties of Sb-2(SxSe1-x)(3) thin films grown by presented method were highly dependent on amount of sulfur in the films. By the adjustment of the S/S + Se atomic ratio, Sb-2(SxSe1-x)(3) absorber materials with suitable bandgap, favorable orientation and compact morphology can be obtained for photovoltaic applications.Article Citation - WoS: 4Citation - Scopus: 5Enhanced Optoelectronic Properties of Magnetron Sputtered Ito/Ag Multilayers by Electro-Annealing(AVS, 2022) Uyanık, Zemzem; Türkoğlu, Fulya; Köseoğlu, Hasan; Ekmekçioğlu, Merve; Ata, Bengü; Demirhan, Yasemin; Özdemir, Mehtap; Aygün, Gülnur; Özyüzer, LütfiIndium tin oxide/silver/indium tin oxide (ITO/Ag/ITO) multilayers have attracted much attention to fulfill the growing need for high-performance transparent conducting oxide electrodes. To make these transparent multilayers work better, electro-annealing, which is a method of self-heating by electric current, can be effective. Moreover, the effect of current on ITO/Ag/ITO multilayers should be investigated to make sure that electronic devices will be reliable over their lifetime. In this study, ITO/Ag/ITO multilayer electrodes with varying Ag thicknesses were grown by DC magnetron sputtering at room temperature. Structural, optical, and electrical properties of these multilayers were investigated before and after electro-annealing. Measurement results revealed that improved optical transmittance and sheet resistance can be obtained by the optimization of Ag thickness for the as-grown ITO/Ag/ITO layers. The highest figure of merit (FoM) value of 17.37 × 10−3 Ω−1 with optical transmittance of 85.15% in the visible region and sheet resistance of 11.54 Ω/□ was obtained for the Ag thickness of 16.5 nm for as-grown samples. The electro-annealing of as-grown ITO/Ag/ITO multilayers led to improved optical behavior of the multilayer structure over a wide spectral range, especially in the near-infrared range. Electro-annealing also provided an improvement in the crystallinity and sheet resistance of the electrodes. The improvement of the electrical and optical properties of the structure enabled a FoM of 23.07 × 10−3 Ω−1 with the optical transmittance of 86.80% in the visible region and sheet resistance of 10.52 Ω/□. The findings of this work provide proper knowledge of the properties of ITO/Ag/ITO multilayers under electrical current and suggest that the overall performance of the multilayers can be improved by the electro-annealing process.Article Citation - WoS: 3Citation - Scopus: 3Compact Multilayer Thin-Film Color Filters and Direct Integration on White-Light Diodes for Color Conversion(Optical Society of America, 2021) Yiğen, Serap; Ekmekçioğlu, Merve; Özdemir, Mehtap; Aygün, Gülnur; Özyüzer, LütfiWe present highly efficient green, yellow, and red filters based on a metal-dielectric structure. The filters encompass only five layers of alternating zinc tin oxide and silver thin films that are grown on soda lime glass and white light-emitting diodes (LEDs) using direct current magnetron sputtering at room temperature. The designed filters provide efficient color filtering in the visible spectrum. High purity colored light is obtained by direct application of filters on LEDs as color converters. The presented method offers an easy way for realizing different colors by tuning the thicknesses of layers in the structure. (C) 2021 Optical Society of AmericaArticle Citation - WoS: 6Citation - Scopus: 7Thermally and Optically Tunable Sub-Terahertz Superconducting Fishnet Metamaterial(Elsevier Ltd., 2018) Sabah, Cumali; Mulla, Batuhan; Altan, Hakan; Özyüzer, LütfiIn this paper, a novel fishnet metamaterial structure is designed and analyzed under different material combinations and under different active controlling techniques. The results indicate that, the proposed fishnet metamaterial has a single resonance with double negativity at 0.39 THz when quartz substrate and aluminum is utilized in the design. Moreover, when the metallic parts are replaced with YBCO, the proposed design also exhibits double negativity with a stronger resonance and can be used as a switch between the double negative and single negative modes if the temperature is altered. In addition to these, when substrate (quartz) is replaced with MgO, the resonance shifts from 0.39 THz to 0.26 THz and shows double negativity. Moreover, switching properties under illumination can also be obtained when the silicon is utilized in the design (MgO-YBCO combination). According to these results, it is found that, in the case that the conductivity of silicon exceeds a certain value, the character of the resonance changes from double negative to the single negative mode.Article Citation - WoS: 35Citation - Scopus: 38Influence of Sulfurization Temperature on Cu2znsns4 Absorber Layer on Flexible Titanium Substrates for Thin Film Solar Cells(IOP Publishing Ltd., 2018) Buldu, Dilara Gökçen; Cantaş, Ayten; Türkoğlu, Fulya; Akça, Fatime Gülşah; Meriç, Ece; Özdemir, Mehtap; Tarhan, Enver; Özyüzer, Lütfi; Aygün, GülnurIn this study, the effect of sulfurization temperature on the morphology, composition and structure of Cu2ZnSnS4 (CZTS) thin films grown on titanium (Ti) substrates has been investigated. Since Ti foils are flexible, they were preferred as a substrate. As a result of their flexibility, they allow large area manufacturing and roll-to-roll processes. To understand the effects of sulfurization temperature on the CZTS formation on Ti foils, CZTS films fabricated with various sulfurization temperatures were investigated with several analyses including x-ray diffraction (XRD), scanning electron microscopy (SEM), x-ray photoelectron spectroscopy and Raman scattering. XRD measurements showed a sharp and intense peak coming from the (112) planes of the kesterite type lattice structure (KS), which is strong evidence for good crystallinity. The surface morphologies of our thin films were investigated using SEM. Electron dispersive spectroscopy was also used for the compositional analysis of the thin films. According to these analysis, it is observed that Ti foils were suitable as substrates for the growth of CZTS thin films with desired properties and the sulfurization temperature plays a crucial role for producing good quality CZTS thin films on Ti foil substrates.Article Citation - WoS: 2Citation - Scopus: 3Comparision of in Situ Spectroscopic Ellipsometer and Ex Situ X-Ray Photoelectron Spectroscopy Depth Profiling Analysis of Hfo2/Hf Multilayer Structure(IOP Publishing Ltd., 2018) Cantaş, Ayten; Özyüzer, Lütfi; Aygün, GülnurA HfO2 film was grown by RF magnetron sputtering technique on a Si substrate Using in situ Spectroscopic Ellipsometry (SE), the film thickness and refractive index were examined as a function of deposition time. Ex situ x-ray Photoelectron Spectroscopy (XPS) was used in depth profile mode to determine the phase evolution of HfO2/Hf/Si multilayer structure after the growth process. The chemical composition and the crystal structure of the film were investigated by Fourier Transform Infrared (FTIR) spectroscopic measurements and x-ray Diffraction in Grazing Incidence (GI-XRD) mode, respectively. The results showed that the film was grown in the form of HfO2 film. According to SE analysis, reactive deposition of HfO2 directly on Hf/Si results to SiO2 interface of about 2 nm. The final HfO2 films thickness is 5.4 nm. After a certain period of time, the XPS depth profile revealed that the film was in the form of Hf-rich Hf silicate with SiO2 interfacial layer. In reference to XPS quantification analysis from top to bottom of film, the atomic concentration of Hf element reduces from 19.35% to 7.13%, whereas Si concentration increases from 22.99% to 74.89%. The phase change of HfO2 film with time is discussed in details.Article Citation - WoS: 21Citation - Scopus: 22Investigation of Electron Beam Lithography Effects on Metal-Insulator Transition Behavior of Vanadium Dioxide(IOP Publishing Ltd., 2017) Yüce, Hürriyet; Alaboz, Hakan; Demirhan, Yasemin; Özdemir, M.; Özyüzer, Lütfi; Aygün, GülnurVanadium dioxide (VO2) shows metal-insulator phase transition at nearly 68 °C. This metal-insulator transition (MIT) in VO2 leads to a significant change in near-infrared transmittance and an abrupt change in the resistivity of VO2. Due to these characteristics, VO2 plays an important role on optic and electronic devices, such as thermochromic windows, meta-materials with tunable frequency, uncooled bolometers and switching devices. In this work, VO2 thin films were fabricated by reactive direct current magnetron sputtering in O2/Ar atmosphere on sapphire substrates without any further post annealing processes. The effect of sputtering parameters on optical characteristics and structural properties of grown thin films was investigated by SEM, XRD, Raman and UV/VIS spectrophotometer measurements. Patterning process of VO2 thin films was realized by e-beam lithography technique to monitor the temperature dependent electrical characterization. Electrical properties of VO2 samples were characterized using microprobe station in a vacuum system. MIT with hysteresis behavior was observed for the unpatterned square samples at around 68 °C. By four orders of magnitude of resistivity change was measured for the deposited VO2 thin films at transition temperature. After e-beam lithography process, substantial results in patterned VO2 thin films were observed. In this stage, for patterned VO2 thin films as stripes, the change in resistivity of VO2 was reduced by a factor of 10. As a consequence of electrical resistivity measurements, MIT temperature was shifted from 68 °C to 50 °C. The influence of e-beam process on the properties of VO2 thin films and the mechanism of the effects are discussed. The presented results contribute to the achievement of VO2 based thermochromic windows and bolometer applications.Article Citation - WoS: 12Citation - Scopus: 13Emission of the Thz Waves From Large Area Mesas of Superconducting Bi 2sr2cacu2o8+? by the Injection of Spin Polarized Current(Elsevier Ltd., 2013) Türkoğlu, Fulya; Özyüzer, Lütfi; Köseoğlu, Hasan; Demirhan, Yasemin; Preu, S.; Malzer, S.; Şimşek, Yılmaz; Wang, Huabing; Muller, P.Rectangular Au/Co/Au/Bi2Sr2CaCu2O 8+δ (Bi2212) mesa structures with large areas and high thicknesses were fabricated on as-grown Bi2212 single crystals in order to obtain small critical current from as-grown mesas by the injection of spin polarized current and so eliminate the adjustment of doping level for successful THz emission. We have performed c-axis resistance versus temperature (R-T), current-voltage (I-V) characteristics and bolometer measurements. It is the first time that THz emission has been observed from as-grown mesas due to injection of spin polarized current. © 2013 Elsevier Ltd. All rights reserved.Conference Object Citation - WoS: 36Citation - Scopus: 40Thermal Management in Large Bi2212 Mesas Used for Terahertz Sources(Institute of Electrical and Electronics Engineers Inc., 2009) Kurter, Cihan; Gray, Kenneth E.; Zasadzinski, John F.; Özyüzer, Lütfi; Koshelev, A. E.; Li, Q.; Yamamoto, T.; Kadowaki, K.; Kwok, W. K.; Tachiki, M.; Welp, U.We present a thermal analysis of a patterned mesa on a Bi 2Sr2CaCu2O8 (Bi2212) single crystal that is based on tunneling characteristics of the c-axis stack of ∼800 intrinsic Josephson junctions in the mesa. Despite the large mesa volume (e.g., 40 × 300 × 1.2 μm3) and power dissipation that result in self-heating and backbending of the current-voltage curve (I-V), there are accessible bias conditions for which significant polarized THz-wave emission can be observed. We estimate the mesa temperature by equating the quasiparticle resistance, Rqp(T), to the ratio V/I over the entire I-V including the backbending region. These temperatures are used to predict the unpolarized black-body radiation reaching our bolometer and there is substantial agreement over the entire I-V. As such, backbending results from the particular R qp (T) for Bi2212, as first discussed by Fenton, rather than a significant suppression of the energy gap. This model also correctly predicts the observed disappearance of backbending above ∼60 K.
- «
- 1 (current)
- 2
- 3
- »