Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
6 results
Search Results
Article Citation - WoS: 64Citation - Scopus: 78Utilization of Municipal Plastic and Wood Waste in Industrial Manufacturing of Wood Plastic Composites(Springer Verlag, 2020) Başalp, Dildare; Tıhmınlıoğlu, Funda; Sofuoğlu, Aysun; İnal, Fikret; Sofuoğlu, Aysun; Tıhmınlıoğlu, Funda; İnal, Fikret; Sofuoğlu, Sait Cemil; 03.02. Department of Chemical Engineering; 03.07. Department of Environmental Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyIn this study, Wood Plastic Composites (WPCs) were produced from post-consumer bulky wastes of recycled plastic and wood in order to minimize waste, decrease environmental effects of plastics, reserve natural resources, and support circular economy for sustainable production and consumption. Five different types of polypropylene (PP) or polyethylene (PE) based recycled plastics and wood obtained from urban household bulky wastes were used in the production of recycled WPC composites, r-WPCs. Virgin WPC (v-WPC) and r-WPC compounds were prepared with wood flour (WF) and maleic anhydride grafted compatibilizer (MAPP or MAPE) to evaluate the effect of recycled polymer type and compatibilizer on the mechanical properties. It was found that tensile strength properties of r-WPCs produced from recycled PP (r-PP) were higher than that of the r-WPCs produced from mixed polyolefins and recycled PE. r-WPCs containing anti-oxidants, UV stabilizers, and compatibilizer with different WF compositions were produced from only recycled garden fraction PP (PPFGF) to determine the optimum composition and processing temperature for pilot scale manufacturing of r-WPCs. Based on tensile, impact, flexural, and water sorption properties of r-WPC compounds with different formulations, the optimum conditions of r-WPC compounds for industrial manufacturing process were determined. Surface morphology of fractured surfaces as well as tensile, flexural and density results of r-WPC compounds revealed the enhancement effect of MAPP on interfacial adhesion in r-WPCs. r-WPC products (crates and table/chair legs) based on bulky wastes were produced using an injection molding process at industrial scale by using 30 wt% WF-filled r-WPC compound. This study demonstrated that r-WPC compounds from recycled bulky plastic and wood wastes can be used as a potential raw material in plastic as well as WPC industry, contributing to circular economy. GraphicArticle Citation - WoS: 22Citation - Scopus: 25Indoor Air Quality in a Restaurant Kitchen Using Margarine for Deep-Frying(Springer Verlag, 2015) Sofuoğlu, Sait Cemil; Toprak, Melis; Toprak, Melis; Çimrin, Arif H.; Sofuoğlu, Sait Cemil; İnal, Fikret; 01. Izmir Institute of Technology; 03.07. Department of Environmental Engineering; 03.02. Department of Chemical Engineering; 03. Faculty of EngineeringIndoor air quality has a great impact on human health. Cooking, in particular frying, is one of the most important sources of indoor air pollution. Indoor air CO, CO2, particulate matter (PM), and volatile organic compound (VOC) concentrations, including aldehydes, were measured in the kitchen of a small establishment where a special deep-frying margarine was used. The objective was to assess occupational exposure concentrations for cooks of such restaurants. While individual VOC and PM2.5 concentrations were measured before, during, and after frying events using active sampling, TVOC, PM10, CO, CO2, temperature, and relative humidity were continuously monitored through the whole period. VOC and aldehyde concentrations did not increase to considerable levels with deep-frying compared to the background and public indoor environment levels, whereas PM10 increased significantly (1.85 to 6.6 folds). The average PM2.5 concentration of the whole period ranged between 76 and 249 μg/m3. Hence, considerable PM exposures could occur during deep-frying with the special margarine, which might be sufficiently high to cause health effects on cooks considering their chronic occupational exposures.Article Citation - WoS: 163An Assessment of Indoor Air Concentrations and Health Risks of Volatile Organic Compounds in Three Primary Schools(Elsevier Ltd., 2011) İnal, Fikret; Aslan, Güler; İnal, Fikret; Sofuoğlu, Aysun; Sofuoğlu, Sait Cemil; 03.02. Department of Chemical Engineering; 03.07. Department of Environmental Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyConcentrations of volatile organic compounds (VOCs), including formaldehyde, in classrooms, kindergartens, and outdoor playgrounds of three primary schools were measured in spring, winter, and fall terms in Izmir, Turkey. A health-risk assessment was conducted for odor detection, sensory irritation, chronic toxic effects, and cancer. Active sampling was applied for VOCs and formaldehyde on Tenax TA and DNPH tubes, respectively. VOCs were analyzed in a thermal desorption-GC-MS system. Formaldehyde analysis was performed using an HPLC instrument. Benzene, toluene, and formaldehyde were the most abundant compounds with 95th percentile indoor air concentrations of 29, 87, and 106μg/m3, respectively. Naphthalene and xylenes followed them with an order of magnitude lower concentrations. Two isomers of dichlorobenzene (1,3 and 1,4) were the other notable compounds. The concentrations were utilized to classify the indoor air pollutants with respect to potential health effects. In addition, carcinogenic and chronic toxic risks were estimated using Monte-Carlo simulation. Formaldehyde appears to be the most concerning pollutant with high chronic toxic and carcinogenic risk levels according to the health assessment followed by naphthalene, benzene, and toluene due to their chronic effects.Article Citation - WoS: 21Citation - Scopus: 23Activated Carbon Adsorption of Fuel Oxygenates Mtbe and Etbe From Water(Springer Verlag, 2009) İnal, Fikret; Yetgin, Senem; İnal, Fikret; Şimşek, Selvi; Sofuoğlu, Aysun; Sofuoğlu, Sait Cemil; Sofuoğlu, Aysun; 03.02. Department of Chemical Engineering; 03.07. Department of Environmental Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyThe aqueous phase adsorption of fuel oxygenates methyl tertiary butyl ether (MTBE) and ethyl tertiary butyl ether (ETBE) onto commercially available granular activated carbon (GAC; Norit GAC 1240) was investigated in a batch system at 27°C. The oxygenate concentrations were determined by headspace gas chromatography/mass spectrometry analyses. The experimental data were used with four two-parameter isotherm models (Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich) and two kinetic models (pseudo first-order and pseudo second-order) to determine equilibrium and kinetic parameters. Considering the correlation coefficient and root mean square error, Dubinin-Radushkevich isotherm showed better fit with the equilibrium data for MTBE. However, the performances of Langmuir and Dubinin-Radushkevich models were comparable for ETBE. The adsorption capacities were calculated as 5.50 and 6.92 mg/g for MTBE and ETBE, respectively, at an equilibrium solution concentration of 1 mg/L using Dubinin-Radushkevich isotherm. The differences between the model predictions and experimental data were similar for the pseudo first-order and pseudo second-order kinetic models. Gibbs free-energy changes of adsorption were found to be -22.59 and -28.55 kJ/mol for MTBE-GAC and ETBE-GAC systems, respectively, under the experimental conditions studied.Article Citation - WoS: 74Citation - Scopus: 89Seasonal Variation in Drinking Water Concentrations of Disinfection By-Products in Izmir and Associated Human Health Risks(Elsevier Ltd., 2008) Baytak, Derya; Sofuoğlu, Aysun; Sofuoğlu, Aysun; Sofuoğlu, Sait Cemil; İnal, Fikret; Sofuoğlu, Sait Cemil; 03.02. Department of Chemical Engineering; 03.07. Department of Environmental Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologySeasonal variation in concentrations of two different disinfection by-product groups, trihalomethanes (THMs) and haloacetonitriles (HANs), was investigated in tap water samples collected from five sampling points (one groundwater and four surface water sources) in İzmir, Turkey. Estimates of previously published carcinogenic and non-carcinogenic risks through oral exposure to THMs were re-evaluated using a probabilistic approach that took the seasonal concentration variation into account. Chloroform, bromoform, dibromochloromethane and dichloroacetonitrile were the most frequently detected compounds. Among these, chloroform was detected with the highest concentrations ranging from 0.03 to 98.4 μg/L. In tap water, at the groundwater supplied sampling point, brominated species, bromoform and dibromoacetonitrile, were detected at the highest levels most probably due to bromide ion intrusion from seawater. The highest total THM and total HAN concentrations were detected in spring while the lowest in summer and fall. The annual average total THM concentration measured at one of the surface water supplied sampling points exceeded the USEPA's limit of 80 μg/L. While all non-carcinogenic risks due to exposure to THMs in İzmir drinking water were negligible, carcinogenic risk levels associated with bromodichloromethane and dibromochloromethane were higher than one in million.Article Citation - WoS: 42Citation - Scopus: 50Occurrence, Oral Exposure and Risk Assessment of Volatile Organic Compounds in Drinking Water for Izmir(Elsevier Ltd., 2006) Kavcar, Pınar; Odabaşı, Mustafa; Sofuoğlu, Sait Cemil; İnal, Fikret; Sofuoğlu, Sait Cemil; 03.07. Department of Environmental Engineering; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyConcentrations of volatile organic compounds (VOCs) were measured in the drinking water in Province of İzmir, Turkey, and associated health risks due to ingestion of these compounds were investigated using population weighted random samples. A total of 100 houses were visited in different districts of İzmir and drinking water samples were collected from consumers' drinking water source. Questionnaires were administered to one participant in each house to determine demographics and drinking water consumption rates. Oral exposure and risks were estimated for each participant and İzmir population by deterministic and probabilistic approaches, respectively. The four trihalomethane (THM) species (i.e., chloroform, bromodichloromethane, dibromochloromethane, and bromoform), benzene, toluene, p-xylene, and naphthalene were the most frequently detected VOCs with concentrations ranging from below detection limit to 35 μg/l. The risk estimates were found to be less than the values reported in the literature with few exceptions. Noncarcinogenic risks attributable to ingestion of VOCs for İzmir population were negligible, whereas the mean carcinogenic risk estimates for bromodichloromethane and dibromochloromethane were above the de minimis level of one in a million (10-6). For all VOCs, the concentrations measured in metropolitan area were greater than those in other districts. All THM species were detected in higher concentrations in tap water, whereas nontap water contained more benzene, toluene, p-xylene, and naphthalene. Therefore, the concentrations of the latter four compounds and associated risks increased with increasing income and education level since bottled water was used in larger proportions within these subgroups. The results of this study showed that oral exposure to drinking water contaminants and associated risks may be higher than the acceptable levels even if the concentrations fall below the standards.