Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
4 results
Search Results
Article Citation - WoS: 1Citation - Scopus: 2A New-Generation Poly (ether Imide Sulfone) Based Solvent Resistant Ultrafiltration Membrane for a Sustainable Production of Silica Nanopowder(Elsevier, 2023) Güngörmüş, Elif; Alsoy Altınkaya, SacideThe work presented here demonstrated the feasibility of using a membrane to improve the sustainability of silica nanopowder production. Due to superior chemical resistance, high thermal-oxidative stability, and good processability, poly (ether imide sulfone) has been used for membrane production and modified with amine-functionalized TiO2 nanoparticles. The membrane demonstrated good long-term leaching stability in 40% ethanol and silica synthesis solution and maintained its permeability and rejection characteristics under static and dynamic conditions. Additionally, the high antifouling property of the membrane allowed recovering 99.5% of the nanoparticles. Backwashing with water resulted in a high flux recovery ratio (>93%), and gravity-settling without energy can easily separate silica nanoparticles and water in the backwashing solution. Compared to classical freeze-drying and oven-drying methods, integrating membrane into silica nanopowder production can reduce energy consumption by a factor of 81 and 53. At the same time, the utility cost can be saved by 80% and 69%. Additionally, the solvent and catalyst recovered in the permeate stream can be reused in the synthesis, reducing disposal and purchasing costs. In conclusion, membrane-assisted nanopowder production can minimize the adverse effects caused by commonly used conventional drying methods and make the process more sustainable and environmentally friendly.Article Citation - WoS: 16Citation - Scopus: 16A High-Performance Acid-Resistant Polyaniline Based Ultrafiltration Membrane: Application in the Production of Aluminium Sulfate Powder From Alumina Sol(Elsevier, 2020) Güngörmüş, Elif; Alsoy Altınkaya, SacideIn this work, we report a new class of acid-resistant ultrafiltration membrane fabricated from polyaniline (PANI) based on its self-acid doping ability. The doped membrane was prepared by filtering the H2SO4 solution (pH = 0.55) through the PANI membrane at 2 bar. To critically assess the acid resistance, the resulting doped membrane was stored in H2SO4 solution (pH = 0.55) for one month. The chemical structure and separation performance of the membrane was not adversely affected by acid exposure. The membrane was also tested in realistic conditions through filtration of alumina sol synthesized in an extremely acidic H2SO4 solution. The results have shown that 99% recovery of the aluminium sulfate particles is possible with the doped PANI membrane as a result of the hydrophilic, relatively smooth, and antifouling surface created by acid doping. The membrane filtration did not change the size and size distribution of the particles in the sol. After filtration, concentrated particles were converted into powder form in 24 h at room temperature without using a dryer. The method proposed in this study is easy and robust and can be used to develop acid-resistant UF membranes not only for concentrating the alumina sol but also for recovering valuable compounds from acid-containing feeds.Article Citation - WoS: 12Citation - Scopus: 13Development of Agcl-Tio2 Xerogels Entrapped Antibacterial Polyacrylonitrile Membranes: the Effect of High Salinity Water on Silver Release, Antibiofouling and Antibacterial Efficacies(Elsevier Ltd., 2020) Uz, Metin; Yaşar Mahlıçlı, Filiz; Şeker, Erol; Alsoy Altınkaya, SacideSilver-containing antibacterial membranes are commonly used to control biofouling during bacteria filtration. Unfortunately, fast and uncontrolled release of silver to water is a challenge since this causes mass accumulation of silver in water resources and insufficient long-term antimicrobial effect. To overcome these disadvantages, we propose to add AgCl-TiO2 xerogels (0–0.8 wt%) in the polyacrylonitrile membranes. The long-term silver retaining of the membranes was evaluated by measuring the silver release under filtration of deionized water in the absence and the presence of 1 M NaCl up to 5 days. The antibiofouling and the antibacterial efficacies were determined by measuring the changes in antibacterial activity and DI water flux of the membranes at the end of 5 days of E. coli filtration. The 0.2 wt% AgCl-TiO2 xerogel incorporated polyacrylonitrile membrane demonstrated a constant ~1 ?g of silver release/cm2 per filtration cycle after a total filtration of 0.05 L/cm2 with 1 M NaCl solution. Additionally, it showed antibacterial efficacy and ~100% recovery of deionized water flux by simple backwashing with water after having been used in many E. coli filtration cycles. Thus, this membrane could potentially be used up to ~5.8 years for 8000 h a year for the filtration of high salinity water. Statement of novelty: Silver-containing antibacterial membranes are commonly used to control biofouling during bacteria filtration. Uncontrolled release of silver from the membrane causes massive silver accumulation in water which in turn leads to contamination of water resources and threat to aquatic organisms. Although silver release is strongly influenced by the salinity of water, the release data was collected through filtration of pure DI water or tap water in literature. To overcome the shortcomings of the published studies, we propose to use AgCl-TiO2 xerogels in membranes due to low solubility of AgCl in water and measure the release by filtering high-salinity water. © 2020 Elsevier B.V.Article Citation - WoS: 39Citation - Scopus: 44Layer-By Surface Modification of Polyethersulfone Membranes Using Polyelectrolytes and Agcl/Tio2 Xerogels(Elsevier Ltd., 2015) Kaner, Papatya; Johnson, Daniel J.; Şeker, Erol; Hilal, Nidal; Alsoy Altınkaya, SacideIn this study, the layer-by-layer (LbL) assembly method was employed to modify a commercial polyethersulfone (PES) membrane by successive adsorption of chitosan and alginate as cationic and anionic polyelectrolytes. To enhance anti-biofouling property, pure, PEG mixed and PEGylated AgCl/TiO2 xerogels were incorporated solely in the top layer of the LbL-modified membranes. Organic and biological foulings were addressed separately using alginate and Escherichia coli bacteria suspensions as the organic and biological model foulants, respectively. LbL-modifying the commercial PES membrane successively with chitosan and alginate polyelectrolyte multilayers prevented organic fouling extensively. In addition, we found that AgCl/TiO2-incorporated membranes show higher water permeability and improved resistance to biological fouling as compared to the PES membrane. Silver amounts in consecutively collected permeate samples were quantified by ICP-MS analysis to assess the stability of AgCl/TiO2-incorporated layers. Silver loss per filtration cycle followed an increasing trend initially, up to a filtration volume totaling 3000L/m2, leading to 4.2% reduction in the immobilized silver amount. After that, silver loss per filtration cycle stabilized at ~7.44μg/L, which extrapolates to ~265 days time-span for the remaining silver to be released at a filtration rate of ~1000L/m2 h. Antibacterial activity tests showed that AgCl/TiO2-incorporated layers do not permit bacterial growth on the membrane surface.