Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
4 results
Search Results
Article Citation - WoS: 35Citation - Scopus: 38Influence of Sulfurization Temperature on Cu2znsns4 Absorber Layer on Flexible Titanium Substrates for Thin Film Solar Cells(IOP Publishing Ltd., 2018) Buldu, Dilara Gökçen; Cantaş, Ayten; Özyüzer, Lütfi; Akça, Fatime Gülşah; Meriç, Ece; Tarhan, Enver; Tarhan, Enver; Özyüzer, Lütfi; Aygün, Gülnur; Özdemir, Mehtap; Tarhan, Enver; 04.05. Department of Pyhsics; 04. Faculty of Science; 01. Izmir Institute of TechnologyIn this study, the effect of sulfurization temperature on the morphology, composition and structure of Cu2ZnSnS4 (CZTS) thin films grown on titanium (Ti) substrates has been investigated. Since Ti foils are flexible, they were preferred as a substrate. As a result of their flexibility, they allow large area manufacturing and roll-to-roll processes. To understand the effects of sulfurization temperature on the CZTS formation on Ti foils, CZTS films fabricated with various sulfurization temperatures were investigated with several analyses including x-ray diffraction (XRD), scanning electron microscopy (SEM), x-ray photoelectron spectroscopy and Raman scattering. XRD measurements showed a sharp and intense peak coming from the (112) planes of the kesterite type lattice structure (KS), which is strong evidence for good crystallinity. The surface morphologies of our thin films were investigated using SEM. Electron dispersive spectroscopy was also used for the compositional analysis of the thin films. According to these analysis, it is observed that Ti foils were suitable as substrates for the growth of CZTS thin films with desired properties and the sulfurization temperature plays a crucial role for producing good quality CZTS thin films on Ti foil substrates.Article Citation - WoS: 2Citation - Scopus: 3Comparision of in Situ Spectroscopic Ellipsometer and Ex Situ X-Ray Photoelectron Spectroscopy Depth Profiling Analysis of Hfo2/Hf Multilayer Structure(IOP Publishing Ltd., 2018) Cantaş, Ayten; Aygün, Gülnur; Aygün, Gülnur; Özyüzer, Lütfi; 04.05. Department of Pyhsics; 04. Faculty of Science; 01. Izmir Institute of TechnologyA HfO2 film was grown by RF magnetron sputtering technique on a Si substrate Using in situ Spectroscopic Ellipsometry (SE), the film thickness and refractive index were examined as a function of deposition time. Ex situ x-ray Photoelectron Spectroscopy (XPS) was used in depth profile mode to determine the phase evolution of HfO2/Hf/Si multilayer structure after the growth process. The chemical composition and the crystal structure of the film were investigated by Fourier Transform Infrared (FTIR) spectroscopic measurements and x-ray Diffraction in Grazing Incidence (GI-XRD) mode, respectively. The results showed that the film was grown in the form of HfO2 film. According to SE analysis, reactive deposition of HfO2 directly on Hf/Si results to SiO2 interface of about 2 nm. The final HfO2 films thickness is 5.4 nm. After a certain period of time, the XPS depth profile revealed that the film was in the form of Hf-rich Hf silicate with SiO2 interfacial layer. In reference to XPS quantification analysis from top to bottom of film, the atomic concentration of Hf element reduces from 19.35% to 7.13%, whereas Si concentration increases from 22.99% to 74.89%. The phase change of HfO2 film with time is discussed in details.Article Citation - WoS: 21Citation - Scopus: 22Investigation of Electron Beam Lithography Effects on Metal-Insulator Transition Behavior of Vanadium Dioxide(IOP Publishing Ltd., 2017) Yüce, Hürriyet; Alaboz, Hakan; Aygün, Gülnur; Özdemir, M.; Özyüzer, Lütfi; Yüce, Hürriyet; Özdemir, Mehtap; Demirhan, Yasemin; Özyüzer, Lütfi; 04.05. Department of Pyhsics; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 04. Faculty of Science; 01. Izmir Institute of TechnologyVanadium dioxide (VO2) shows metal-insulator phase transition at nearly 68 °C. This metal-insulator transition (MIT) in VO2 leads to a significant change in near-infrared transmittance and an abrupt change in the resistivity of VO2. Due to these characteristics, VO2 plays an important role on optic and electronic devices, such as thermochromic windows, meta-materials with tunable frequency, uncooled bolometers and switching devices. In this work, VO2 thin films were fabricated by reactive direct current magnetron sputtering in O2/Ar atmosphere on sapphire substrates without any further post annealing processes. The effect of sputtering parameters on optical characteristics and structural properties of grown thin films was investigated by SEM, XRD, Raman and UV/VIS spectrophotometer measurements. Patterning process of VO2 thin films was realized by e-beam lithography technique to monitor the temperature dependent electrical characterization. Electrical properties of VO2 samples were characterized using microprobe station in a vacuum system. MIT with hysteresis behavior was observed for the unpatterned square samples at around 68 °C. By four orders of magnitude of resistivity change was measured for the deposited VO2 thin films at transition temperature. After e-beam lithography process, substantial results in patterned VO2 thin films were observed. In this stage, for patterned VO2 thin films as stripes, the change in resistivity of VO2 was reduced by a factor of 10. As a consequence of electrical resistivity measurements, MIT temperature was shifted from 68 °C to 50 °C. The influence of e-beam process on the properties of VO2 thin films and the mechanism of the effects are discussed. The presented results contribute to the achievement of VO2 based thermochromic windows and bolometer applications.Article Citation - WoS: 266Citation - Scopus: 292High Quality Ito Thin Films Grown by Dc and Rf Sputtering Without Oxygen(IOP Publishing Ltd., 2010) Tuna, Öcal; Özyüzer, Lütfi; Selamet, Yusuf; Selamet, Yusuf; Aygün, Gülnur; Aygün, Gülnur; Özyüzer, Lütfi; 04.05. Department of Pyhsics; 04. Faculty of Science; 01. Izmir Institute of TechnologyHigh quality indium tin oxide (ITO) thin films were grown without oxygen by both dc and RF magnetron sputtering techniques on glass substrates. The effects of substrate temperature, film thickness and sputtering method on the structural, electrical and optical properties of the as-grown films were investigated. The results showed that the substrate temperature had substantial effects on the film properties, in particular on the crystallization and resistivity. When the substrate temperature was increased to 150 °C, crystallization in the (2 2 2) plane started appearing for both dc and RF sputtered films. We additionally found that with further increments of substrate temperature, the preferred crystallization orientation changed differently for dc and RF sputtered films. Optical transmission in the visible region for a film thickness of 70 nm was found to be above 85%. The bandgap was calculated to be about 3.64 eV for the substrate temperature of 150 °C for a 70 nm thick film. The value of the bandgap increased with respect to the increment in film thickness as well as substrate temperature. We also measured the temperature dependence of the resistivity and Hall coefficient of the films, and calculated the carrier concentration and Hall mobility. Very low room temperature resistivities for dc and RF magnetron sputtered grown films of about 1.28 × 10-4 Ω cm and 1.29 × 10-4 Ω cm, respectively, were obtained. © 2010 IOP Publishing Ltd.