Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
4 results
Search Results
Article Citation - Scopus: 4One-step hydrothermal synthesis of spinel manganese oxide ion-sieve from commercial Γ-Mno2 and its uptake performance for lithium(Elsevier Ltd, 2024) Toprak, Seyra; Demir, Mustafa MuammerThe selective extraction of lithium from aqueous systems necessitates efficient sorbent materials. Spinel-type lithium manganese oxide ion sieves (LMOs) have been bee recognized for their high performance in this application. However, the elevated market cost of the spinel form (λ-MnO2) raises economic concerns, posing challenges to the feasibility of the extraction process. In this study, the one-step hydrothermal synthesis of Li1.33Mn1.67O4 was carried out at 200 °C for 7 days using commercial γ-MnO2 powder and aqueous LiOH solution as reactants. The synthesized powder exhibited characteristic XRD reflections consistent with spinel Li1.33Mn1.67O4. Lithium ion-sieve (H1.33Mn1.67O4) was obtained by leaching the LMO product with dilute hydrochloric acid solution. The sorption capacity of γ-MnO2 is increased from 8.4 to 23.1 mg/g (C0=200 mg/L), this capacity is very close to the one of the commercial λ-MnO2. The synthesized spinel HMO sorbent achieved a maximum Langmuir adsorption capacity of 52.1 mg/g. The extraction efficiency reached 94% at the sorbent dose of 20 g/L. The distribution coefficients of metal ions were in the order Li+ > Ca2+ > K+ > Na+, emphasizing selective Li+ extraction from brines with high Na+ content. These findings highlight the successful development of a spinel-type lithium manganese oxide ion sieve from γ-MnO2 polymorph, which is nearly an order of magnitude cheaper than the selective λ-MnO2. The study addresses critical issue of economic feasibility in lithium extraction processes, providing a potential solution for the selective recovery of bulk lithium. © 2024 Elsevier LtdArticle Citation - Scopus: 6Lithium Extraction From Geothermal Brine Using Γ-Mno2: a Case Study for Tuzla Geothermal Power Plant(Elsevier Ltd, 2024) Toprak, S.; Yılmaz, Selahattin; Öncel, Ç.; Baba, Alper; Yılmaz, S.; Demir, Mustafa Muammer; Baba, A.; Koç, G.A.; Demir, M.M.Geothermal brines contain high concentrations of ions and form a source of various valuable elements. The isolation of the elements from their water systems is a great challenge when the gradual depletion of ores in mining is considered. Attempts have been made for a long time to isolate valuable elements from aqueous mixtures prepared in the laboratory. However, those studies might not reflect the complexity of natural systems and might yield results that deviate significantly from the performance in real field systems. In this study, sorption is used to extract lithium ions from a representative field, Tuzla Geothermal Power Plant (TGPP) Turkey, using a mini-pilot reactor introduced to the reinjection well of the plant. Electrolytic manganese dioxide (γ-MnO2), a relatively inexpensive material widely used as the cathode material in lithium-ion batteries, was employed as a sorbent material for lithium. The sorption/desorption performance of the novel γ-MnO2 was investigated under various conditions. Sorption is performed at 360K and 2 bars. The maximum sorption performance was obtained at 1 h in Tuzla GPP. The desorption experiments were performed in acidic solutions. The concentration of Li+ in the desorption solution was found to be 25 mg/L on average when 10 g of γ-MnO2 was dispersed into 30 mL of the acidic aqueous solution. The first desorption solution was used consecutively for collecting more Li+ ions through the desorption of fresh brine-treated powder samples (cumulative desorption). By repeating this process four times consecutively, 230 mg/L of Li+ was obtained in the desorption solution. Moreover, the reusability of the γ-MnO2 sorbent was examined. The sorbent powder showed almost 40% performance efficiency compared to virgin powder under the conditions employed in this study. The use of electrolytic γ-MnO2 sorbent for lithium adsorption was found to be a promising process for practical use in the separation of lithium from geothermal brines. © 2024Book Part Citation - Scopus: 5Turmeric Starch: Structure, Functionality, and Applications(Elsevier, 2023) Rasmi, Y.; Demir, Mustafa Muammer; Kırboğa, K.K.; Tekin, B.; Demir, M.For many years, starch has been a subject of never-ending study. It is a relatively affordable substance widely used in food and non-food applications. Fresh rhizomes of Curcuma longa L. and Curcuma caesia extract turmeric starch (Zingiberaceae). Turmeric starch is a common food ingredient used in the thickening of soups and making syrups and other sugars. It is easily modified and finds many uses in industries such as adhesives, paper products, anti-sticking agents, and textile manufacturing. Morphological characteristics such as the shape and size of starch granules vary significantly, and further studies are expected for Turmeric starch, with promising results and increasing the usefulness of starches in industries. This book chapter outlines recent developments in understanding starch isolation, chemical composition, morphology, pasting, rheological and thermal characteristics, and various applications of turmeric starch. Potential applications of oat starches are also reviewed. © 2024 Elsevier Inc. All rights reserved.Article Citation - WoS: 18Citation - Scopus: 46Phosphor-Based White Led by Various Glassy Particles:control Over Luminous Efficiency(The Optical Society, 2019) Yüce, Hürriyet; Güner, Tuğrul; Balcı, Sinan; Demir, Mustafa MuammerGenerating white light through a mainstream remote phosphor design suffers from phosphor conversion efficiency loss due to a backscattering of light. Such a loss also reduces luminous efficiency of the resulting white light. To overcome this issue, various glassy scatterers with different morphologies such as glass bubbles, glass beads, and nanosized silica particles were employed as scatterers, together with a fixed amount of yellow phosphor (YAG:Ce3+) and a poly(dimethylsiloxane) (PDMS) matrix. In addition, the simulation of the system validates the rigorous multiple scattering of the incoming light most probably due to refractive index mismatch between the glass bubbles and surrounding PDMS matrix along with the internal reflections. (C) 2019 Optical Society of America