Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
5 results
Search Results
Article Citation - WoS: 2Citation - Scopus: 3Unlocking the Biological Potential of Emulsion-Templated Matrices Through Surface Engineering for Biomedical Applications(Elsevier Sci Ltd, 2025) Sert, Emircan; Ozmen, Ece; Owen, Robert; Dikici, Betul AldemirEmulsion templating is a highly advantageous route for the fabrication of porous materials, enabling the development of matrices with high porosity, high interconnectivity, and precise morphological control. Synthetic polymers are most widely used in the fabrication of emulsion-templated tissue engineering scaffolds due to their superior mechanical strength, ease of fabrication, control over polymer properties, and batch-to-batch stability. The biological response is strongly associated with the surface properties of the biomaterials; however, scaffolds constructed from synthetic polymers often lack cell recognition sites and exhibit limited bioactivity. Thus, synthetic polymer-based porous matrices commonly require surface post-modification to improve cell adhesion, proliferation, migration, gene expression, and differentiation processes. To date, extensive work has been carried out investigating surface modification of scaffolds fabricated via traditional scaffold fabrication techniques. Still, studies addressing the post-modification of emulsion-templated matrices are comparatively limited despite an exponential increase in the number of publications on emulsion templating for tissue engineering in recent years. This review will first examine the fundamentals of emulsion templating, then describe cell adhesion and the characteristics of scaffolds that influence cell-material interactions. It will then provide a comprehensive analysis of surface modification techniques and recent advancements in surface-modified emulsion-templated matrices for tissue engineering applications. Finally, we address the challenges and future directions in this rapidly evolving field. We anticipate that this comprehensive literature review will present the current state-of-the-art and serve as a valuable roadmap for researchers seeking to enhance the biological performance of their emulsion-templated scaffolds through surface modifications. Such scaffold optimisation strategies not only improve cell-material interactions but also hold translational potential for advancing human healthcare through more effective regenerative therapies.Article Citation - WoS: 4Citation - Scopus: 4Surface Modification Via Alkali Treatment and Its Effect on the Physicochemical and Biological Properties of Emulsion Templated Scaffolds(Elsevier Sci Ltd, 2025) Kocagoz, Mehmet; Tihminlioglu, Funda; Dikici, Betul AldemirEmulsion templating is an advantageous scaffold fabrication technique that provides high interconnectivity, high porosity, and control of the scaffold architecture. Polymerised emulsions with an internal phase ratio greater than 74 % are named Polymerised High Internal Phase Emulsions (PolyHIPEs). Polycaprolactone (PCL) is a synthetic, biodegradable, and biocompatible polymer widely used in tissue engineering, but the material-cell interaction of PCL-based biomaterials has been found to be limited due to the material's high hydrophobicity. This study aims to develop emulsion-templated polycaprolactone tetramethacrylate (4PCLMA)-based scaffolds and improve their biological performance using an alkaline surface modification method. For this purpose, 4PCLMA was successfully synthesised, and highly porous scaffolds were developed. PolyHIPEs were incubated in three different sodium hydroxide (NaOH) concentrations for three different incubation times. Chemical, morphological, mechanical characterisation, mass loss, water absorption capacity, water contact angle, Brunauer-Emmett-Teller analyses and biological investigations were conducted on NaOH-treated scaffolds in comparison with the control. The chemical changes induced by NaOH treatment in PolyHIPEs were confirmed by Fourier-transform infrared spectroscopy. NaOH treatment increased the water absorption capacity, hydrophilicity, surface area, and protein adsorption but decreased the weight and mechanical strength of the scaffolds. In vitro results showed that NaOH treatment did not cause cytotoxicity in L929 cells and positively affected the cell adhesion and proliferation behaviour of Saos-2 cells. This study suggests surface modification of biodegradable synthetic polymer-based PolyHIPEs by NaOH treatment as a simple, scalable and cost-effective approach to enhance cell-material interactions of the material without causing a significant change in the overall morphology, contributing to the advancement of next-generation healthcare technologies.Article Citation - WoS: 11Citation - Scopus: 11Quantitative Evaluation of the Pore and Window Sizes of Tissue Engineering Scaffolds on Scanning Electron Microscope Images Using Deep Learning(Amer Chemical Soc, 2024) Karaca, Ilayda; Dikici, Betul AldemirThe morphological characteristics of tissue engineering scaffolds, such as pore and window diameters, are crucial, as they directly impact cell-material interactions, attachment, spreading, infiltration of the cells, degradation rate and the mechanical properties of the scaffolds. Scanning electron microscopy (SEM) is one of the most commonly used techniques for characterizing the microarchitecture of tissue engineering scaffolds due to its advantages, such as being easily accessible and having a short examination time. However, SEM images provide qualitative data that need to be manually measured using software such as ImageJ to quantify the morphological features of the scaffolds. As it is not practical to measure each pore/window in the SEM images as it requires extensive time and effort, only the number of pores/windows is measured and assumed to represent the whole sample, which may cause user bias. Additionally, depending on the number of samples and groups, a study may require measuring thousands of samples and the human error rate may increase. To overcome such problems, in this study, a deep learning model (Pore D2) was developed to quantify the morphological features (such as the pore size and window size) of the open-porous scaffolds automatically for the first time. The developed algorithm was tested on emulsion-templated scaffolds fabricated under different fabrication conditions, such as changing mixing speed, temperature, and surfactant concentration, which resulted in scaffolds with various morphologies. Along with the developed model, blind manual measurements were taken, and the results showed that the developed tool is capable of quantifying pore and window sizes with a high accuracy. Quantifying the morphological features of scaffolds fabricated under different circumstances and controlling these features enable us to engineer tissue engineering scaffolds precisely for specific applications. Pore D2, an open-source software, is available for everyone at the following link: https://github.com/ilaydakaraca/PoreD2.Review Citation - WoS: 17Citation - Scopus: 16Engineering Periodontal Tissue Interfaces Using Multiphasic Scaffolds and Membranes for Guided Bone and Tissue Regeneration(Elsevier, 2024) Özkendir, Özge; Karaca, İlayda; Çullu, Selin; Yaşar, Hüsniye Nur,; Erdoğan, Oğulcan; Dikici, Serkan; Dikici, Betul AldemirPeriodontal diseases are one of the greatest healthcare burdens worldwide. The periodontal tissue compartment is an anatomical tissue interface formed from the periodontal ligament, gingiva, cementum, and bone. This multifaceted composition makes tissue engineering strategies challenging to develop due to the interface of hard and soft tissues requiring multiphase scaffolds to recreate the native tissue architecture. Multilayer constructs can better mimic tissue interfaces due to the individually tuneable layers. They have different characteristics in each layer, with modulation of mechanical properties, material type, porosity, pore size, morphology, degradation properties, and drug-releasing profile all possible. The greatest challenge of multilayer constructs is to mechanically integrate consecutive layers to avoid delamination, especially when using multiple manufacturing processes. Here, we review the development of multilayer scaffolds that aim to recapitulate native periodontal tissue interfaces in terms of physical, chemical, and biological characteristics. Important properties of multiphasic biodegradable scaffolds are highlighted and summarised, with design requirements, biomaterials, and fabrication methods, as well as post-treatment and drug/growth factor incorporation discussed.Article Citation - WoS: 6Citation - Scopus: 5Gelatin-Containing Porous Polycaprolactone Polyhipes as Substrates for 3d Breast Cancer Cell Culture and Vascular Infiltration(Frontiers Media Sa, 2024) Jackson, Caitlin E.; Doyle, Iona; Khan, Hamood; Williams, Samuel F.; Dikici, Betul Aldemir; Ledesma, Edgar Barajas; Claeyssens, FrederikTumour survival and growth are reliant on angiogenesis, the formation of new blood vessels, to facilitate nutrient and waste exchange and, importantly, provide a route for metastasis from a primary to a secondary site. Whilst current models can ensure the transport and exchange of nutrients and waste via diffusion over distances greater than 200 mu m, many lack sufficient vasculature capable of recapitulating the tumour microenvironment and, thus, metastasis. In this study, we utilise gelatin-containing polymerised high internal phase emulsion (polyHIPE) templated polycaprolactone-methacrylate (PCL-M) scaffolds to fabricate a composite material to support the 3D culture of MDA-MB-231 breast cancer cells and vascular ingrowth. Firstly, we investigated the effect of gelatin within the scaffolds on the mechanical and chemical properties using compression testing and FTIR spectroscopy, respectively. Initial in vitro assessment of cell metabolic activity and vascular endothelial growth factor expression demonstrated that gelatin-containing PCL-M polyHIPEs are capable of supporting 3D breast cancer cell growth. We then utilised the chick chorioallantoic membrane (CAM) assay to assess the angiogenic potential of cell-seeded gelatin-containing PCL-M polyHIPEs, and vascular ingrowth within cell-seeded, surfactant and gelatin-containing scaffolds was investigated via histological staining. Overall, our study proposes a promising composite material to fabricate a substrate to support the 3D culture of cancer cells and vascular ingrowth.