Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
5 results
Search Results
Article Citation - Scopus: 1Sizing of Autonomous Wind/Solar Hybrid Energy Conversion Systems for Urla, Turkey(ACTA Press, 2009) Özerdem, Barış; Ekren, OrhanIn this paper, an optimum sizing procedure of autonomous hybrid (wind + solar) energy system is presented which can be used to satisfy the requirements of given load distribution. The main purpose of this study is to find out an appropriate wind-photovoltaic hybrid energy system to satisfy electricity consumption of GSM (Global System for Mobile communication) base station at Izmir Institute of Technology Campus Area, Urla, Izmir, Turkey. To do this, monthly average daily solar radiation and wind speed data are collected. The monthly average wind speeds are measured at 10 m height during 3 years period on Izmir Institute of Technology Campus Area. The monthly average wind speed values are obtained between 5.7 and 7.7 m/s, on the other hand, the monthly average daily value of solar radiations on horizontal surfaces are ranged from 1.4 to 6.9kWh/m2 at Izmir Institute of Technology Campus Area. The hybrid system considered in the present analysis consists of one 5kW nominal power wind energy conversion systems (WECS), 21.82 m2 of photovoltaic (PV) panels (18 mono crystal PV panels each having 75 W power output) together with a battery storage system.Article Citation - WoS: 19Citation - Scopus: 20Numerical Analysis of a Near-Room Magnetic Cooling System(Elsevier Ltd., 2017) Ezan, Mehmet Akif; Ekren, Orhan; Metin, Çağrı; Yılancı, Ahmet; Bıyık, Emrah; Kara, Salih MuratIn this study, for a near-room-temperature magnetic cooling system, a decoupled multi-physics numerical approach (Magnetism, Fluid Flow, and Heat Transfer) is developed using a commercial CFD solver, ANSYS-FLUENT, as a design tool. User defined functions are incorporated into the software in order to take into account the magnetocaloric effect. Magnetic flux density is assumed to be linear during the magnetization and demagnetization processes. Furthermore, the minimum and maximum magnetic flux densities (Bmin and Bmax) are defined as 0.27 and 0.98, respectively. Two different sets of analyses are conducted by assuming an insulated cold heat exchanger (CHEX) and by defining an artificial cooling load in the CHEX. As a validation case, experimental work from the literature is reproduced numerically, and the results show that the current methodology is fairly accurate. Moreover, parametric analyses are conducted to investigate the effect of the velocity of heat transfer fluid (HTF) and types of HTF on the performance of the magnetic cooling system. Also, the performance metrics of the magnetic cooling system are investigated with regards to the temperature span of the magnetic cooling unit, and the cooling load. It is concluded that reducing the cycle duration ensures reaching lower temperature values. Similarly, reducing the velocity of the HTF allows reducing the outlet temperature of the HTF. In the current system, the highest temperature spans are obtained numerically as around 6 K, 5.2 K and 4.1 K for the cycle durations of 4.2 s, 6.2 s and 8.2 s, respectively.Article Citation - WoS: 12Citation - Scopus: 15Assessment and Improvement of Indoor Environmental Quality in a Primary School(Taylor and Francis Ltd., 2017) Ekren, Orhan; Karadeniz, Ziya Haktan; Atmaca, İbrahim; Ugranlı Çiçek, Tuğba; Sofuoğlu, Sait Cemil; Toksoy, MacitThis study reports levels of indoor environmental quality variables before and after installation of heat recovery ventilation in a primary school located in an urban area in Izmir, Turkey. A CO2-based modeling was performed to determine the required flow rates that would comply with an international ventilation standard, followed by computational fluid dynamics modeling for best airflow distribution in a classroom. Temperature, CO2, PM2.5, and total volatile organic compounds were found at undesired levels, among which relative humidity, CO2, and PM2.5 were improved after the intervention. Reductions in the mean and maximum concentrations were 29% and 68% for CO2 and 29% and 46% for PM2.5. This intervention study was a part of the city-wide main project that aimed to increase awareness of the students and their families, teachers, and staff regarding importance of indoor environmental quality in both at school and home due to its possible effects on children's health and academic performance, one of the major challenges of today's societies all around the globe.Conference Object Citation - WoS: 3Citation - Scopus: 3Performance Assessment of a Near Room Temperature Magnetic Cooling System(Elsevier Ltd., 2017) Ekren, Orhan; Yılancı, Ahmet; Ezan, Mehmet Akif; Kara, Salih Murat; Bıyık, EmrahIn this study, performance of a near room temperature magnetic cooling system was investigated experimentally in terms of temperature span. The current setup has a permanent magnet pairs (0.7 Tesla), a magnetocaloric material (Gadolinium) and a heat transfer fluid (water, ethylene glycol and 10% ethanol-water mixing) furthermore solar energy was used as a power source of liner motion of the magnetic system. The obtained results showed that ethanol-water was the best heat transfer fluid and also that optimum magnetization-demagnetization period for the system was found 10 s. © 2017 The Authors.Article Citation - WoS: 103Citation - Scopus: 132Break-Even Analysis and Size Optimization of a Pv/Wind Hybrid Energy Conversion System With Battery Storage - a Case Study(Elsevier Ltd., 2009) Ekren, Orhan; Yetkin Ekren, Banu; Özerdem, BarışThis paper aims to show an optimum sizing procedure of autonomous PV/wind hybrid energy system with battery storage and a break-even analysis of this system and extension of transmission line. We use net present value (NPV) method for the comparison of autonomous hybrid energy system and extension of transmission line cases. The case study is completed for the satisfaction of the electricity consumption of global system for mobile communication base station (GSM) at Izmir Institute of Technology Campus Area, Urla, Izmir, Turkey. First, we optimize the PV/wind energy system using response surface methodology (RSM) which is a collection of statistical and mathematical methods relying on optimization of response surface with design parameters. As a result of RSM, the optimum PV area, wind turbine rotor swept area, and battery capacity are obtained as 3.95 m2, 29.4 m2, 31.92 kW h, respectively. These results led to $37,033.9 hybrid energy system cost. Second, break-even analysis is done to be able to decide the optimum distance where the hybrid energy system is more economical than the extension of the transmission line. The result shows that, if the distance between national electricity network and the GSM base station location where the hybrid energy system is assumed to be installed is at a distance more than 4817 m, the installation of hybrid energy system is more economical than the electricity network.