Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
12 results
Search Results
Article Citation - WoS: 12Citation - Scopus: 13Integration of Psychological Parameters Into a Thermal Sensation Prediction Model for Intelligent Control of the Hvac Systems(Elsevier, 2023) Turhan, Cihan; Turhan, Cihan; Gökçen Akkurt, Gülden; Gökçen Akkurt, Gülden; 03.10. Department of Mechanical Engineering; 03.06. Department of Energy Systems Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyConventional thermal comfort models take physiological parameters into account on thermal comfort models. On the other hand, psychological behaviors are also proven as a vital parameter which affects the thermal sensation. In the literature, limited studies which combine both physiological and psychological parameters on the thermal sensation models are exist. To this aim, this study develops a novel Thermal Sensation Prediction Model (TSPM) in order to control the HVAC system by considering both parameters. A data-driven TSPM, which includes Fuzzy Logic (FL) model, is developed and coded using Phyton language by the authors. Two physiological parameters (Mean Radiant Temperature and External Temperature) and one psychological parameter (Emotional Intensity Score (EIS) including Vigour, Depression, Tension with total of 32 subscales) are selected as inputs of the model. Besides the physiological parameters which are decided intentionally considering a manual ventilated building property, the most influencing three sub- psychological parameters on thermal sensation are also selected in the study. While the physiological parameters are measured via environmental data loggers, the psychological parameters are collected simultaneously by the Profile of Mood States questionnaire. A total of 1159 students are participated to the questionnaire at a university study hall between 15th of August 2021 and 15th of September 2022. The results showed that the novel model predicted Thermal Sensation Vote (TSV) with an accuracy of 0.92 of R2. The output of this study may help to develop an integrated Heating Ventilating and Air Conditioning (HVAC) system with Artificial Intelligence – enabled Emulators that also includes psychological parameters. © 2023 Elsevier B.V.Article Citation - WoS: 7Citation - Scopus: 7Comprehensive Thermoeconomic Study of a New Solar Thermosyphon-Assisted Multigeneration System(Elsevier, 2023) Anamaq, Rasoul Najafi; Mohammadpourfard, Mousa; Khani, Leyla; Gökçen Akkurt, Gülden; Mohammadpourfard, Mousa; Heris, Saeed Zeinali; Gökçen Akkurt, Gülden; 03.06. Department of Energy Systems Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyNowadays, due to the global energy crisis, limited reservoirs of fossil fuels, and their negative environmental effects, the use of renewable energy sources and multigeneration systems have become good alternatives for conventional thermodynamic systems. One of these resources, whose technology has developed rapidly in recent years, is the use of solar energy for the simultaneous generation of various products. Therefore, in this research, a multigeneration system with several subsystems is introduced. The proposed system includes a solar energy collector to receive thermal energy, two thermal energy storage tanks, an organic Rankine cycle, and a Kalina cycle to generate electricity, a multi-effect distillation unit to produce fresh water, an electrolyzer to produce hydrogen, as well as heat recovery for hot water and hot air generation. In this multigeneration system, the cooling unit is designed with the help of a thermosyphon. The performance of the proposed system is studied from energy, exergy, environmental, and exergoeconomic viewpoints using Aspen HYSYS and EES software. The obtained results show that due to the addition of the thermosyphon unit to the refrigeration system, the exergy efficiency increases from 55.62% to 70.26%. As a result of this combination, the performance of the whole system is improved and the amount of costs are reduced. In addition, the parabolic collector system has the highest exergy destruction ratio, 39%, among the subsystems. Furthermore, the results of the exergoeconomic analysis indicate that the PEM water heater with 33.3% and the ejector with 22.7% own the highest cost destruction rates.Article Citation - WoS: 49Citation - Scopus: 51Energy, Exergy, Exergoeconomic, and Exergoenvironmental (4e) Analysis of a New Bio-Waste Driven Multigeneration System for Power, Heating, Hydrogen, and Freshwater Production: Modeling and a Case Study in Izmir(Elsevier, 2023) Tabriz, Zahra Hajimohammadi; Mohammadpourfard, Mousa; Gökçen Akkurt, Gülden; Heris, Saeed Zeinali; 03.06. Department of Energy Systems Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyToday, the world is facing numerous challenges such as the increasing demand for energy, fossil fuels reduction, the growth of atmospheric pollutants, and the water crisis. In the present research, a new multigeneration system based on urban sewage bio-waste has been designed and evaluated for power, hydrogen, freshwater, and heating production. This system, which consists of biomass conversion subsystem, hydrogen production unit, Brayton cycle, atmospheric water harvesting unit, steam Rankine cycle, and organic Rankine cycles, has been evaluated from a thermodynamic point of view, and the energy, exergy, exergoeconomic, and exergoenvironmental analyses have been carried out on it. In the current study, the atmospheric water harvesting unit, as an attractive and environmentally friendly technology, is integrated with this Biomass-based multigeneration. A case study has been conducted on this system using the information collected from cigli wastewater treatment plant located In Izmir province, Turkey, and the results indicate that such a system, in addition to receiving sewage sludge from the treatment plant unit as a polluting waste, can produce added value products. The modeling results show that in the base conditions and with a feed rate of 7.52 kg/s, the total power generated by this system is 17750 kW, the hydrogen production rate is 3180 kg/h, the freshwater production rate is more than 18 l/h, and the energy and exergy efficiencies are 35.48% and 40.18%, respectively. According to the exergoeconomic and exergoenvironmental evaluations, the unit cost of total products and the unit emission of carbon dioxide are calculated as 13.05 $/GJ and 0.2327 t/MWh, respectively. Also, the results of parametric studies show that increasing the rate of Biomass improves the overall energy efficiency and production rates and also reduces the unit emission of carbon dioxide, but on the other hand, it causes a decrease in exergy efficiency and an increase in the unit cost of total products.Article Citation - WoS: 26Citation - Scopus: 25Biomass Driven Polygeneration Systems: a Review of Recent Progress and Future Prospects(Elsevier, 2023) Tabriz, Zahra Hajimohammadi; Khani, Leyla; Mohammadpourfard, Mousa; Gökçen Akkurt, Gülden; 03.06. Department of Energy Systems Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyBiomass is the most widely used renewable energy source which is highly appreciated due to its high availability and non-intermittent nature. Considering problems such as reduction of fossil fuels, global warming, and emission of greenhouse gases, lack of attention to the existing situation may cause irreversible damage to the future of the planet. In addition to using renewable energy sources, improving the efficiency of systems will also be helpful. Polygeneration systems play an important role in increasing efficiency and reducing pollution. So, the use of biomass in polygeneration systems seems to be a great approach for sustainable development. Recent studies on biomass-based polygeneration systems have focused on how to use biomass and integrate diverse subsystems to achieve the best performance from energy and exergy viewpoints. The present paper reviews biomass-based systems, and the parameters affecting the performance of these systems. The literature review shows that the high exergy destruction rate in the gasifiers is the most frequent problem among recent articles. In addition, despite the advantages of anaerobic digestion process, the number of studies conducted on the use of this method for biomass conversion is small. In the end, results, limitations, and future outlooks of these systems are discussed.Article Citation - WoS: 9Citation - Scopus: 10Energy and Exergy Analysis of Combined Power, Methanol, and Light Olefin Generation System Fed With Shale Gas(Elsevier, 2022) Khani, Leyla; Mohammadpourfard, Mousa; Tabriz, Zahra Hajimohammadi; Gökçen Akkurt, Gülden; Mohammadpourfard, Mousa; Gökçen Akkurt, Gülden; 03.06. Department of Energy Systems Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyEnvironmental problems and limitations of fossil fuel resources, especially crude oil, have intensified the importance of using cleaner and cheaper fuels besides enhancing energy conversion processes. Therefore, a novel power, methanol, and light olefin multi-generation system is designed and modeled in this paper. Chemical looping reforming, chemical looping combustion cycles, and Rankine power system are combined with methanol and light olefin production processes. The input fuel of the system is shale gas. The mass, energy, and exergy balance equations are applied for each system unit as a steady-state control volume to assess its thermodynamic operation. Then, the effects on the system performance of critical parameters are studied comprehensively. The results show that the necessary syngas can be supplied when 71.5% of the inlet shale gas is used in the steam reforming reactor of the chemical looping reforming cycle, and the steam to fuel ratio and carbon dioxide to fuel ratio are 0.61. Furthermore, if 31% of the produced methanol is consumed in the olefin production unit, the system energy and exergy efficiencies are achieved at 67.3% and 71.5%, respectively. In this case, the carbon dioxide flow rate is 800 kmol/hr, separated and stored in the chemical looping combustion cycle, leading to a clean thermodynamic system.Article Citation - WoS: 38Citation - Scopus: 40Exergoeconomic Analysis and Optimization of a High-Efficient Multi-Generation System Powered by Sabalan (savalan) Geothermal Power Plant Including Branched Gax Cycle and Electrolyzer Unit(Elsevier, 2022) Seiiedhoseiny, Miryasin; Mohammadpourfard, Mousa; Gökçen Akkurt, Gülden; Gökçen Akkurt, Gülden; 03.06. Department of Energy Systems Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyEmploying suitable subsystems to reach high efficiency and low cost in renewable-based power plants is more crucial. The geothermal energy heat source is located in many countries, but this has never been investigated to run a multi-generation system, including a branched GAX cycle and an electrolyzer. In this path, a high-efficient multi-generation system powered by a Sabalan (Savalan) geothermal power plant consisting of a single flash cycle, a branched GAX cycle, and an electrolyzer is presented and scrutinized from thermodynamic and exergoeconomic viewpoints. In the end, a two-objective optimization, by using the Total Unit Cost of Product (TUCP) and energy efficiency as objectives, is utilized to find the optimum operating conditions. Critiques and studies of variables reveal that the produced hydrogen rate remains unchanged at 5.655 kg/h by changing the degassing value and temperature of the generator, condenser 2, and evaporator. By increasing the flash tank pressure from 5.2 bar to 7 bar, the cooling and heating loads rise about 108.4%, while the net electricity falls from 3977 kW to 3506 kW. Interestingly, the TUCP has a minimum value at the evaporator temperature of 273 K and condenser 2 temperature of 322.3 K. The optimization results indicate the values of the produced hydrogen rate and net electricity with 5.85 kg/h and 4187 kW are more than those of the base case. Also, the optimal values are 7.046 $/GJ, 36.82%, and 65.42% for the TUCP and energy and exergy efficiencies, respectively.Article Citation - WoS: 58Citation - Scopus: 76Utilization of Renewable Energy Sources in Desalination of Geothermal Water for Agriculture(Elsevier, 2021) Tomaszewska, Barbara; Gökçen Akkurt, Gülden; Gökçen Akkurt, Gülden; Bujakowski, Wieslaw; Baba, Alper; Jarma, Yakubu A.; Baba, Alper; Bryjak, Marek; Kabay, Nalan; 03.03. Department of Civil Engineering; 03.06. Department of Energy Systems Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyThe agricultural sector, which is highly dependent on water, is urged to build on improved water management practices and explore available options to match supply and demand because of the water scarcity risks and a sustainable and productive agri-food chain. Geothermal water is an energy source used to generate electricity and/or heat. After harnessing its energy, the remaining water can be used as a water source for irrigation following treatment because of its high ionic content. Geothermal fields are mostly located in rural areas where agricultural activities exist. This would be a good match to decrease the transportation cost of irrigation water. The energy demand of the desalination process for agriculture is higher, requiring additional post-treatment processes. Fossil fuels to fulfill the energy requirements are becoming expensive, and greenhouse gas emissions are harmful to the environment. Thus, efforts should be directed towards integrating renewable energy resources into desalination process. This work focuses on presenting a comprehensive review of geothermal water desalination which is powered by renewable energy and provides specific cases from Turkey and Poland. Furthermore, possible new generation renewable energy systems in desalination are introduced, considering their potential application in the desalination of geothermal water for agricultural irrigation.Article Citation - WoS: 20Citation - Scopus: 23Thermal Comfort Analysis of Historical Mosques. Case Study: the Ulu Mosque, Manisa, Turkey(Elsevier, 2021) Diler, Yusuf; Gökçen Akkurt, Gülden; Turhan, Cihan; Durmuş Arsan, Zeynep; Durmuş Arsan, Zeynep; Turhan, Cihan; Gökçen Akkurt, Gülden; 02.02. Department of Architecture; 03.10. Department of Mechanical Engineering; 03.06. Department of Energy Systems Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology; 02. Faculty of ArchitectureMosques are sanctuary places for Muslims where they can perform their religious activities and also can communicate with each other. On the other hand, historical mosques may contain artworks which have cultural heritage values. These mosques originally have not any Heating, Ventilating and Air Conditioning systems. For this reason, obtaining thermal comfort becomes a significant issue. In this study, a systematic approach on monitoring and evaluating thermal comfort of historical mosques were developed. As a case study, The Ulu Mosque, Manisa/Turkey was monitored from 2015 to 2018, and thermal comfort evaluation of the mosque was conducted during prayer times based on the method provided by ISO 7730. A dynamic Building Energy Performance Software, DesignBuilder, was used to model the mosque, and the model was calibrated by using hourly indoor temperature data. The calibrated model was then used to evaluate existing conditions of the mosque and develop retrofitting scenarios in order to increase thermal comfort of prayers. Thirteen different scenarios were proposed to improve thermal comfort of prayers during worship periods. The results were evaluated according to EN 16883 for conservation of cultural heritage of the mosque. Electrical radiator heating with intermittent operating schedules was obtained as the best scenario to protect cultural heritage via artworks, while decreasing disssatisfaction level of the prayers from 45% to 10% in winter months. Additionally, intermittent operation saved 46.9% of energy compared to continuous operating schedule. (C) 2021 Elsevier B.V. All rights reserved.Article Citation - WoS: 119Citation - Scopus: 141Dynamic Thermal and Hygrometric Simulation of Historical Buildings: Critical Factors and Possible Solutions(Elsevier, 2020) Gökçen Akkurt, Gülden; Gökçen Akkurt, Gülden; Aste, N.; Borderon, J.; Buda, A.; Calzolari, M.; Chung, D.; Turhan, C.; 03.06. Department of Energy Systems Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyBuilding dynamic simulation tools, traditionally used to study the hygrothermal performance of new buildings during the preliminary design steps, have been recently adopted also in historical buildings, as a tool to investigate possible strategies for their conservation and the suitability of energy retrofit scenarios, according to the boundary conditions. However, designers often face with the lack of reliable thermophysical input data for various envelope components as well as with some intrinsic limitations in the simulation models, especially to describe the geometric features and peculiarities of the heritage buildings. This paper attempts to bridge this knowledge gap, providing critical factors and possible solutions to support hygrothermal simulations of historical buildings. The information collected in the present work could be used by researchers, specialists and policy-makers involved in the conservation of building's heritage, who need to address a detailed study of the hygrothermal performance of historical buildings thorugh dynamic simulation tools.Article Citation - WoS: 15Citation - Scopus: 11The Relation Between Thermal Comfort and Human-Body Exergy Consumption in a Temperate Climate Zone(Elsevier, 2019) Turhan, Cihan; Gökçen Akkurt, Gülden; Gökçen Akkurt, Gülden; Turhan, Cihan; 03.10. Department of Mechanical Engineering; 03.06. Department of Energy Systems Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyHuman body exergy balance calculation method gives minimum human body exergy consumption rates at thermal neutrality (TSV = 0) providing more information on human thermal responses than other methods. The literature is lacking the verification of this method in various climatic zones. The aim of this study is to investigate the relationship between thermal comfort and human body exergy consumption in a temperate climate zone. A small office building in Izmir Institute of Technology campus, Izmir/Turkey, was chosen as a case building and equipped with measurement devices. The occupant was subjected to a survey via a mobile application to obtain his Thermal Sensation Votes. Objective data were collected via sensors and used for predicting occupant thermal comfort and for exergy balance calculations. Under given conditions, the results show that Thermal Sensation Votes are generally zero at a T-i range of 21-23 degrees C and, are mostly lower than Predicted Mean Votes in summer while the opposite is observed in winter. Predicted Mean Votes at minimum Human Body Exergy Consumption rates were on slightly warm side while Thermal Sensation Votes are zero. It means that for given case, the HBexC rate calculation gave a better prediction of the environmental parameters for the best thermal comfort. (C) 2019 Elsevier B.V. All rights reserved.