Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
3 results
Search Results
Review Citation - WoS: 41Citation - Scopus: 42Review on the Parameters of Recycling Ndfeb Magnets Via a Hydrogenation Process(American Chemical Society, 2023) Habibzadeh, Alireza; Küçüker, Mehmet Ali; Gökelma, MertolRegarding the restrictions recently imposed by China on the export of rare-earth elements (REEs), the world may face a serious challenge in supplying some REEs such as neodymium and dysprosium soon. Recycling secondary sources is strongly recommended to mitigate the supply risk of REEs. Hydrogen processing of magnetic scrap (HPMS) as one of the best approaches for magnet-to-magnet recycling is thoroughly reviewed in this study in terms of parameters and properties. The processes of hydrogen decrepitation (HD) and hydrogenation-disproportio-nation-desorption-recombination (HDDR) are two common methods for HPMS. Employing a hydrogenation process can shorten the production route of new magnets from the discarded magnets compared to other recycling routes such as the hydrometallurgical route. However, determining the optimal pressure and temperature for the process is challenging due to the sensitivity to the initial chemical composition and the interaction of temperature and pressure. Pressure, temperature, initial chemical composition, gas flow rate, particle size distribution, grain size, and oxygen content are the effective parameters for the final magnetic properties. All these influencing parameters are discussed in detail in this review. The recovery rate of magnetic properties has been the concern of most research in this field and can be achieved up to 90% by employing a low hydrogenation temperature and pressure and using additives such as REE hydrides after hydrogenation and before sintering.Article Citation - WoS: 1Citation - Scopus: 1Investigating Triple Superphosphate for Lead Removal From Aqueous Solutions(Taylor & Francis, 2022) Souley Garba, Mahamane Chapiou; Kaya, Erol; Gökelma, Mertol; Seyrankaya, AbdullahThe aim of this research is to investigate monocalcium phosphate monohydrate [Ca(H2PO4)2. H2O] also called triple superphosphate (TSP) for the removal of lead (Pb) from aqueous solutions. In this study, TSP was selected amongst various phosphate-based materials and fertilizers to act as the source of orthophosphate (PO43-) which is a powerful tool for metal fixation in soil and water. Thermodynamic equilibrium dissolution-precipitation relationships for the systems of Pb-H2O and Pb-PO43--H2O were drawn with the aid of Eh-pH stability diagrams to determine the predominance areas of different species. The lead phosphate compounds, identified through the stability area diagrams, were verified with the batch precipitation tests performed with standard solutions of lead and TSP at different conditions. It was observed that, depending upon solution conditions, TSP can precipitate 99.9% of the lead from the solution. Lead precipitates, analyzed by x-ray diffraction, showed the formation of lead phosphate compounds. The mechanism of TSP for the removal of lead from aqueous solutions is discussed.Article Citation - WoS: 25Citation - Scopus: 27Characteristic Properties and Recyclability of the Aluminium Fraction of Mswi Bottom Ash(Elsevier, 2021) Gökelma, Mertol; Vallejo-Olivares, Alicia; Tranell, GabriellaThe increasing use of aluminimum in packaging applications results in many different aluminium-based products ending up in consumer mixed-waste bins. This waste is typically incinerated, generating an aluminium-containing bottom ash. The current work investigates the recyclability of the aluminium fraction in the bottom ash from waste incineration plants in the USA, UK and Denmark. Incinerated Al samples from different size fractions (2-6 mm, 6-12 mm and 12-30 mm) were characterized in terms of inherent oxide thickness, re-melting yield/coagulation and composition. The measured average oxide thickness on Al particles was 68 mm (SD=100), with the metal yield and coagulation efficiency measured to between 76 and 92% and 87-99% respectively. Larger particle size fractions resulted in a higher metal yield due to their higher mass to surface ratio. A simplified model correlating metal yield and particle size was proposed. The aluminium content of the melted material was determined to between 95.6 and 98.5% with main impurities being Fe, Si, Mn, Zn, Mg and Cu, corresponding to major aluminium alloying elements and waste charge components. (c) 2021 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).