Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
27 results
Search Results
Review Citation - WoS: 60Citation - Scopus: 66A Comprehensive Review on Environmental and Economic Impacts of Hydrogen Production From Traditional and Cleaner Resources(Elsevier Sci Ltd, 2023) Goren, A. Yagmur; Gören, Ayşegül Yağmur; Khalvati, Ali; Gören, Ayşegül Yağmur; Dinçer, İbrahim; 03.07. Department of Environmental Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyThis review paper considered the potential hydrogen (H2) production methods using conventional fossil fuels and in a cleaner manner with biomass and water resources and evaluated them for economic sustainability, environmental impact, and energy efficiency. The study results revealed that the methods of biomass-based hydrogen production (e.g., photo-fermentation (PF), dark fermentation (DF), and microbial electrolysis cell (MEC)), by energy source, appear to more environmentally friendly than the other evaluated methods in terms of emissions since they offer the potential to significantly reduce CO2 releases when their substrates are derived from renewable resources or wastes. Among the biomass-based processes, the PF is the most environmentally friendly H2 production process, presenting a low global warming potential (GWP) value of 1.88 kgCO2 eq./kgH2 and acidification potential (AP) of 0.003 gSO2/kgH2, it is followed by DF and MEC processes. On the other hand, the highest GWP of 19.85 kgCO2 eq./kgH2 and AP 0.139 kgSO2/kg H2 were obtained for the fossil fuel-based gasification process related to coal mining and transportation operations. Although hydrogen production processes seem to consume high amounts of water sources, such as about 9 kg of water consumed for 1 kg of hydrogen produced during conventional electrolysis, the reality is that in the hydrogen ecosystem the water footprint of the process is reduced drastically where hydrogen is employed as fuel in fuel cell systems and converted back to water while generating electricity. So, the hydrogen ecosystem may diligently be recognized as the water conserving cycle. On the other hand, the study results showed that commercially available fossil fuel based (e.g., coal) gasification and steam-methane reforming processes are more advantageous over other lab scale technologies in terms of cost and process efficiency. Nevertheless, rising carbon costs may reduce the reasonable price of fossil-based H2 and promote the cost-competitiveness of biomass-based renewable H2. Overall ranking results also proved that biomass-based H2 production processes are primarily promising options for H2 production in an environmentally friendly and moderately cost-effective way.Review Citation - WoS: 22Citation - Scopus: 30Comparative Environmental Sustainability Assessment of Biohydrogen Production Methods(Elsevier, 2023) Goren, A. Yagmur; Gören, Ayşegül Yağmur; Khalvati, Ali; Gören, Ayşegül Yağmur; Dinçer, İbrahim; 03.07. Department of Environmental Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyAs energy crisis is recognized as an increasingly serious concern, the topic on biohydrogen (bioH(2)) production, which is renewable and eco-friendly, appears to be a highly-demanding subject. Although bioH(2) production technologies are still at the developmental stage, there are many reported works available on lab- and pilot-scale systems with a promising future. This paper presents various potential methods of bioH(2) production using biomass resources and comparatively assesses them for environmental impacts with a special emphasis on the specific biological processes. The environmental impact factors are then normalized with the feature scaling and normalization methods to evaluate the environmental sustainability dimensions of each bioH(2) production method. The results reveals that the photofermentation (PF) process is more environmentally sustainable than the other investigated biological and thermochemical processes, in terms of emissions, water-fossil-mineral uses, and health issues. The global warming potential (GWP) and acidification potential (AP) for the PF process are then found to be 1.88 kg-CO2 eq. and 3.61 g-SO2 eq., which become the lowest among all processes, including renewable energy-based H-2 production processes. However, the dark fermentation-microbial electrolysis cell (DF-MEC) hybrid process is considered the most environmentally harmful technique, with the highest GWP value of 14.6 kg-CO2 eq. due to their superior electricity and heat requirements. The water conception potential (WCP) of 84.5 m(3) and water scarcity footprint (WSF) of 3632.9 m(3) for the DF-MEC process is also the highest compared to all other processes due to the huge amount of wastewater formation potential of the system. Finally, the overall rankings confirm that biological processes are primarily promising candidates to produce bioH(2) from an environmentally friendly point of view.Book Part Arsenic Removal by Electrocoagulation(Wiley, 2022) Gören, Ayşegül Yağmur; Gören, Ayşegül Yağmur; Kobya, Mehmet; 03.07. Department of Environmental Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyBecause of the toxic impacts on human health, the arsenic (As) limit value in drinking water was decreased from 50 to 10 ?g l-1 by the relevant authorities (WHO 1993; US EPA 2001). In this case, the problem of As pollution in natural water resources used for drinking water has grown even more and turned into a global crisis. According to reports in many parts of the world, over about 230 million people appear to be affected by high arsenic concentrations in groundwater. In this case, it turned out that there was a great need for cost-effective and environmentally friendly technologies from drinking water sources. One of the emerging water treatment technologies in recent years is electrocoagulation (EC) and it has been seen that it is effective in treating As (>99%) from water and eliminates some of the disadvantages of other conventional treatment processes. EC method includes electro-oxidation of anode electrode materials (iron and aluminum) and in situ production of coagulant agents. From groundwater resources with As content of 5-1000 ?g l-1, As removal efficiencies and operating costs (OCS) of EC technology using iron (Fe) and aluminum (Al) anodes were 85.0-99.9% and 0.0020-1.04 US$ m-3, respectively. Different types (plate, scrap, rod, and ball) of electrodes were used for As removal with the EC process, and it was observed that Fe electrodes or Fe-Al hybrid electrodes performed better in As removal. In addition, it has been determined that arsenate (As(V)) removal is more effective than arsenite (As(III)). A significant quantity of As(III) is oxidized in the EC process, resulting in precipitation, adsorption, and metal-oxy hydroxylic complex reactions. EC process has a lower OC to achieve As removal below the permissible WHO value compared to conventional treatment processes, accomplishing it as a further applicable option for As removal. © 2023 John Wiley & Sons, Inc.Article Citation - WoS: 17Citation - Scopus: 20Polyoxometalate-Based Hybrid Composites in Multi-Functional Wastewater Treatment Applications(Elsevier, 2023) Recepoğlu, Yaşar Kemal; Recepoğlu, Yaşar Kemal; Gören, Ayşegül Yağmur; Gören, Ayşegül Yağmur; Orooji, Yasin; Vatanpour, Vahid; Kudaibergenov, Nurbolat; Khataee, Alireza; 03.07. Department of Environmental Engineering; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyThe inorganic polyanionic clusters known as polyoxometalates (POMs) have several structural variations at the nanoscale scale. They have many uses in chemistry, materials science, medicine, and other fields. This review considers the developments in treating hazardous contaminants from wastewater using POMs-based compounds. Four main treatment methods using POM-based compounds to remove water pollutants have been developed: adsorption, photocatalytic treatment, Fenton-like treatment, and membrane separation. Moreover, we report the types of POMs, synthesis procedures, strategies performed to modify POM-based compounds, and their appli-cations in wastewater treatment. To promote the development of these compounds for large-scale production and real-scale applications, gaps in knowledge and recent research obstacles are also pointed out. Most research on metal organic complexes (MOCs) based on POM has focused on using these compounds as catalysts, with little focus on their additional uses. The adsorption and photocatalytic efficiency of modified POM-based compounds are attributed to their enhanced contaminant removal efficiency, and recovery of certain POM-based compounds by magnetic separation is presented as a promising option for their recyclability. Among the reviewed studies, the highest adsorption capacity was 1108.9 mg/g, with a removal efficiency of 100 % for acid red dye using poly-[N,N-dimethyl-dodecyl-(4-vinylbenzyl)ammonium chloride] (PIL)-POM. The studies also indicate that the POM-based adsorbents could be effectively reused to remove pollutants and sustain their activity in 3-10 cycles. This review is believed to provide an overview of recent advancements in POM-based compounds for water and wastewater treatment, offers thorough research to anyone interested in learning more about this topic, and acts as a manual for researchers working in this area.Article Citation - WoS: 7Citation - Scopus: 7Insights Into Sustainability of Engineered Carbonaceous Material-Based Technologies for Advanced Cyanide Removal From Wastewater(Elsevier, 2023) Yoon, Yeojoon; Khataee, Alireza; Recepoğlu, Yaşar Kemal; Gören, Ayşegül Yağmur; 03.07. Department of Environmental Engineering; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyCyanide (CN) is a serious concern in industrial and goldmine wastewater. Strict regula-tory standards have been established by various agencies due to the detrimental effects that CN has on human health. Therefore, before discharge to water bodies or land, it is essential to create a sus-tainable model for the safe removal of CN. Carbon-based materials are well known for their adsorption and oxidation features, which can be conducive to CN removal. This paper reviews the relevant literature on the application of modified and unmodified carbon-based materials to CN removal in water; these materials include activated carbon (AC), graphene, graphene oxide (GO), and carbon nanotubes (CNTs). Moreover, CN removal mechanisms and photocatalytic removal of CN are comprehensively discussed, with a particular emphasis on modifying carbon-based materials. It has been observed that adding various elements to carbon-based materials improves their surface area, functional groups, CN adsorption capacity, and pore volume. Impacts of operational parameters, isotherm models, kinetics, and types of carbon-based materials are also outlined. This study provides insight into the real-scale applicability of carbon-based materials for CN removal from waters. Moreover, this review indicates that essential work on CN removal using carbon-based materials is still needed. Future research should focus on developing modified carbon-based materials to encourage multidisciplinary research. The most crucial gap in the literature is that the studies have been performed on a lab scale. Therefore, further pilot and real-scale applica-tions should be conducted. Overall, the cost assessment, environmental effects, and human health risks of carbon-based materials should be studied in future research to achieve a realistic perspective on applicability on an industrial scale.(c) 2023 THE AUTHORS. Published by Elsevier BV on behalf of Faculty of Engineering, Alexandria University This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/ licenses/by-nc-nd/4.0/).Article Citation - WoS: 12Citation - Scopus: 14Identifying Geogenic and Anthropogenic Aluminum Pollution on Different Spatial Distributions and Removal of Natural Waters and Soil in Çanakkale, Turkey(Amer Chemical Soc, 2023) Hızlı, Sezin; Gören, Ayşegül Yağmur; Koraoğlu, Aybike Gül; Gören, Ayşegül Yağmur; Kobya, Mehmet; 03.07. Department of Environmental Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyThe Canakkale-Kirazli region (Turkey) is enriched with minerals, especially aluminum (Al), which dangerously get transported into aquatic media due to several mining and geological activities in recent years. In this study, Al and other potentially toxic metals (PTMs) including B, Ba, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Si, and Zn, in both water and soil samples, were measured for quality determination. Selected metals were also analyzed by the enrichment factor (EF), the geoaccumulation index (I-geo), the contamination factor (CF), and the pollution load index (PLI) to evaluate both water and soil pollution geogenically or anthropogenically. Also, the metals were clustered to support the pollution source with Pearson's correlation, principal component analysis (PCA), and hierarchical cluster analysis (HCA). Forty-five natural water samples and 12 soil samples were collected spatially. To perform pollution assessment, two fundamental treatment processes to remove Al pollution from the sample including the highest Al concentration (38.38 mg/L) in water were applied: (1) precipitation with pH adjustment and (2) removal with ion exchange. The pH values of water samples were changed in the range of 3-9 to test the dissolution of Al. The results demonstrated that the study area was mostly under the influence of geogenic aluminum pollution.Article Citation - WoS: 31Citation - Scopus: 34Insights Into Engineered Graphitic Carbon Nitride Quantum Dots for Hazardous Contaminants Degradation in Wastewater(Elsevier, 2023) Gören, Ayşegül Yağmur; Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Recepoğlu, Yaşar Kemal; Vatanpour, Vahid; Yoon, Yeojoon; Khataee, Alireza; 03.07. Department of Environmental Engineering; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyIncreased environmental pollution is a critical issue that must be addressed. Photocatalytic, adsorption, and membrane filtration methods are suitable in environmental governance because of their high selectivity, low cost, environment-friendly nature, and excellent treatment efficiency. Graphitic carbon nitride (g-C3N4) quantum dots (QDs) have been considered as photocatalysts, adsorbents, and membrane materials for wastewater treatments, owing to their stability, adsorption capacity, photochemical properties, and low toxicity and cost. This review summarizes g-C3N4 QD synthesis techniques, operating parameters affecting the removal performance in the treatment process, modification effects with other semiconductors, and benefits and drawbacks of g-C3N4 QD-based materials. Furthermore, this review discusses the practical applications of g-C3N4 QDs as adsorbents, photocatalysts, and membrane materials for organic and inorganic contaminant treatments and their value-added product formation potential. Modified g-C3N4 QD-based material adsorbents, photocatalysts, and membranes present potentially applicable effects, such as removal of most waterborne contaminants. Excellent results were obtained for the reduction of methyl orange, bisphenol A, tetracycline, ciprofloxacin, phenol, rhodamine B, E. coli, and Hg. Overall, this paper provides comprehensive background on g-C3N4 QD-based materials and their diverse applications in wastewater treatment, and it presents a foundation for the enhancement of similar unique materials in the future.Article Citation - WoS: 8Citation - Scopus: 8Removal of Arsenic in Groundwater From Western Anatolia, Turkey Using an Electrocoagulation Reactor With Different Types of Iron Anodes(Elsevier, 2022) Kobya, Mehmet; Gören, Ayşegül Yağmur; Özaydın Şenol, Burcu; Gören, Ayşegül Yağmur; 03.07. Department of Environmental Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyElectrocoagulation (EC) is a significantly efficient method for As removal from waters and received considerable attention recently. In this study, the natural groundwater (GW) samples containing As concentrations of GW-1: 538.8 μg L−1, GW-2: 1132.1 μg L−1, and GW-3: 52, 000 μg L−1 were obtained from different provinces and treated by EC process using different iron anodes (plate, ball, and scrap). To achieve drinking water As standard (10 μg L−1), the operational time, applied current, and As removal optimization for all anode types were studied. At applied current of 0.025 A, the As removal efficiency, EC time, and operating cost were >99.9%, 180 min and 0.406 $ m−3 for ball anodes, >99.9%, 100 min and 0.0813 $ m−3 for plate anodes, >99.9%, 80 min and 0.0815 $ m−3 for scrap anodes for GW-3, respectively. It was observed that as the As concentration in the GW increased, the EC time and operating cost increased. Overall, it was concluded that Fe scrap anodes are more advantageous than other types of anodes in terms of operating cost in EC reactor for As removal.Article Citation - WoS: 40Citation - Scopus: 47Boron in Geothermal Energy: Sources, Environmental Impacts, and Management in Geothermal Fluid(Elsevier, 2022) Mott, A.; Recepoğlu, Yaşar Kemal; Baba, Alper; Uzelli, Taygun; Hadi Mosleh, Mojgan; Gören, Ayşegül Yağmur; Ökten, Hatice Eser; Yüksel Özşen, Aslı; Babaei, Masoud; Ökten, Hatice Eser; Gören, Ayşegül Yağmur; Baba, Alper; Feng, C.; Recepoğlu, Yaşar Kemal; Uzelli, Taygun; Uytun, Hüseyin; Morata, Diego; Yüksel Özşen, Aslı; 03.07. Department of Environmental Engineering; 03.02. Department of Chemical Engineering; 03.03. Department of Civil Engineering; 01.01. Units Affiliated to the Rectorate; 01. Izmir Institute of Technology; 03. Faculty of EngineeringThe problem of hazardous chemicals in geothermal fluid is a critical environmental concern in geothermal energy developments. Boron is among the hazardous contaminants reported to be present at high concentrations in geothermal fluids in various countries. Poor management and inadequate treatment of geothermal fluids can release excessive boron to the environment that has toxic effects on plants, humans, and animals. Despite the importance of boron management in geothermal fluid, limited and fragmented resources exist that provide a comprehensive understanding of its sources, transport and fate, and the treatment strategies in geothermal energy context. This paper presents the first critical review from a systematic and comprehensive review on different aspects of boron in geothermal fluid including its generation, sources, toxicity, ranges and the management approaches and treatment technologies. Our research highlights the origin of boron in geothermal water to be mainly from historical water-rock interactions and magmatic intrusion. Excessive concentrations of boron in geothermal fluids have been reported (over 500 mg/L in some case studies). Our review indicated that possible boron contamination in geothermal sites are mostly due to flawed construction of production/re-injection wells and uncontrolled discharge of geothermal water to surface water. The dominancy of non-ionic H3BO3 species makes the selection of the suitable treatment method for geothermal waters limited. Combining boron selective resins and membrane technologies, hybrid systems have provided effluents suitable for irrigation. However, their high energy consumption and course structure of boron selective resins encourage further research to develop cost-effective and environmentally friendly alternatives.Article Citation - WoS: 42Citation - Scopus: 44Boron Carbon Nitride Nanosheets in Water and Wastewater Treatment: a Critical Review(Elsevier, 2022) Recepoğlu, Yaşar Kemal; Gören, Ayşegül Yağmur; Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Khataee, Alireza; 03.07. Department of Environmental Engineering; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyThe availability and accessibility of clean and secure water supplies are pressing technological and scientific issues worldwide. As a result of global water constraints, wastewater treatment and reuse are being evaluated as feasible alternatives to fresh water for agricultural irrigation and domestic and industrial purposes. Boron carbon nitride (BCN) nanosheets have been studied intensively in the last decade in batteries, biosensors, and capacitors, and for use as catalysts, and they have recently been used in wastewater treatment. BCN materials, along with their synthesis processes, characteristics, and application areas in water and wastewater treatment, are discussed thoroughly in this paper. Additionally, synthesis processes for ternary BCN compounds, including chemical vapor deposition, ion beam-aided deposition, magnetron sputtering, and pulsed laser deposition, are described. BCN materials have also been explored because of their flexible electrical features, excellent mechanical strength, outstanding unreactivity, and significant stability, which make them appropriate for a range of severe environment applications. Thus, the use of BCN materials as photocatalysts and adsorbents and in electrochemical reduction and capacitive deionization are also discussed thoroughly. The highest ammonia production of 172,226.5 μg/h.mg.cat and faradic efficiency of 95.3% have been obtained using the BCN@Cu/CNT catalyst, whereas the ammonia production and FE values for metal-free BCN are 7.75 μg/h.mg.cat and 13.8%. Moreover, the maximum attained adsorption capacities of BCN nanosheets for Pb2+ and Hg2+ are 210 and 625 mg/g, respectively. Overall, this review indicates that essential work on BCN nanosheets is still needed. Future research should focus on the development of BCN nanostructures to encourage multidisciplinary research.
- «
- 1 (current)
- 2
- 3
- »