Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
5 results
Search Results
Article Citation - WoS: 5Citation - Scopus: 5Nanoarchitectonics Approach To Graphite/Starch-supported Bioelectrode for Enhanced Supercapacitor Performance(Elsevier, 2025) Goren, Aysegul Yagmur; Dincer, IbrahimThere has been an increasing interest in finding suitable materials for supercapacitor applications in response to the growing need for energy, to use alternative energy sources to fossil fuels in addition to energy storage. In this regard, bio-based carbon-loaded materials can be a promising option for high-performance supercapacitors because of their abundance, diversity, and reproducibility with waste management strategies. In this study, a new graphite-loaded bioelectrode is synthesized for supercapacitor application. The electrochemical performance of the synthesized electrode is tested at room temperature using the cyclic voltammetry method, and the capacity and energy density of the electrodes are evaluated. The electrochemical performance of 1 g of graphiteloaded bioelectrode was 3.5 mA/cm2, while the specific capacitance value was 355.6 F/g at a current density of 0.5 A/g. Furthermore, the bioelectrode provided significant cyclic stability with 93.5% in specific capacitance value after 5000 charge/discharge cycles at the current density of 0.5 A/g. Consequently, the synthesized bioelectrode can be a promising option for energy storage as a sustainable electrode due to its superior conductivity, stability, and low cost.Article Citation - WoS: 1Citation - Scopus: 1Experimental Study for Recovery of Heavy Metals From Contaminated Soil Using Arbuscular Mycorrhizal Fungi(Inderscience Enterprises Ltd, 2025) Budak, Bulent; Onay, Turgut T.; Goren, Aysegul Yagmur; Khalvati, AliSoil micro-organisms like arbuscular mycorrhizal fungi can provide beneficial symbiosis to their host plant and have been adopted to recover metal-polluted soils. This study investigates the removal of heavy metals from soil using phytoremediation in the presence of fungi. The results indicate that the sunflower plant illustrates the highest copper accumulation, with 18.55 mg/kg. In contrast, sunflower and sorghum controls (non-microorganisms) showed weak capability to transfer copper through plant biomass with 0.91 and 0.97 mg/kg, respectively. Both plants showed that phytoremediation can be a promising approach to providing sustainable solutions for soil heavy metal contamination in the presence of fungi.Article Assessment of Heavy Metal Contamination and Removal Using <i>ceratophyllum Demersum</I> L.: a Case Study(inderscience Enterprises Ltd, 2024) Karaoglu, Aybike Gul; Gören, Ayşegül Yağmur; Kobya, Mehmet; Goren, Aysegul Yagmur; Mese, Esra; Tepe, MelikeAssessment of heavy metal contamination in aquatic ecosystems continues to remain challenging. In this regard, Ceratophyllum demersum L. (C. demersum L.) is a common species found in rivers and can be used as a bioindicator to see the accumulation of heavy metals in the plant body. In this study, we aimed to investigate the accumulation of toxic metals and their effects on photosynthetic pigment content in plants for different seasons. The highest metal accumulations were observed in October 2019. The mean boron concentrations were 399 mg/kg in October 2019, while they were measured as 163 mg/kg in July 2020, most probably due to the decreasing agricultural activities in the studied area. However, the highest metal concentrations (aluminium 3,941 mg/kg and iron 5,161 mg/kg) were measured in July 2010. Moreover, the pigment content values were decreased with the increasing metal concentration in plants. The highest pigment content of 4.7 mu g/g was observed in October 2019, related to the low metal contamination in this season. Overall, C. demersum L. is a promising bioindicator of heavy metal pollution in water bodies with a significant amount of heavy metal accumulation capacity in a sustainable manner.Article Citation - WoS: 11Citation - Scopus: 11Renewable-Based Treatment Solution of Reactive Blue 21 Dye on Fly Ash as Low-Cost and Sustainable Adsorbent(Elsevier, 2024) Kobya, Mehmet; Dolaz, Mustafa; Goren, Aysegul YagmurThis study investigated the removal of Reactive Blue 21 (RB 21) dye from aqueous solutions by adsorption, evaluating the waste fly ash (FA). The effects of the parameters, such as initial dye concentration (100-750 mg/ L), initial pH (2.0-8.0), adsorbent dose (1.0-4.0 g/L), and temperature (298-323 K) on the adsorption process were investigated. The optimum initial pH value was 2.0 for the highest RB21 dye removal (75.2 mg/g). At optimized conditions (pH 2.0, an adsorbent dosage of 1.0 g/L, a dye concentration of 750 mg/L, and an equilibrium time of 72 h), the highest adsorption capacity was found to be 105.2 mg/g. Moreover, the results of the kinetic studies fitted the pseudo-second-order kinetic model. Equilibrium data were best represented by the Langmuir isotherm model, with a maximum monolayer adsorption capacity of 103.41 mg/g at 323 K. Delta G0ads values were negative and varied from 11.64 to 9.50 kJ/mol in the temperature range of 298-323 K, the values of enthalpy (Delta Ho ads) and entropy (Delta So ads) of thermodynamics parameters were calculated as 37.62 kJ/mol and 86.67 J/mol K, respectively, indicating that this process was endothermic. Furthermore, the adsorbent costs for powdered activated carbon (PAC) and FA to remove 1 kg of RB 21 dye from aqueous solutions are calculated as 2.52 U.S. $ and 0.34 U.S. $, respectively. It is seen that the cost of FA is approximately 7.4 times lower than PAC. The results showed that FA, a low-cost industrial waste, was promising for the adsorption of RB 21 from aqueous solutions.Review Citation - WoS: 88Citation - Scopus: 102Comprehensive Review and Assessment of Carbon Capturing Methods and Technologies: an Environmental Research(Academic Press inc Elsevier Science, 2024) Goren, Aysegul Yagmur; Erdemir, Dogan; Dincer, IbrahimA majority of the primary contributors of carbon dioxide (CO2) emissions into the environment have really been out of human-made activities. The levels of CO2 in the atmosphere have increased substantially since the time of the industrial revolution. This has been linked to the use of fossil fuels for energy production, as well as the widespread production of some industrial components like cement and the encroaching destruction of forests. An extreme approach is now necessary to develop the right policies and address the local and global environmental issues in the right way. In this regard, CO2 capturing, utilization, and storage are reliable options that industrial facilities can initiate to overcome this problem. Therefore, we have evaluated the two leading technologies that are used for carbon capture: direct (pre-combustion, post-combustion, and oxy-combustion) and indirect carbon (reforestation, enhanced weathering, bioenergy with carbon capture, and agricultural practices) capturing to provide their current status and progresses. Among the considered processes, the post-combustion techniques are widely utilized on a commercial scale, especially in industrial applications. Technology readiness level (TRL) results have showed that amine solvents, pressure-vacuum swing adsorption, and gas separation membranes have the highest TRL value of 9. In addition, the environmental impact assessment methods have been ranked to evaluate their sustainability levels. The highest global warming potential of 219.53 kgCO(2) eq./MWh has been obtained for the post-combustion process. Overall, through this comprehensive review, we have identified some critical research gaps in the open literature in the field of CO2-capturing methods where there are strong needs for future research and technology development studies, for instance, developing stable and cost-effective liquid solvents and improving the adsorption capacity of commercialized sorbents. Furthermore, some research areas, like novel process design, environmental and economic impact assessment of capturing methods with different chemicals and modeling and simulation studies, will require further effort to demonstrate the developed technologies for pilot and commercial-scale applications.