Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
4 results
Search Results
Article Citation - WoS: 5Citation - Scopus: 6The Varying Densification Strain in a Multi-Layer Aluminum Corrugate Structure: Direct Impact Testing and Layer-Wise Numerical Modelling(Elsevier Ltd., 2017) Odacı, İsmet Kutlay; Güden, Mustafa; Güden, Mustafa; Taşdemirci, Alper; Taşdemirci, Alper; Odacı, İsmet Kutlay; 03.10. Department of Mechanical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyAn aluminum (1050 H14) multi-layer corrugated structure composed of brazed 16 trapezoidal zig-zig fin layers was direct impact tested above the critical velocities for shock formation using a modified Split Hopkinson Pressure Bar. The experimentally measured stress-time histories of the cylindrical test samples in the direct impact tests were verified with the simulations implemented in the explicit finite element code of LS–DYNA. The quasi-static experimental and simulation deformation of the corrugated samples proceeded with the discrete, non-contiguous bands of crushed fin layers, while the dynamic crushing started from the proximal impact end and proceeded with a sequential and in-planar manner, showing shock type deformation characteristic. The experimental and numerical crushing stresses and the numerically determined densification strains of the fin layers increased with increasing impact velocity above the critical velocities. When the numerically determined densification strain at a specific velocity above the critical velocities was incorporated, the rigid-perfectly-plastic-locking idealized model resulted in peak stresses similar to the experimental and simulation mean crushing stresses. However, the model underestimated the experimental and simulation peak stresses below 200 m s−1. It was proposed, while the micro inertial effects were responsible for the increase of the crushing stresses at and below subcritical velocities, the shock deformation became dominant above the critical velocities.Article Citation - WoS: 27Citation - Scopus: 30Single- and Double-Layer Aluminum Corrugated Core Sandwiches Under Quasi-Static and Dynamic Loadings(SAGE Publications Inc., 2016) Kılıçaslan, Cenk; Odacı, İsmet Kutlay; Güden, Mustafa; Güden, Mustafa; 03.10. Department of Mechanical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyThe crushing of single- and double-layer zig-zag trapezoidal corrugated core sandwiches was investigated experimentally and numerically at quasi-static and dynamic rates. The buckling stress of sandwiches increased when the rate increased from quasi-static to dynamic. The increased buckling stresses were ascribed to the micro-inertial effects, which altered the buckling mode of the core from three plastic hinges to higher number of plastic hinge formations. The initial buckling stress was numerically shown to be imperfection sensitive when the imperfection size was comparable with the buckling length. The numerical buckling stresses of zig-zag and straight corrugated cores were similar, while higher inertial effects were found in triangular corrugated core.Article Citation - WoS: 11Citation - Scopus: 10Experimental Testing and Full and Homogenized Numerical Models of the Low Velocity and Dynamic Deformation of the Trapezoidal Aluminium Corrugated Core Sandwich(John Wiley and Sons Inc., 2014) Kılıçaslan, Cenk; Odacı, İsmet Kutlay; Güden, Mustafa; Güden, Mustafa; Odacı, İsmet Kutlay; Taşdemirci, Alper; 03.10. Department of Mechanical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyThe simulations of the low velocity and dynamic deformation of a multi-layer 1050-H14 Al trapezoidal zig-zag corrugated core sandwich were investigated using the homogenized models (solid models) of a single core layer (without face sheets). In the first part of the study, the LS-DYNA MAT-26 material model parameters of a single core layer were developed through experimental and numerical compression tests on the single core layer. In the second part, the fidelities of the developed numerical models were checked by the split-Hopkinson pressure bar direct impact, low velocity compression and indentation and projectile impact tests. The results indicated that the element size had a significant effect on the initial peak and post-peak stresses of the homogenized models of the direct impact testing of the single-layer corrugated sandwich. This was attributed to the lack of the inertial effects in the homogenized models, which resulted in reduced initial peak stresses as compared with the full model and experiment. However, the homogenized models based on the experimental stress–strain curve of the single core layer predicted the low velocity compression and indentation and projectile impact tests of the multi-layer corrugated sandwich with an acceptable accuracy and reduced the computational time of the models significantly.Article Citation - WoS: 70Citation - Scopus: 81Experimental and Numerical Studies on the Quasi-Static and Dynamic Crushing Responses of Multi-Layer Trapezoidal Aluminum Corrugated Sandwiches(Elsevier Ltd., 2014) Kılıçaslan, Cenk; Güden, Mustafa; Taşdemirci, Alper; Taşdemirci, Alper; Güden, Mustafa; 03.10. Department of Mechanical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyThe axial crushing responses of bonded and brazed multi-layer 1050 H14 trapezoid alaluminum corru- gated core (fin) sandwich structures, with and without aluminum interlayer sheets in 0°/0° and 0°/90° core orientations, were both experimentally and numerically investigated at quasi-static and dynamic strain rates. Multi-layering the core layers decreased the buckling stress and increased the densification strain. The experimental and simulation compression stress–strain curves showed reasonable agree-ments with each other. Two main crushing modes were observed experimentally and numerically: the progressive fin folding and the shearing interlayer aluminum sheets. Both, the simulation and experimental buckling and post-buckling stresses increased when the interlayer sheets were constraint laterally. The multi-layer samples without interlayer sheets in 0°/90° core orientation exhibited higher buckling stresses than the samples in 0°/0° core orientation. The increased buckling stress of 0°/0° oriented core samples without interlayer sheets at high strain rate was attributed to the micro-inertial effects which led to increased bending forces at higher impact velocities.