Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
23 results
Search Results
Article Citation - WoS: 4Citation - Scopus: 4Zn/Na Co-Doped Hydroxyapatites: Synthesis, Antibacterial, and Bioactivity Studies(Elsevier Science Sa, 2025) Samadi, Hamed; Pakchin, Parvin Samadi; Mohammadpourfard, Mousa; Adibkia, KhosroThe most crucial challenge of post-orthopedic surgery is related to bacterial film formation, which leads to implant failure. In this work, zinc/sodium (Zn/Na) co-doped hydroxyapatite nanoparticles (HA NPs) with different Zn/Na concentrations, including 1, 3, and 5 mol.% were synthesized using a hydrothermal method. Several analyses such as X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Energy Dispersive X-ray Spectroscopy (EDX), Scanning Electron Microscopy (SEM), and N2 ad/desorption were used to pinpoint the properties of as-prepared materials. Field Emission Scanning Electron Microscopy (FE-SEM) and EDX analysis demonstrated that the HA NPs possess an average size of about 30-40 nm and hexagonal morphology with no impurity. XRD patterns confirm that by the increasing amounts of Zn/Na, the crystal size of samples was decreased. FT-IR affirms the correct doping of metal ions. Brunauer-Emmett-Teller (BET) results of co-doped samples demonstrated a microporous structure, which can improve fluid flow in the inner structure of implants. The colony-forming unit (CFU) method conducted the antibacterial test, which confirmed that 5 mol.% Zn/Na co-doped HA NPs showed the highest antibacterial properties against Escherichia coli (PTCC 1276) (E. coli). Cytotoxicity results affirmed that 1 and 3mol.% Zn/Na co-doped HA NPs demonstrated low toxicity. Bioactivity tests revealed that the Zn/Na co-doped samples showed a higher ability to facilitate bone marrow stem cells; thus, improving the proliferation after the immersion in simulated body fluid (SBF). Therefore, Zn/Na co-doped HA NPs could be a promising candidate for bone tissue engineering applications.Review Citation - WoS: 26Citation - Scopus: 28Exploring Geothermal Energy Based Systems: Review From Basics To Smart Systems(Pergamon-elsevier Science Ltd, 2025) Anya, Belka; Mohammadpourfard, Mousa; Akkurt, Gulden Gokcen; Mohammadi-Ivatloo, BehnamMost of the energy demand is currently supplied from fossil fuels, which leads to the accumulation of greenhouse gases and air pollution. A sustainable future can be created globally through the efficient use of renewable energy sources. These sources include wind, solar, geothermal, biomass, and more. Geothermal energy can meet the energy needs of the future as a clean and reliable source and stands out due to certain distinctive features among renewable energy sources. Unlike other renewable energy sources, geothermal energy is not dependent on time or weather, making it a reliable and continuous energy supply. Additionally, it has a lower environmental impact. This review examines the development of geothermal energy systems and their integration into smart technologies, highlighting the potential of geothermal energy for smart energy systems. The focus is on integrating smart systems into geothermal-based setups to enhance efficiency and analyze the state-of-the-art technologies of such systems. Geothermal-based systems can be classified as single generation, co-generation, multigeneration, smart energy systems, and energy hubs. Consequent to examining systems, it has been concluded that geothermal systems have a huge potential, but unfortunately, not all of them are used due to some difficulties. Its development will occur faster, and its share in the renewable energy sector will grow with smart system integration.Article Citation - WoS: 6Citation - Scopus: 7A Comprehensive Study on Doxorubicin-Loaded Aspartic Acid-Coated Magnetic Fe<sub>3</Sub>o<sub>4< Nanoparticles: Synthesis, Characterization and in Vitro Anticancer Investigations(Elsevier, 2024) Jafari, Nahideh; Mohammadpourfard, Mousa; Hamishehkar, HamedMagnetic Fe3O4 nanoparticles (MNPs) hold significant potential across various scientific fields due to their notable properties. For biomedical applications, MNPs must be biocompatible, stable, and possess high magnetic potential. Aspartic acid (ASP) as a coating agent not only provides biocompatibility, stability, and high magnetic potential but also offers the potential for absorbing various drugs for targeted delivery due to its carboxyl and amino functional groups. So, in this study, we synthesized ASP-coated MNPs (ASP-MNPs) through a one-step co-precipitation method and loaded doxorubicin (DOX) onto these nanoparticles to create DOX-ASP-MNPs for targeted drug delivery. Characterization of the nanoparticle confirmed the crystal structure, spherical morphology, and improved size distribution of ASP-MNPs (8.53 +/- 2.56 nm) compared to uncoated MNPs (7.05 +/- 1.89 nm), as analyzed by XRD, FESEM, and TEM. FT-IR and zeta potential assessments (ZP = -6.3 mV for MNPs, ZP = -31.1 mV for ASP-MNPs) verified successful ASP binding, DOX loading, and nanoparticle stability. VSM analysis indicated a slight decrease in saturation magnetism after coating (51.1 emu/g) compared to MNPs (57.4 emu/g). In vitro release studies demonstrated a higher release rate (83 %) of DOX-ASP-MNPs at pH 5.2, indicating their suitability for cancerous cells. Cytotoxicity assays on A-549 cancer cell lines showed a dose-dependent response. DAPI staining revealed that free DOX caused more DNA damage. Cellular uptake studies indicated a time-dependent uptake of DOX-ASP-MNPs, higher at 3 h compared to 1 h, though lower than free DOX uptake due to different uptake pathways. Apoptosis assays over 72 h showed similar apoptotic rates for DOX-ASP-MNPs and free DOX. These findings suggest that ASP-MNPs possess enhanced physicochemical properties and effective drug delivery capabilities, making them a promising candidate for different biomedical applications, particularly targeted cancer therapy.Article Citation - WoS: 4Citation - Scopus: 5A Smart Building Energy Management Incorporating Clustering-Based Tariffs in the Presence of Domestic Solar Energy, Battery, and Electric Vehicle(Pergamon-elsevier Science Ltd, 2024) Alilou, Masoud; Mohammadi-ivatloo, Behnam; Mohammadpourfard, MousaSmart buildings play a crucial role in optimizing energy management within the power network. As end-users of the power network, they have the ability to not only reduce economic costs for householders but also modify the technical indices of the power network. To promote efficient device management in smart homes (SH), demand response programs are recommended for consumers. This research investigates the application of clusteringbased electricity pricing strategy aimed at effectively managing the energy devices of a residential smart home. The utilized method categorizes the electricity tariff into five rates according to the clustering of the realtime pricing program. Ward's clustering method is utilized to cluster and determine new electricity tariffs. The primary goal of the energy management program is to minimize the building's energy cost, which is accomplished through the utilization of the multi-verse optimizer. The smart home consists of essential and manageable appliances, a photovoltaic panel (PV), a sodium-sulfur (NaS) battery, and an electric vehicle (EV). The initial parameters of the PV and EV are modeled stochastically by their probability distribution functions and calculated using the Latin hypercube sampling algorithm. The smart building's performance is assessed by taking into account various demand response programs. The numerical results present that the application of the clusteringbased management method has resulted in a significant reduction of 23-43 % in the electricity cost of smart homes. Additionally, the smart home exhibits a more linear consumption pattern when considering the electricity tariffs based on the clustering approach.Article Citation - WoS: 22Citation - Scopus: 24Design, Evaluation, and Optimization of an Integrated Proton Exchange Membrane and Double Flash Geothermal Based Organic Rankine Cycle Multi-Generation System Fed by a Biomass-Fueled Gasifier(Elsevier, 2024) Taheri, Muhammad Hadi; Seker, Utku; Akkurt, Gulden Gokcen; Mohammadpourfard, MousaThis study introduces an innovative approach by formulating and evaluating a synergistic biomass-geothermal structure, emphasizing optimized inter-component connections. The research stands out for its thorough analysis of parameter impacts on the system and variables, addressing an unexplored aspect in integrated energy systems. The multi-generation systems are the integration of a combined gasification gas turbine cycle, double flash geothermal cycle, and proton exchange membrane cycle for the generating power and hydrogen. The overall system and its subsystems are studied to explore how the performance of thermodynamics and the total cost rate are influenced by operating parameters. The best operational conditions for both subsystems and the overall system have been determined by analyzing the impact of operating parameters on the thermodynamic behavior and environmental impact through parametric studies. The findings indicate while Sabalan's current efficiency is 16.26 %, the system energy efficiency reached 24.89 % when coupled with other renewable source. To enhance the system's efficiency, a genetics algorithm was utilized to simultaneously optimize the total cost of exergy destruction and investment cost. The outcome of the multi-objective optimization revealed that the exergy efficiency of optimal point for the system is 29.8 % and a total investment cost is 6 (M$/year).Erratum Author Correction: the Influence of Nano Filter Elements on Pressure Drop and Pollutant Elimination Efficiency in Town Border Stations(Nature Research, 2023) Heris, S.Z.; Ebadiyan, H.; Mousavi, S.B.; Nami, S.H.; Mohammadpourfard, MousaThe original version of this Article contained an error in the order of the author names, which was incorrectly given as Hamed Ebadiyan, Saeed Zeinali Heris, Seyed Borhan Mousavi, Shamin Hosseini Nami & Mousa Mohammadpourfard. Consequently, in the Author Contributions section, “H.E. Investigation. S.Z.H. Supervision, Conceptualization, Methodology, Validation. S.B.M. Formal analysis, Writing original draft. S.H.N. Formal analysis, Writing original draft. M.M. Validation.” now reads: “S.Z.H. Supervision, Conceptualization, Methodology, Validation. H.E. Investigation. S.B.M. Formal analysis, Writing original draft. S.H.N. Formal analysis, Writing original draft. M.M. Validation.” The original Article has been corrected. © 2023, The Author(s).Article Citation - WoS: 8Citation - Scopus: 11Design, Thermodynamic and Economic Evaluation, and Optimization of Gasoline Production From Refinery Furnaces Flue Gas(Elsevier, 2023) Nazerifard, Reza; Mohammadpourfard, Mousa; Heris, Saeed ZeinaliIn this paper, the conversion of refinery furnaces’ flue gas into gasoline through the MTG process is investigated. This approach not only reduces greenhouse gas emissions, but also produces a high-value product, providing economic incentives to adopt this technology. The proposed integrated system comprises an organic Rankine cycle, an amine-based carbon capture unit, a methanol synthesis unit, and an MTG unit. In this study, we evaluated the technical and economic aspects of this conversion process, including the thermodynamic and cost analysis, to assess its viability as a sustainable solution for mitigating CO2 emissions from refineries. Also, using response surface methodology combined with the Box-Behnken design, the proposed integrated system was optimized to minimize the gasoline production cost. The thermodynamic assessment concludes that the energy and exergy efficiencies of the overall system are 73.12% and 85.24%, respectively. The proposed system yields an annual gasoline production rate of >184 million liters. The estimated total capital investment for the proposed system is 172.16 M$, which the methanol synthesis unit with a share of 48.65% is the most expensive one. The results give a gasoline production cost of 1.58 $/kg or 4.28 $/gal for the optimized case. Also, hydrogen has the highest contribution in the production cost, so with a 20% decrease in the price of hydrogen, the production cost of gasoline decreases by 18.71%. With this rate of technological improvement, reductions in the price of hydrogen seem inevitable in not-so-distant years, which makes the proposed system of converting refinery furnaces’ flue gas into gasoline became desirable. © 2023 Elsevier LtdReview Citation - WoS: 21Citation - Scopus: 23A Comprehensive Review of Computational Fluid Dynamics Simulation Studies in Phase Change Materials: Applications, Materials, and Geometries(Springer, 2023) Soodmand, A. Mohammadian; Azimi, B.; Nejatbakhsh, S.; Pourpasha, H.; Farshchi, M. Ebrahimi; Aghdasinia, H.; Mohammadpourfard, Mousa; Heris, S. ZeinaliThermal energy storage systems (TESS) have emerged as significant global concerns in the design and optimization of devices and processes aimed at maximizing energy utilization, minimizing energy loss, and reducing dependence on fossil fuel energy for both environmental and economic reasons. Phase change materials (PCMs) are widely recognized as promising candidates due to their high latent heat storage (LHS) capacity. This review thoroughly evaluates the computational fluid dynamics (CFD) studies conducted in various sections, encompassing materials, modeling, simulation, as well as the results, advantages, and disadvantages of these works. The study is organized into three distinct sections. The first section discusses the applications of PCMs in various areas, including lithium-ion batteries, solar applications, building applications, electronics, and heating and cooling systems. The second section provides a comprehensive summary of cylindrical, rectangular, spherical, arbitrary shapes, and packed-bed geometries employed in TESS. The third section investigates the different types of materials used as PCMs. Based on the findings of this study, it can be concluded that industrial applications of hybrid nanocomposites incorporating PCMs in different geometries pose challenges, particularly in three-dimensional (3D) settings, where instability becomes a significant concern. Hence, further research and investigation are necessary to address these challenges adequately. In conclusion, this study serves as a reference review for future research endeavors in the field of simulating various PCMs in different geometries and applications. It provides valuable insights into the current state of knowledge, highlights potential areas for improvement, and offers guidance for advancing simulation techniques related to PCMs.Article Citation - WoS: 103Citation - Scopus: 113Preparation and Characterizations of Tio2/Zno Nanohybrid and Its Application in Photocatalytic Degradation of Tetracycline in Wastewater(Elsevier, 2023) Zeinali Heris, Saeed; Etemadi, Martin; Mousavi, Seyed Borhan; Mohammadpourfard, Mousa; Ramavandi, BahmanThe photodegradation of tetracycline antibiotics (TC) in an aqueous solution, using the TiO2 nanoparticles, ZnO microparticles, and TiO2/ZnO composite under the UV lamp in a continuous reactor, was performed. The effects of different parameters, such as the initial TC concentration, medium pH, ratio of each photocatalyst, and the flow rate were comprehensively studied. SEM, EDX, and XRD characterization techniques were employed to study the morphology and structure features of the prepared composite. The results revealed that a more significant amount of TC is not easily removed from wastewater. Furthermore, by increasing the pH of the medium to 11, the efficiency of TC degradation was increased, while the amount of removal remained stable at higher pH values. As the flow rate increased up to 190 mL/min, the removal efficiency increased; however, at higher flow rates, lower efficiency was obtained. Moreover, using multivariate analysis and response surface methodology (RSM), a model for removing TC and the effect of experimental parameters on removal efficiency was proposed. The optimal conditions using the RSM method were found to be the reduction efficiency of 78.94 % in pH = 11 (flow rate of 132 mL/min, and TiO2 concentration of 323 mg) and reduction efficiency of 75.89% in pH = 9 (flow rate of 143.19 mL/min and TiO2 concentration of 312.73 mg). © 2023 Elsevier B.V.Article Citation - WoS: 7Citation - Scopus: 7Comprehensive Thermoeconomic Study of a New Solar Thermosyphon-Assisted Multigeneration System(Elsevier, 2023) Anamaq, Rasoul Najafi; Khani, Leyla; Mohammadpourfard, Mousa; Heris, Saeed Zeinali; Gökçen Akkurt, GüldenNowadays, due to the global energy crisis, limited reservoirs of fossil fuels, and their negative environmental effects, the use of renewable energy sources and multigeneration systems have become good alternatives for conventional thermodynamic systems. One of these resources, whose technology has developed rapidly in recent years, is the use of solar energy for the simultaneous generation of various products. Therefore, in this research, a multigeneration system with several subsystems is introduced. The proposed system includes a solar energy collector to receive thermal energy, two thermal energy storage tanks, an organic Rankine cycle, and a Kalina cycle to generate electricity, a multi-effect distillation unit to produce fresh water, an electrolyzer to produce hydrogen, as well as heat recovery for hot water and hot air generation. In this multigeneration system, the cooling unit is designed with the help of a thermosyphon. The performance of the proposed system is studied from energy, exergy, environmental, and exergoeconomic viewpoints using Aspen HYSYS and EES software. The obtained results show that due to the addition of the thermosyphon unit to the refrigeration system, the exergy efficiency increases from 55.62% to 70.26%. As a result of this combination, the performance of the whole system is improved and the amount of costs are reduced. In addition, the parabolic collector system has the highest exergy destruction ratio, 39%, among the subsystems. Furthermore, the results of the exergoeconomic analysis indicate that the PEM water heater with 33.3% and the ejector with 22.7% own the highest cost destruction rates.
- «
- 1 (current)
- 2
- 3
- »