Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
20 results
Search Results
Article Citation - WoS: 6Citation - Scopus: 7Interface-Dependent Phononic and Optical Properties of Geo/Moso Heterostructures(Royal Society of Chemistry, 2022) Yağmurcukardeş, Mehmet; Sözen, Yiğit; Sözen, Yiğit; Peeters, François M.; Şahin, Hasan; Şahin, Hasan; Yağmurcukardeş, Mehmet; 04.04. Department of Photonics; 01. Izmir Institute of Technology; 04. Faculty of ScienceThe interface-dependent electronic, vibrational, piezoelectric, and optical properties of van der Waals heterobilayers, formed by buckled GeO (b-GeO) and Janus MoSO structures, are investigated by means of first-principles calculations. The electronic band dispersions show that O/Ge and S/O interface formations result in a type-II band alignment with direct and indirect band gaps, respectively. In contrast, O/O and S/Ge interfaces give rise to the formation of a type-I band alignment with an indirect band gap. By considering the Bethe-Salpeter equation (BSE) on top of G0W0 approximation, it is shown that different interfaces can be distinguished from each other by means of the optical absorption spectra as a consequence of the band alignments. Additionally, the low-and high-frequency regimes of the Raman spectra are also different for each interface type. The alignment of the individual dipoles, which is interface-dependent, either weakens or strengthens the net dipole of the heterobilayers and results in tunable piezoelectric coefficients. The results indicate that the possible heterobilayers of b-GeO/MoSO asymmetric structures possess various electronic, optical, and piezoelectric properties arising from the different interface formations and can be distinguished by means of various spectroscopic techniques.Article Citation - WoS: 13Citation - Scopus: 15Electronic and Magnetic Properties of Single-Layer Fecl2 With Defects(Amer Physical Soc, 2021) Ceyhan, Eray; Şahin, Hasan; Yağmurcukardeş, Mehmet; Yağmurcukardeş, Mehmet; Peeters, François M.; Şahin, Hasan; 04.04. Department of Photonics; 04. Faculty of Science; 01. Izmir Institute of TechnologyThe formation of lattice defects and their effect on the electronic properties of single-layer FeCl2 are investigated by means of first-principles calculations. Among the vacancy defects, namely mono-, di-, and three-Cl vacancies and mono-Fe vacancy, the formation of mono-Cl vacancy is the most preferable. Comparison of two different antisite defects reveals that the formation of the Fe-antisite defect is energetically preferable to the Cl-antisite defect. While a single Cl vacancy leads to a 1 mu(B) decrease in the total magnetic moment of the host lattice, each Fe vacant site reduces the magnetic moment by 4 mu(B). However, adsorption of an excess Cl atom on the surface changes the electronic structure to a ferromagnetic metal or to a ferromagnetic semiconductor depending on the adsorption site without changing the ferromagnetic state of the host lattice. Both Cl-antisite and Fe-antisite defected domains change the magnetic moment of the host lattice by -1 mu(B) and +3 mu(B), respectively. The electronic ground state of defected structures reveals that (i) single-layer FeCl2 exhibits half-metallicity under the formation of vacancy and Cl-antisite defects; (ii) ferromagnetic metallicity is obtained when a single Cl atom is adsorbed on upper-Cl and Fe sites, respectively; and (iii) ferromagnetic semiconducting behavior is found when a Cl atom is adsorbed on a lower-Cl site or a Fe-antisite defect is formed. Simulated scanning electron microscope images show that atomic-scale identification of defect types is possible from their electronic charge density. Further investigation of the periodically Fe-defected structures reveals that the formation of the single-layer FeCl3 phase, which is a dynamically stable antiferromagnetic semiconductor, is possible. Our comprehensive analysis on defects in single-layer FeCl2 will complement forthcoming experimental observations.Article Citation - WoS: 234Citation - Scopus: 234Quantum Properties and Applications of 2d Janus Crystals and Their Superlattices(American Institute of Physics, 2020) Yağmurcukardeş, Mehmet; Qin, Y.; Yağmurcukardeş, Mehmet; Şahin, Hasan; Peeters, François M.; Tongay, S.; Şahin, Hasan; 04.04. Department of Photonics; 04. Faculty of Science; 01. Izmir Institute of TechnologyTwo-dimensional (2D) Janus materials are a new class of materials with unique physical, chemical, and quantum properties. The name "Janus" originates from the ancient Roman god which has two faces, one looking to the future while the other facing the past. Janus has been used to describe special types of materials which have two faces at the nanoscale. This unique atomic arrangement has been shown to present rather exotic properties with applications in biology, chemistry, energy conversion, and quantum sciences. This review article aims to offer a comprehensive review of the emergent quantum properties of Janus materials. The review starts by introducing 0D Janus nanoparticles and 1D Janus nanotubes, and highlights their difference from classical ones. The design principles, synthesis, and the properties of graphene-based and chalcogenide-based Janus layers are then discussed. A particular emphasis is given to colossal built-in potential in 2D Janus layers and resulting quantum phenomena such as Rashba splitting, skyrmionics, excitonics, and 2D magnetic ordering. More recent theoretical predictions are discussed in 2D Janus superlattices when Janus layers are stacked onto each other. Finally, we discuss the tunable quantum properties and newly predicted 2D Janus layers waiting to be experimentally realized. The review serves as a complete summary of the 2D Janus library and predicted quantum properties in 2D Janus layers and their superlattices.Article Citation - WoS: 28Citation - Scopus: 28Enhanced Stability of Single-Layer W-Gallenene Through Hydrogenation(American Chemical Society, 2018) Badalov, S. V.; Yağmurcukardeş, Mehmet; Yağmurcukardeş, Mehmet; Şahin, Hasan; Peeters, François M.; Şahin, Hasan; 04.04. Department of Photonics; 04. Faculty of Science; 01. Izmir Institute of TechnologyUsing density functional theory based first-principles calculations, the effect of surface hydrogenation on the structural, dynamical, electronic, and mechanical properties of monolayer washboard-gallenene (w-gallenene) is investigated. It is found that the dynamically stabilized strained monolayer of w-gallenene has a metallic nonmagnetic ground state. Both one-sided and two-sided hydrogenations of w-gallenene suppress its dynamical instability even when unstrained. Unlike one-sided hydrogenated monolayer w-gallenene (os-w-gallenene), two-sided hydrogenated monolayer w-gallenene (ts-w-gallenene) possesses the same crystal structure as w-gallenene. Electronic band structure calculations reveal that monolayers of hydrogenated derivatives of w-gallenene exhibit also metallic nonmagnetic ground state. Moreover, the linear-elastic constants, in-plane stiffness and Poisson ratio, are enhanced by hydrogenation, which is opposite to the behavior of other hydrogenated monolayer crystals. Furthermore, monolayer w-gallenene and ts-w-gallenene remain dynamically stable up to relatively higher biaxial strains as compared to borophene. With its enhanced dynamical stability, robust metallic character, and enhanced linear-elastic properties, hydrogenated monolayer w-gallenene is a potential candidate for nanodevice applications as a two-dimensional flexible metal.Article Citation - WoS: 36Citation - Scopus: 34Raman Fingerprint of Stacking Order in Hfs2-Ca(oh)(2) Heterobilayer(American Physical Society, 2019) Yağmurcukardeş, Mehmet; Yağmurcukardeş, Mehmet; İyikanat, Fadıl; Peeters, François M.; Şahin, Hasan; 04.04. Department of Photonics; 04. Faculty of Science; 01. Izmir Institute of TechnologyUsing density functional theory-based first-principles calculations, we investigate the stacking order dependence of the electronic and vibrational properties of HfS2-Ca(OH)(2) heterobilayer structures. It is shown that while the different stacking types exhibit similar electronic and optical properties, they are distinguishable from each other in terms of their vibrational properties. Our findings on the vibrational properties are the following: (i) from the interlayer shear (SM) and layer breathing (LBM) modes we are able to deduce the AB' stacking order, (ii) in addition, the AB' stacking type can also be identified via the phonon softening of E-g(I) and A(g)(III) modes which harden in the other two stacking types, and (iii) importantly, the ultrahigh frequency regime possesses distinctive properties from which we can distinguish between all stacking types. Moreover, the differences in optical and vibrational properties of various stacking types are driven by two physical effects, induced biaxial strain on the layers and the layer-layer interaction. Our results reveal that with both the phonon frequencies and corresponding activities, the Raman spectrum possesses distinctive properties for monitoring the stacking type in novel vertical heterostructures constructed by alkaline-earth-metal hydroxides.Article Citation - WoS: 20Citation - Scopus: 21Monitoring the Effect of Asymmetrical Vertical Strain on Janus Single Layers of Mosse Via Vibrational Spectrum(American Institute of Physics, 2018) Kandemir, Ali; Peeters, François M.; Şahin, Hasan; 04.04. Department of Photonics; 04. Faculty of Science; 01. Izmir Institute of TechnologyUsing first principles calculations, we study the structural and phononic properties of the recently synthesized Janus type single layers of molybdenum dichalcogenides. The Janus MoSSe single layer possesses 2H crystal structure with two different chalcogenide sides that lead to out-of-plane anisotropy. By virtue of the asymmetric structure of the ultra-thin Janus type crystal, we induced the out-of-plane anisotropy to show the distinctive vertical pressure effect on the vibrational properties of the Janus material. It is proposed that for the corresponding Raman active optical mode of the Janus structure, the phase modulation and the magnitude ratio of the strained atom and its first neighbor atom adjust the distinctive change in the eigen-frequencies and Raman activity. Moreover, a strong variation in the Raman activity of the Janus structure is obtained under bivertical and univertical strains. Not only eigen-frequency shifts but also Raman activities of the optical modes of the Janus structure exhibit distinguishable features. This study reveals that the vertical anisotropic feature of the Janus structure under Raman measurement allows us to distinguish which side of the Janus crystal interacts with the externals (substrate, functional adlayers, or dopants).Article Citation - WoS: 72Citation - Scopus: 74Electronic and Vibrational Properties of Pbi2: From Bulk To Monolayer(American Physical Society, 2018) Yağmurcukardeş, Mehmet; Şahin, Hasan; Yağmurcukardeş, Mehmet; 04.04. Department of Photonics; 04. Faculty of Science; 01. Izmir Institute of TechnologyUsing first-principles calculations, we study the dependence of the electronic and vibrational properties of multilayered PbI2 crystals on the number of layers and focus on the electronic-band structure and the Raman spectrum. Electronic-band structure calculations reveal that the direct or indirect semiconducting behavior of PbI2 is strongly influenced by the number of layers. We find that at 3L thickness there is a direct-to-indirect band gap transition (from bulk-to-monolayer). It is shown that in the Raman spectrum two prominent peaks, A1g and Eg, exhibit phonon hardening with an increasing number of layers due to the interlayer van der Waals interaction. Moreover, the Raman activity of the A1g mode significantly increases with an increasing number of layers due to the enhanced out-of-plane dielectric constant in the few-layer case. We further characterize rigid-layer vibrations of low-frequency interlayer shear (C) and breathing (LB) modes in few-layer PbI2. A reduced monoatomic (linear) chain model (LCM) provides a fairly accurate picture of the number of layers dependence of the low-frequency modes and it is shown also to be a powerful tool to study the interlayer coupling strength in layered PbI2.Article Citation - WoS: 18Citation - Scopus: 18Ab Initio and Semiempirical Modeling of Excitons and Trions in Monolayer Tis3(American Physical Society, 2018) Torun, Engin; Şahin, Hasan; Chaves, A.; Wirtz, Ludger; Peeters, François M.; 04.04. Department of Photonics; 04. Faculty of Science; 01. Izmir Institute of TechnologyWe explore the electronic and the optical properties of monolayer TiS3, which shows in-plane anisotropy and is composed of a chain-like structure along one of the lattice directions. Together with its robust direct band gap, which changes very slightly with stacking order and with the thickness of the sample, the anisotropic physical properties of TiS3 make the material very attractive for various device applications. In this study, we present a detailed investigation on the effect of the crystal anisotropy on the excitons and the trions of the TiS3 monolayer. We use many-body perturbation theory to calculate the absorption spectrum of anisotropic TiS3 monolayer by solving the Bethe-Salpeter equation. In parallel, we implement and use a Wannier-Mott model for the excitons that takes into account the anisotropic effective masses and Coulomb screening, which are obtained from ab initio calculations. This model is then extended for the investigation of trion states of monolayer TiS3. Our calculations indicate that the absorption spectrum of monolayer TiS3 drastically depends on the polarization of the incoming light, which excites different excitons with distinct binding energies. In addition, the binding energies of positively and the negatively charged trions are observed to be distinct and they exhibit an anisotropic probability density distribution.Article Citation - WoS: 19Citation - Scopus: 21Fundamental Mechanisms Responsible for the Temperature Coefficient of Resonant Frequency in Microwave Dielectric Ceramics(John Wiley and Sons Inc., 2017) Zhang, Shengke; Şahin, Hasan; Şahin, Hasan; Torun, Engin; Peeters, François M.; Martien, Dinesh; DaPron, Tyler; Dilley, Neil; Newman, Nathan; 04.04. Department of Photonics; 04. Faculty of Science; 01. Izmir Institute of TechnologyThe temperature coefficient of resonant frequency (τf) of a microwave resonator is determined by three materials parameters according to the following equation: τf=−(½ τε + ½ τμ + αL), where αL, τε, and τμ are defined as the linear temperature coefficients of the lattice constant, dielectric constant, and magnetic permeability, respectively. We have experimentally determined each of these parameters for Ba(Zn1/3Ta2/3)O3, 0.8 at.% Ni-doped Ba(Zn1/3Ta2/3)O3, and Ba(Ni1/3Ta2/3)O3 ceramics. These results, in combination with density functional theory calculations, have allowed us to develop a much improved understanding of the fundamental physical mechanisms responsible for the temperature coefficient of resonant frequency, τf.Article Citation - WoS: 2Citation - Scopus: 2Structural Changes in a Schiff Base Molecular Assembly Initiated by Scanning Tunneling Microscopy Tip(IOP Publishing Ltd., 2016) Tomak, Aysel; Bacaksız, Cihan; Senger, Ramazan Tuğrul; Şahin, Hasan; Hür, Deniz; Tomak, Aysel; Senger, Ramazan Tuğrul; Birer, Özgür; Şahin, Hasan; Zareie, Hadi M.; 03.01. Department of Bioengineering; 04.04. Department of Photonics; 04.05. Department of Pyhsics; 03. Faculty of Engineering; 04. Faculty of Science; 01. Izmir Institute of TechnologyWe report the controlled self-organization and switching of newly designed Schiff base (E)-4-((4-(phenylethynyl) benzylidene) amino) benzenethiol (EPBB) molecules on a Au (111) surface at room temperature. Scanning tunneling microscopy and spectroscopy (STM/STS) were used to image and analyze the conformational changes of the EPBB molecules. The conformational change of the molecules was induced by using the STM tip while increasing the tunneling current. The switching of a domain or island of molecules was shown to be induced by the STM tip during scanning. Unambiguous fingerprints of the switching mechanism were observed via STM/STS measurements. Surface-enhanced Raman scattering was employed, to control and identify quantitatively the switching mechanism of molecules in a monolayer. Density functional theory calculations were also performed in order to understand the microscopic details of the switching mechanism. These calculations revealed that the molecular switching behavior stemmed from the strong interaction of the EPBB molecules with the STM tip. Our approach to controlling intermolecular mechanics provides a path towards the bottom-up assembly of more sophisticated molecular machines.