Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
38 results
Search Results
Article Citation - WoS: 2Citation - Scopus: 2Speciation of Inorganic and Organometallic Arsenic in Various Matrices With a Novel Spme Fiber Functionalized With Iron Nanoparticles Prior To Lc-Icp Determination(Elsevier, 2025) Boyaci, Ezel; Cagir, Ali; Shahwan, Talal; Eroglu, Ahmet E.A novel SPME-LC-ICP-MS methodology is described for the simultaneous microextraction/speciation/determination of the metabolically critical inorganic and organoarsenic species, namely, As(III), As(V), dimethylarsinic acid (DMA), and monomethylarsonic acid (MMA) in natural waters such as drinking and geothermal waters, and biological fluids such as urine. The novelty of the study stems also from the use of home-made SPME fibers for the extraction process, and from the proposed methodology needing no derivatization step. SPME fibers were prepared with in-tube capillary template approach through the immobilization of iron nanoparticles into agarose matrix. The fibers demonstrated reproducible extraction (<10 % RSD), good mechanical strength and good solvent resistivity. The separation of the analytes was realized by HPLC with a strong anion exchange column via gradient elution using different concentrations of (NH4)(2)CO3 (pH 8.50), and the on-line detection of eluted analytes was achieved by ICP-MS. The validity of the proposed methodology was verified via the analysis of certified reference materials (SRM 1643e, Natural Water-Trace Elements, and SRM 2669, Arsenic Species in Frozen Human Urine) and through spike recovery tests. The values of percentage recovery for SRM 2669 were 90.7 % for As(III), 99.8 % for As(V), 93.6 % for DMA, and 85.9 % for MMA. A good correlation was also found between the certified (60.45 mu gL(-1)) and determined (59.00 mu gL(-1)) values for SRM 1643e. Moreover, the speciation capability of the method was demonstrated on various natural waters and biological fluids.Article Citation - WoS: 1Citation - Scopus: 2A Molecularly Imprinted Polymer as Solid Phase Extraction Sorbent for Ketoprofen Determination in Water and Artificial Serum Prior To Hplc(TÜBİTAK - Türkiye Bilimsel ve Teknolojik Araştırma Kurumu, 2022) Shahwan, Talal; Gürel Özyurt, Elif; Özyurt, Ömer; Ölçer, Yekta Arya; Eroğlu, Ahmet Emin; Boyacı, EzelKetoprofen (KET) is an active pharmaceutical compound that has pain relieving and antipyretic effects. Its determination in body fluids and environmental waters is important due to widespread use of the compound. In this study, a selective and reliable method has been developed for the determination of ketoprofen in water and artificial serum using molecularly imprinted polymers (MIPs) as a solid phase extraction sorbent prior to HPLC-DAD detection. The MIP was synthesized by copolymerization of methacrylic acid (MAA) and trimethylpropane trimethacrylate (TRIM) in the presence of ketoprofen as the template. For the sake of comparison, nonimprinted polymer (NIP) was also synthesized under the same experimental conditions without the addition of ketoprofen under the same experimental conditions. Critical extraction parameters such as sample pH, shaking time and sorbent amount were optimized and adjusted to 8.0, 24 h, and 10.0 mg, respectively, for a sample volume of 10.0 mL. MIP showed higher selectivity than NIP towards ketoprofen in an artificial matrix containing another pain relieving drug, ibuprofen, and a cardiovascular drug, metoprolol. The proposed method was successfully applied for the detection of ketoprofen in spiked drinking water, tap water, and artificial serum samples, and showed satisfactory results with respective recoveries of 96.8 % (± 0.8), 93.7% (± 0.6), 62.2% (± 0.6), and 69.9% (± 0.6).Article Citation - WoS: 8Citation - Scopus: 10Trypsin-Immobilized Silica: a Novel Adsorbent for V(iv) and V(v) Removal From Water(Water Environment Federation, 2018) Erdem Yayayürük, Aslı; Shahwan, Talal; Şanlı Mohamed, Gülşah; Eroğlu, Ahmet EminIn the present study, trypsin-immobilized silica was employed for the removal of V(IV) and V(V) ions from water. The synthesized sorbent was first characterized and then investigated for the removal of V(IV) and V(V) under various experimental conditions. The adsorption performance of the sorbent was tested as a function of pli, sorbent amount, initial vanadium concentration, contact time, and temperature. The sorption process was then investigated, both from a kinetic perspective and also in terms of isotherm models. The Langmuir adsorption isotherm was the best model to describe the sorption process. Sorption thermodynamics were spontaneous and exothermic. The proposed method was successfully applied to real samples for the removal of V(IV)and V(V) with sufficient accuracy and precision.Article Citation - WoS: 13Citation - Scopus: 15Synthesis of Poly-2 Methacrylate-Montmorillonite Nanocomposite Via in Situ Atom Transfer Radical Polymerization(Cambridge University Press, 2008) Oral, Ayhan; Shahwan, Talal; Güler, ÇetinThe poly-2-hyroxyethyl methacrylate (PHEMA)/clay nanocomposite was synthesized by in situ atom transfer radical polymerization (ATRP) from initiator moieties immobilized within the silicate galleries of the clay particles. To produce organically modified montmorillonite (MMT) that has ATRP initiator moiety, a new catalyst that consists of quaternary ammonium salt moiety and an initiator moiety was synthesized. This initiator was intercalated into the interlayer spacing of the MMT. The polymerization reaction was carried out in a mixed solvent system consisting of methyl ethyl ketone and 1-propanol at 50 °C, using the initiator that has been already synthesized with a copper bromide catalyst. The 2, 2′-bipyridyl (bpy) complex was used as ligand. The products were characterized via Fourier transform infrared, nuclear magnetic resonance (1H NMR, 12C NMR), transmission electron microscopy, x-ray diffraction, thermogravimetric analysis, and differential scanning calorimetry. © 2008 Materials Research Society.Article Citation - WoS: 1Citation - Scopus: 1Amalgamation Performances of Gold-Coated Quartz Wool, Alumina, Silica, Sand and Carbon Fiber for the Determination of Inorganic Mercury in Waters by Cold Vapor Atomic Absorption Spectrometry(Pleiades Publishing, 2017) Erdem Şimşek, Arzu; Erdem Yayayürük, Aslı; Shahwan, Talal; Eroğlu, Ahmet EminDifferent gold-coated sorbents for amalgamation were applied for the determination of inorganic mercury in waters using a home-made cold vapor generation unit coupled to atomic absorption spectrometry. Among the gold-coated materials investigated (quartz wool, alumina, silica, sand and carbon fiber) quartz wool was found to give the most efficient results in terms of sorption and release. Analytical performance of the system without and with amalgamation was investigated and it was found that when amalgamation was applied, the linearity and slope of the calibration plots were independent on the sample volume for 1.0, 5.0 and 10.0 mL. Method validation was realized through the analysis of a sample of spring water spiked with 1.0 μg/L inorganic mercury and the spike recoveries were found to be 95 ± 1, 91 ± 3, and 99 ± 5% for 1.0, 5.0, and 10.0 mL, respectively. The results demonstrated that the methodology can be applied to these types of samples directly or after amalgamation, depending on the mercury concentration.Article Citation - WoS: 2Citation - Scopus: 4Use of Electrospun Fiber Mats for the Remediation of Hypersaline Geothermal Brine(Desalination Publications, 2017) Çelik, Aslı; Koç, Gonca; Erdoğan, Emre; Shahwan, Talal; Baba, Alper; Demir, Mustafa MuammerGeothermal brines display high contents of various metal ions that can adversely affect surface and groundwater resources. Nevertheless, it is possible to sequestrate these metals and use some of them in certain engineering applications. The aim of this study was to fabricate electrospun chitosan fiber mats and remove heavy metal cations from geothermal brine of the Tuzla geothermal field (TGF) by employing these mats. TGF is located on the Biga Peninsula in the northwestern part of Turkey. The brine of TGF has high salinity (EC > 91 mS/cm) and high temperature (reservoir temperature is 173°C). The brine is rich in terms of metal cations. For instance, the concentration of lithium ion in geothermal fluid ranges from 17 to 35 mg/L, with little seasonal variations. A horizontal electrospinning setup was employed to obtain a non-woven mat comprising submicron diameter chitosan fibers at 2.0 kV∙cm−1. This material was then utilized as a stable membrane for the removal of metal ions present in the brine through sorption at 25°C overnight. The results showed that the chitosan fiber mats sequestrate various ions in the brine. Under the studied conditions, the material was capable of removing 46%, 44%, 50%, 44%, 40%, 67% and 48% of Li+, Mg2+, Ba2+, Sr2+, Mn2+, Ca2+ and K+ from the geothermal brine, respectively.Article Citation - WoS: 41Citation - Scopus: 40Biosorption of Cu(ii) and Pb(ii) Ions From Aqueous Solution by Natural Spider Silk(Elsevier Ltd., 2011) Pelit, Levent; Ertaş, Fatma Nil; Eroğlu, Ahmet Emin; Shahwan, Talal; Tural, H.Aside from its excellent mechanical properties, spider silk (SS) would offer an active surface for heavy metal interaction due to its rich protein structure. The present study describes the potential use of natural (SS) as a sorbent of heavy metals from aqueous solutions. Single and multi-species biosorption experiments of heavy metals by natural SS were conducted using batch and column experiments. The biosorption kinetics, in general, was found to follow the second-order rate expression, and the experimental equilibrium biosorption data fitted reasonably well to Freundlich isotherm. From the Freundlich isotherm, the biosorption capacities of Cu(II) and Pb(II) ions onto SS were found as 0.20 and 0.007mmolg -1, respectively. The results showed a decrease in the extent of metal ion uptake with lowering the pH.Article Citation - WoS: 45Citation - Scopus: 55Incorporation of Iron Nanoparticles Into Clinoptilolite and Its Application for the Removal of Cationic and Anionic Dyes(Korean Society of Industrial Engineering Chemistry, 2015) Nairat, Muath; Shahwan, Talal; Eroğlu, Ahmet Emin; Fuchs, HaraldThis study reports the preparation of composite sorbents of iron nanoparticles (nZVI) and clinoptilolite at various iron/clinoptilolite ratios. The composites were characterized using various characterization techniques. The material was used for the removal of methylene blue (MB) and methyl orange (MO) as model cationic and anionic dyes. The experiments investigated the effects of time, loading, initial pH, reusability, and temperature on the removal process. According to the results, Cl-nZVI showed fast and quantitative removal over a wide range of concentrations. The removal process was endothermic in nature, and the composite demonstrated reusability for several trials.Other Corrigendum To “modification of a Montmorillonite–illite Clay Using Alkaline Hydrothermal Treatment and Its Application for the Removal of Aqueous Cs+ Ions” [j. Colloid Interface Sci. 295 (2006) 303–309](Elsevier Ltd., 2006) Öztop, Bahar; Shahwan, TalalUnfortunately, we noticed that Ref. [8], which was cited three times in our article, was mistakenly not cited also in the experimental part as the reference on which we based our hydrothermal treatment process. In light of this, the first paragraph of the experimental section (pages 303 and 304) should read...Article Citation - WoS: 33Citation - Scopus: 33Modification of a Montmorillonite-Illite Clay Using Alkaline Hydrothermal Treatment and Its Application for the Removal of Aqueous Cs+ Ions(Elsevier Ltd., 2006) Öztop, Bahar; Shahwan, TalalA montmorillonite-illite clay was modified using alkaline hydrothermal treatment (reflux method) and applied to the removal of aqueous Cs+ ions. The alkaline solutions were prepared by dissolving NaOH in seawater and in distilled water, and the effect of the two alkaline media on the sorption capacities of the modified clay was discussed. The modified materials were characterized using XRD, SEM/EDS, and FTIR. As a result of the modification, the original mineral was partially transformed into a zeolitic material with spherical morphology. The results showed that the modification improved the Cs+ uptake capacity of the starting clay, with the clay modified in distilled water medium demonstrating higher sorption capacity. The sorption data were adequately described using the Freundlich and Dubinin-Radushkevich isotherm models.