Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
13 results
Search Results
Article Citation - WoS: 8Citation - Scopus: 9Polymeric Thermal Analysis of C+h and C+h+ar Ion Implanted Uhmwpe Samples(Elsevier Ltd., 2007) Kaya, N.; Öztarhan, Ahmet M.; Urkaç, Emel Sokullu; Ila, D.; Budak, S.; Oks, E.; Tıhmınlıoğlu, Funda; Muntele, C.Chemical surface characterization of C + H hybrid ion implanted UHMWPE samples were carried out using DSC (differential scanning calorimeter) and TGA (thermal gravimetric analysis) techniques. Samples were implanted with a fluence of 10(17) ion/cm(2) and an extraction voltage of 30 kV. The study of TGA and DSC curves showed that: (1) Polymeric decomposition temperature increased, (2) T-m, Delta C-p and Delta H-m values changed while Delta C-p and Delta H-m increased. T-g value could not be measured, because of some experimental limitations. However, the increase in Delta H-m values showed that T-g values increased, (3) the branch density which indicated the increase in number of cross-link (M-c) decreased in ion implanted samples and (4) increase in Delta H-m values indicated increase in crystallinity of implanted surface of UHMWPE samples.Article Citation - WoS: 54Citation - Scopus: 64Bioactive Fish Scale Incorporated Chitosan Biocomposite Scaffolds for Bone Tissue Engineering(Elsevier Ltd., 2019) Kara, Aylin; Tamburacı, Sedef; Tıhmınlıoğlu, Funda; Havıtçıoğlu, HasanRecently, biologically active natural macromolecules have come into prominence to be used as potential materials in scaffold design due to their unique characteristics which can mimic the human tissue structure with their physical and chemical similarity. Among them, fish scale (FS) is a biologically active material with its structural similarity to bone tissue due to including type I collagen and hydroxyapatite and also have distinctive collagen arrangement. In the present study, it is aimed to design a novel composite scaffold with FS incorporation into chitosan (CH) matrix for bone tissue regeneration. Therefore, two biological macromolecules, fish scale and chitosan, were combined to produce bio-composite scaffold. First, FS were decellularized with the chemical method and disrupted physically as microparticles (100 in), followed by dispersal in CH with ultrasonic homogenisation, CH/FS scaffolds were fabricated by lyophilization technique. Scaffolds were characterized physically, chemically, mechanically, and morphologically. SEM and porosity results showed that CH/FS scaffolds have uniform pore structure showing high porosity. Mechanical properties and degradation rate are enhanced with increasing FS content. In vitro cytotoxicity, proliferation and osteogenic activity of the scaffolds were evaluated with SaOS-2 cell line. CH/FS scaffolds did not show any cytotoxicity effect and the cells were gradually proliferated during culture period. Cell viability results showed that, FS microparticles had a proliferative effect on SaOS-2 cells when compared to control group. ALP activity and biomineralization studies indicated that FS micro particle reinforcement increased osteogenic activity during culture period. As a biological macromolecule with unique characteristics, FS was found as cytocompatible and provided promising effects as reinforcement agents for polymeric scaffolds. In conclusion, fabricated CH/FS bio-composites showed potential for bone tissue engineering applications. (C) 2019 Elsevier B.V. All rights reserved.Article Citation - WoS: 51Citation - Scopus: 60Biosilica Incorporated 3d Porous Scaffolds for Bone Tissue Engineering Applications(Elsevier Ltd., 2018) Tamburacı, Sedef; Tıhmınlıoğlu, FundaAs a natural and abundant silica mineral, diatomite particles (SiO2-nH2O) have been used in several areas such as filtration, photonics, sound and heat insulation, filler material and drug delivery due to its abundance, inexpensive cost, unique morphology and porous structure. But up to date, diatomite incorporated silica based scaffolds have not been used for bone tissue engineering applications. In the present study, the goal was to combine the useful biomaterial properties of both chitosan and diatomite as biocomposite organic/inorganic biomaterial for bone tissue engineering applications and optimize the silica content of the composites in order to obtain optimum morphological structure, high mechanical properties, enlarged surface area and enhanced cell proliferation. The effect of silica loading on the mechanical, morphological, chemical, and surface properties, wettability and biocompatibility of composite scaffolds were investigated. In addition, in vitro cytotoxicity and cellular activities including cell proliferation, ALP activity and biomineralization were investigated in order to determine biological activity of the composite scaffolds. Diatomite particles lead to enhancement in the water uptake capacity of scaffolds. Chitosan-silica composites exhibited 82–90% porosity. Wet chitosan-silica composite scaffolds exhibited higher compression moduli when compared to pure chitosan scaffold in the range of 67.3–90.1 kPa. Average pore size range of chitosan-diatomite composite scaffolds was obtained as 218-319 μm. In vitro results indicated that chitosan-diatomite composites did not show any cytotoxic effect on 3T3, MG-63 and Saos-2 cell lines. Scaffolds were found to be favorable for osteoblast proliferation. Diatomite incorporation showed promising effects on enhancing ALP activity as well as mineral formation on scaffold surface. Thus, the prepared scaffolds in this study can be considered prospective material for bone tissue engineering applications.Article Citation - WoS: 62Citation - Scopus: 72Diatomite Reinforced Chitosan Composite Membrane as Potential Scaffold for Guided Bone Regeneration(Elsevier Ltd., 2017) Tamburacı, Sedef; Tıhmınlıoğlu, FundaIn this study, natural silica source, diatomite, incorporated novel chitosan based composite membranes were fabricated and characterized for bone tissue engineering applications as possible bone regeneration membrane. The effect of diatomite loading on the mechanical, morphological, chemical, thermal and surface properties, wettability and in vitro cytotoxicity and cell proliferation on of composite membranes were investigated and observed by tensile test, atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), protein adsorption assay, air/water contact angle analysis and WST-1 respectively. Swelling studies were also performed by water absorption capacity determination. Results showed that incorporation of diatomite to the chitosan matrix increased the surface roughness, swelling capacity and tensile modulus of membranes. An increase of about 52% in Young's modulus was achieved for 10 wt% diatomite composite membranes compared with chitosan membranes. High cell viability results were obtained with indirect extraction method. Besides, in vitro cell proliferation and ALP activity results showed that diatom incorporation significantly increased the ALP activity of Saos-2 cells cultured on chitosan membranes. The novel composite membranes prepared in the present study with tunable properties can be considered as a potential candidate as a scaffold in view of its enhanced physical & chemical properties as well as biological activities for bone tissue engineering applications.Article Citation - WoS: 96Citation - Scopus: 113Hypericum Perforatum Incorporated Chitosan Films as Potential Bioactive Wound Dressing Material(Elsevier Ltd., 2017) Güneş, Seda; Tıhmınlıoğlu, FundaRecent studies in wound dressing applications offer new therapies and promote wound healing process. The aim of this study was to develop Hypericum perforatum (St John's Wort) oil incorporated chitosan films for wound dressing applications. H. perforatum oil as a potential therapeutic agent was encapsulated in chitosan film to achieve a better wound dressing material. Oil incorporated chitosan films were successfully prepared by solvent casting method in different oil concentrations (0.25–1.5%v/v). Water vapor permeability (WVP), mechanical test, swelling behavior and surface hydrophobicity were performed in order to characterize the prepared films. Antimicrobial test was performed by disc diffusion method and the growth inhibition effects of the films including different amount of H. perforatum oil were investigated on Escherichia coli and Staphylococcus aureus. WVP increased with oil incorporation and the highest value was obtained for 0.25% oil concentration.The highest strain value was obtained in 0.25% oil content films although tensile stress decreased with increasing oil content. H. perforatum oil incorporated films had antimicrobial effect on both microorganisms. Chitosan based films had no cytotoxic effects on NIH3T3fibroblast cells and provided a good surface for cell attachment and proliferation. The results showed that the H. perforatum incorporated chitosan films seems to be a potential and novel biomaterial for wound healing applications.Article Citation - WoS: 96Citation - Scopus: 131Barrier Properties of Corn Zein Nanocomposite Coated Polypropylene Films for Food Packaging Applications(Elsevier Ltd., 2013) Özçalık, Onur; Tıhmınlıoğlu, FundaThe feasibility of corn zein nanocomposite (CZNC) coatings as an alternative to synthetic polymer barrier layer on polypropylene (PP) films was examined. The effect of layered silicate content in the CZNC layers on the barrier and surface hydrophobicity of the CZNC-PP films were investigated. Incorporation of organomodified montmorillonite (OMMT) by solution intercalation into zein matrix significantly improved oxygen and water vapor barrier of coated PP films. The barrier properties were also investigated theoretically by using various phenomenological permeability models. Tortuous permeation path formed by the fine delamination of nanoclays was found to be responsible for the barrier improvements in zein layers. In conclusion, durable CZNC-PP laminates were developed. CZNC coating of PP films has reduced the oxygen permeability nearly four times, while water vapor permeability reduced by 30% with 5 wt.% OMMT content in 5.9 μm corn zein coating.Article Citation - WoS: 105Citation - Scopus: 133Water Vapor and Oxygen-Barrier Performance of Corn-Zein Coated Polypropylene Films(Elsevier Ltd., 2010) Tıhmınlıoğlu, Funda; Atik, İsa Doğan; Özen, BanuA novel corn-zein coating structure on polypropylene (PP) films was developed to examine its feasibility as an alternative water vapor and oxygen-barrier for flexible packaging industry. The barrier properties of the resulting films were evaluated as affected by coating formulation (solvent, corn-zein, plasticizer concentration and plasticizer type). Corn-zein with different amounts (5% and 15%) was dissolved in 70% and 95% aqueous ethanol solution at 50 °C, respectively. Solutions of corn-zein plasticized by polyethylene glycol (PEG) and glycerol (GLY) with various levels (20% and 50%) were applied on corona-discharged-treated PP by using solvent-casting method. The significant improvements in water vapor and oxygen-barrier properties of uncoated PP films were obtained with corn-zein coating. Water vapor permeability (WVP) of the coated films decreased significantly with increasing corn-zein concentration. The application of plasticized corn-zein coating on PP films showed nearly more than three order of reduction in oxygen permeability (OP). The high water vapor and oxygen-barriers were obtained for films coated with coating formulation consisting of higher amounts of corn-zein plasticized by GLY. The statistical analysis defined the key parameters of coating formulation that had major effect on the final properties of coated PP films as corn-zein, plasticizer concentration, and plasticizer type. © 2009 Elsevier Ltd. All rights reserved.Article Citation - WoS: 324Citation - Scopus: 356The Effect of Fiber Surface Treatments on the Tensile and Water Sorption Properties of Polypropylene-Luffa Fiber Composites(Elsevier Ltd., 2006) Demir, Hasan; Atikler, Ulaş; Balköse, Devrim; Tıhmınlıoğlu, FundaThe effects of coupling agents on the mechanical, morphological, and water sorption properties of luffa fiber (LF)/polypropylene(PP) composites were studied. In order to enhance the interfacial interactions between the PP matrix and the luffa fiber, three different types of coupling agents, (3-aminopropyl)-triethoxysilane (AS), 3-(trimethoxysilyl)-1-propanethiol (MS), and maleic anhydride grafted polypropylene (MAPP) were used. The PP composites containing 2-15 wt% of LF were prepared in a torque rheometer. The tensile properties of the untreated and treated composites were determined as a function of filler loading. Tensile strength and Young's modulus increased with employment of the coupling agents accompanied by a decrease in water absorption with treatment due to the better adhesion between the fiber and the matrix. The maximum improvement in the mechanical properties was obtained for the MS treated LF composites. The interfacial interactions improved the filler compatibility, mechanical properties, and water resistance of composites. The improvement in the interfacial interaction was also confirmed by the Pukanszky model. Good agreement was obtained between experimental data and the model prediction. Morphological studies demonstrated that better adhesion between the fiber and the matrix was achieved especially for the MS and AS treated LF composites. Atomic force microscope (AFM) studies also showed that the surface roughness of LFs decreased with the employment of silane-coupling agents.Article Citation - WoS: 35Citation - Scopus: 39Optimisation of the Effect of Colemanite as a New Synergistic Agent in an Intumescent System(Elsevier Ltd., 2006) Atikler, Ulaş; Demir, Hasan; Tokatlı, Figen; Tıhmınlıoğlu, Funda; Balköse, Devrim; Ülkü, SemraAn intumescent system including ammonium polyphosphate (APP) as an acid source and blowing agent, pentaerythritol (PER) as a carbonific agent and colemanite as a synergistic agent is used to enhance flame retardancy of polypropylene (FR-PP). In order to investigate the synergism between colemanite and the flame retardant materials (APP and PER), D-optimal mixture design was employed. The limiting oxygen index (LOI) and amount of residue (AoR) were accepted as response 1 and response 2, respectively. Applying D-optimal strategy, 18 experiments were performed. Filler content was fixed at 30 wt% of total amounts of flame retardant PP composites. Constraints were determined according to the ratio of APP/PER ranging between 1 and 3. Statistical analysis of the cubic model revealed that lack of fit (LoF) was not significant for the cubic and linear model for both responses. The model suggested an optimum composite formulation with concentration levels 65% of APP, 28% of PER and 7% of colemanite that gives an LOI of 40.3. The experimental LOI and AoR of optimum formulation were achieved as 39.3 and 21.4 with 2.5% and 2.2% errors, respectively.Article Citation - WoS: 76Citation - Scopus: 84Characterization of Pure and Silver Exchanged Natural Zeolite Filled Polypropylene Composite Films(Elsevier Ltd., 2005) Pehlivan, Hilal; Balköse, Devrim; Ülkü, Semra; Tıhmınlıoğlu, FundaIn the present study, untreated and silver exchanged natural zeolite-polypropylene (PP) composites were prepared and characterized by means of different techniques (TGA, DSC, mechanical tests, density measurements, optical microscopy and colorometer). The effects of zeolite loading and silver concentration on the composite properties were investigated. The thermal characterization studies showed that the addition of the zeolite increased the crystallinity of the composites acting as a nucleating agent in PP crystallization and retarded the degradation of PP. At low silver concentrations, the zeolite behaved as a decelerating agent in PP degradation, however at higher silver concentrations, the composites degraded at a faster rate than pure PP. The experimental densities of the composites were found to be lower than the theoretical densities. When the tensile tested samples are considered, the densities were even lower indicating porous structure of the films. From the optical micrographs of the tensile tested films, it was clearly seen that the stretching along the machine direction caused hole formation around the particles. The optimum conditions obtained in this study for the PP-silver zeolite composite film production are in the range of 2-4 wt% zeolite treated with 4.36 mg Ag+/g zeolite. At higher zeolite loadings, the film becomes brittle and at higher Ag+ concentrations, the film produced was discolored.