Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
8 results
Search Results
Article Citation - WoS: 3Citation - Scopus: 6Hybrid Photonic-Plasmonic Mode-Coupling Induced Enhancement of the Spontaneous Emission Rate of Cds/Cdse Quantum Emitters(Elsevier, 2022) Gökbulut, Belkıs; İnanç, Arda; Topçu, Gökhan; Özçelik, Serdar; Demir, Mustafa Muammern this paper, a hybrid photonic-plasmonic resonator, which comprises an electrospun polymer fiber with a micrometer diameter and a core/shell nanostructure with a gold nanoparticle core, is constructed to investigate the dynamics of the coupled spontaneous emission of CdS/CdSe quantum dots (QDs). The gold nanoparticle core; covered with a silica shell, anchored with individual CdS/CdSe QDs, is placed inside a hollow cylindrical nanocavity formed on the surface of the microfiber to enable integration of the optical mode with the plasmonic effect, which is induced by the localized surface plasmons of the metal nanoparticle being present in the vicinity of the dipoles. The spontaneous emission rate of the QDs, coupled into the hybrid photonic-plasmonic mode, is measured to enhance by a factor of 23 via a time-resolved experimental technique. This result suggests that the regeneration of the optical mode-field inside the photonic-plasmonic resonator through the interaction of the dipoles with the localized surface plasmons of a metal nanoparticle strongly enhances the density of the electromagnetic states of the quantum emitters to facilitate an enhanced spontaneous emission within the host medium of the proposed polymer based-photonic structure.Article Citation - WoS: 7Citation - Scopus: 9Experimental Apparatus for Simultaneous Measurement of Triboelectricity and Triboluminescence(Elsevier Ltd., 2020) Arıca, Tuğçe A.; Topçu, Gökhan; Pala, Atamert; Demir, Mustafa MuammerTriboelectricity is a phenomenon caused by the accumulation of opposite electric charges on the surfaces of two different materials as a result of contact with each other. The phenomenon of emitting cold light when the material is subjected to physical deformation is called triboluminescence. This paper presents an experimental apparatus that allows simultaneous measurement of both triboelectricity and triboluminescence of a model composite system based on poly (vinylidene fluoride) (PVDF) and europium tetrakis (dibenzoylmethide) triethylammonium (EuD(4)TEA). While the former component was studied in contact-separation mode giving triboelectricity, the latter emits triboluminescence upon application of mechanical impact. The device was operated at varying range of frequencies from 0.5 to 4.8 Hz and the force in the range of 5.4-9.5 N. (C) 2019 Elsevier Ltd. All rights reserved.Article Citation - WoS: 36Citation - Scopus: 39Recent Developments of Colorimetric Mechanical Sensors Based on Polymer Composites(Royal Society of Chemistry, 2020) İnci, Ezgi; Topçu, Gökhan; Güner, Tuğrul; Demirkurt, Merve; Demir, Mustafa MuammerColorimetric mechanical (force, pressure, strain, and impact) sensors allow naked-eye visualization of existing structural deformations of a system occurring upon application of a mechanical action. The combination of mechanochromic materials with polymers offers a practical approach to designing and fabricating these sensors. Polymers as matrices can tolerate a wide range of forces and permits reusability of the sensors. On the other hand, mechanochromic materials provide unique colour properties depending on the type of mechanical action. They have also been frequently employed for the quantification of mechanical forces. As an example, non-centrosymmetric crystals are combined with polymers for sensing impact forces. Structures with photoluminescence and scattering and plasmonic resonances can be used to fabricate strain and pressure responsive composite materials, respectively. This study reviews recent advances in colorimetric mechanical sensor systems prepared using polymers and inorganic and organic mechanochromic materials working under a wide range of forces.Article Citation - WoS: 4Citation - Scopus: 4Color-Tunable All-Inorganic Cspbbr3 Perovskites Nanoplatelet Films for Photovoltaic Devices(American Chemical Society, 2019) Özcan, Mehmet; Özen, Sercan; Topçu, Gökhan; Demir, Mustafa Muammer; Şahin, HasanHerein, we demonstrate a novel coating approach to fabricate CsPbBr3 perovskite nanoplatelet film with heat-free process via electrospraying from precursor solution. A detailed study is carried out to determine the effect of various parameters such as ligand concentration, electric field, flow rate, etc. on the optical properties. By controlling the volume ratios of the oleylamine (OAm) and oleic acid (OA), the coalescing and thickness of the resulting nanoplatelets can be readily tuned that results in control over emission in the range of 100 nm without any antisolvent crystallization or heating processes. The varying electrical field and flow rate was found as inefficient on the emission characteristics of the films. In addition, the crystal films were obtained under ambient conditions on the ITO coated glass surfaces as in the desired pattern. As a result, we demonstrated a facile and reproducible way of synthesizing and coating of CsPbBr3 perovskite nanoplatelets which is suitable for large-scale production. In this method, the ability of tuning the degree of quantum confinement for perovskite nanoplatelets is promising approach for the one-step fabrication of crystal films that may enable the use in optoelectronics.Article Citation - WoS: 25Citation - Scopus: 28Colorimetric and Plasmonic Pressure Sensors Based on Polyacrylamide/Au Nanoparticles(Elsevier, 2019) Topçu, Gökhan; Güner, Tuğrul; İnci, Ezgi; Demir, Mustafa MuammerColorimetric stimuli-responsive nanomaterials have emerged as an eminent tool for sensor applications. Among this class of sensing elements, gold nanoparticle-based (Au NP) nanostructures are promising materials due to their plasmonic features. In this study, free-standing flexible polymeric films having intense optical response upon application of mechanical pressure were fabricated based on polyacrylamide (PAAm) and Au NPs. Pressure may cause plasmonic shift most probably due to the disassembly of the clusters from blue to reddish individual particles depending on the extent of pressure. Temperature, time, and extent of pressure were examined in terms of spectral change of Au particles. The sensor films depict working range up to 160 MPa, which shows minor change at elevated temperatures probably due to the stress induced crystallization of PAAm. For practical applications, a simple red-green-blue (RGB) space-based algorithm was presented for smartphone-assisted detection of applied pressure. Moreover, the PAAm/Au composite structure shows self-healing without any additive under ambient conditions even after divided into pieces. (C) 2019 Elsevier B.V. All rights reserved.Article Citation - WoS: 21Citation - Scopus: 24Colloidal Films of Sio2 in Elastomeric Polyacrylates by Photopolymerization: a Strain Sensor Application(Elsevier, 2020) İnci, Ezgi; Topçu, Gökhan; Demir, Mustafa MuammerThin layer SiO2 colloidal films show angle-dependent coloration (iridescence) based on constructive interference, rather than absorption, without the existence of pigments. The transfer of thin layered colloidal film into a transparent elastomeric matrix maintaining its color may allow the fabrication of colorimetric strain sensors. In this study, trilayer SiO2 colloidal films were prepared by Langmuir-Blodgett deposition using a binary solvent system (chloroform/methanol) and this structure is successfully transferred into poly(ethylene glycol) phenyl ether acrylate elastomer via lateral capillary force. The resulting composite films exhibit iridescence depending on the particle size, therefore, film thickness as similar in mere colloidal films with a slight difference due to change in efficient refractive index (neff). Uniaxial extension of the composite film up to 50 % strain causes a remarkable linear shift in reflection signal from 568 to 496 nm. The change in thickness of the composite film accordingly intercolloidal distance normal to the application of mechanical stretching causes variation of the reflection of light.Article Citation - WoS: 5Citation - Scopus: 5Effect of Chain Topology on Plasmonic Properties of Pressure Sensor Films Based on Poly(acrylamide) and Au Nanoparticles(Elsevier Ltd., 2019) Topçu, Gökhan; Demir, Mustafa MuammerAu nanoparticles have been recognized as a colorimetric sensing element in polymeric systems because clustering shifts the red color of individual particles into saturated blue due to distinct plasmonic variation. The mechanism of pressure sensing is based on the disintegration of the particle clusters into the individual particles in polymers upon application of pressure. Polymers are usually composed of linear chains that provide a viscoelastic medium for their diffusion. Changing topology of polymer chains from linear to crosslinked under fixed pressure makes a clear change in spectral features of the particles probably due to the hindrance of particle diffusion by the crosslinking points. Therefore, the working range of the sensor films can be increased to higher-pressure values. In this work, polyacrylamide/Au nanoparticle films were prepared by various concentrations of formaldehyde as a crosslinking agent from 0.5 to 5.0 wt %. The initial absorption signal gradually shifts from 690 to 545 nm for linear chains upon application of pressure while shifting goes down to 571 nm for crosslinked ones. The colorimetric change is also examined under humid environments. Contrary to the crosslinking process, humid environment facilitates the diffusion of particles since the chains swell with water molecules that provide a convenient medium for particle diffusion.Article Citation - WoS: 14Citation - Scopus: 20Design of Polymeric Antiscalants Based on Functional Vinyl Monomers for (fe, Mg) Silicates(American Chemical Society, 2017) Topçu, Gökhan; Çelik, Aslı; Baba, Alper; Demir, Mustafa MuammerSilica/silicate scaling is one of a few detrimental problems that cause high economical loss in the geothermal and petroleum fields. The prevention of silica/silicate has been attempted using antiscalants with functional groups, particularly -NH2; however, metal silicates are commonly found in the fields, and the antiscalants developed thus far are not effective against these compounds. In this work, polymeric antiscalants have been developed by merging two or more functional comonomers consisting of various chelating groups for metal cations. Homo- and copolymers of acrylamide (AM), the sodium salt of vinyl sulfonic acid (VSA), and vinyl phosphonic acid (VPA) were synthesized to examine their antiscaling performance against metal silicate scaling. Lab-scale metal silicates were obtained in a pressured autoclave reactor. The antiscalants were tested at various dosages (25, 50, and 100 ppm), and their effects were investigated from the leftover decantates after isolation of the solid precipitates. The polymeric antiscalants were found to be particularly effective against metal silicates and ineffective against simple silica precipitates. Acidic groups may be coordinating the metal cations, which prevents the formation of precipitates. Among these acidic comonomers, VSA-containing polymers, in particular, increased the solubility of metal silicates.