Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
7 results
Search Results
Article Citation - Scopus: 2Mixture-Based Dielectric Permittivity Measurements Through Gallium-Excited Cavities(Ieee-inst Electrical Electronics Engineers inc, 2024) Karatay, Anil; Yaman, FatihIn dielectric measurements within resonant cavities, analytical perturbation methods encounter limitations, particularly with nonstandard cavity shapes and lossy materials under test (MUTs) having high dielectric constant. In such cases, the demand for iterative techniques to improve accuracy and flexibility is evident, but the efficiency of the existing iterative techniques, relying on numerical electromagnetic solvers, is often compromised, particularly in terms of time. Therefore, we introduce a novel methodology for measuring the permittivity of dielectric materials using liquid mixtures. This novel method employs a rapid iterative technique in which effective permittivity values are reconstructed at each iteration step based on the volume fraction of liquid mixtures, thus eliminating the dependence on time-consuming 3-D numerical solvers. In addition, we aim to achieve dual-band measurements at 2.45 and 5.8 GHz, enhancing precision by separating mode frequencies. Introducing a re-entrant cavity-like structure, we position the first mode at 2.45 GHz and the second at 5.8 GHz, effectively mitigating intermodal crosstalk and ensuring measurement accuracy. Also, for the first time in the literature, determining which mode will be excited in a cavity by the coupler probe made of gallium can be achieved through the displacement of the liquid metal, which enables measurements to be taken exclusively at the desired frequency.Article Citation - WoS: 3Citation - Scopus: 3Liquid Metal-Tunable Miniaturized Bimodal Cavity for Enhanced Measurement Accuracy in the Ism Bands(Ieee-inst Electrical Electronics Engineers inc, 2024) Karatay, Anil; Yaman, FatihEnhancing measurement accuracy or reducing the effect of the neighboring modes in resonant cavities may necessitate the separation of mode frequencies. However, in ISM-band measurement configurations utilizing a rectangular or cylindrical cavity, the placement of the first two modes at 2.45 and 5.8 GHz is unattainable, necessitating the presence of additional modes in between that would potentially degrade measurement accuracy. This article begins with an analytical approach, employing Lagrange multipliers for the first time to reveal the level of separation achievable in the frequency domain between the initial two modes within these types of conventional cavities. The analytical results were also verified with a numerical grid search. Subsequently, innovative strategies have been introduced to surpass this intrinsic constraint that reduces the measurement accuracy in various applications. A novel miniaturized cavity configuration has been proposed to operate bimodally at 2.45 and 5.8 GHz and manufactured with a 3-D printer. It has been ensured that there are no physical modes present in between, and measurements of the structure have been conducted. Another notable innovation of the article is the capability of tuning the proposed cavity structure by means of liquid metal displacement. Thus, a more flexible tuning method compared to mechanical tuning techniques can be achieved, enabling precise adjustment of the desired measurement frequency. Good agreement between the simulation and measurement results has been reported.Article Citation - WoS: 3Citation - Scopus: 4Liquid Metal-Controlled Dual-Band Doppler Radar for Enhanced Velocity Measurement(IEEE, 2024) Karatay, Anıl; Yaman, FatihDoppler radars, which are critical instruments for velocity measurement, may need to be reconfigured to adapt to different environmental conditions or for ease of use. However, conventional electrical, optical, and physical reconfiguration methods often come with several disadvantages such as deteriorated radiation pattern, reduced radiation efficiency, and high cost. Therefore, the aim of this article is to integrate microwave components that can be controlled using liquid metal (LM) displacement into a Doppler radar to adjust its main lobe direction and operating frequency to the desired values and enhance the measurement capacity of the respective radar. Through this study, multiple parameters of an operational Doppler radar have been simultaneously adjusted using LM displacement exploitation for the first time, thus avoiding the shortcomings associated with conventional reconfiguration methods. To achieve this objective, initially, a back-to-back Vivaldi antenna operating at 2.45 GHz is designed, and beam switching ability is imparted to the structure using the LM displacement method. Subsequently, various techniques are used to convert the structure into a dual-band antenna capable of simultaneous operation at 2.45 and 5.8 GHz, ensuring the desired beam switching feature at both the frequencies. In addition, a power divider capable of switching between the two operating frequencies through LM assistance is proposed, and its integration into the radar system enables the control of both main lobe direction and frequency using the proposed method.Conference Object Citation - WoS: 1An Origami-Inspired Low-Cost Waveguide Design, Fabrication and Measurements for X-Band Satellite Communication Systems(IEEE, 2023) Karatay, Anıl; Ataç, Enes; Yaman, FatihIn many applications such as satellite communication, transmission lines are required and waveguides are widely used in these applications. This passive component, which is an indispensable element of microwave systems, is generally not suitable for practical and low-cost applications due to being produced from costly and heavy metals. Therefore, nowadays, the tendency to use low-cost, light and practical components has increased. In this study, origami-inspired waveguide design for X-band satellite communication systems is aimed. This component, which is formed by folding a paper into a three-dimensional structure and covering it with a conductive material, is both practical and fast to produce, portable and adjustable. The obtained simulation results match well with the experimental results, and it has been proven that the paper-based waveguide performs as well as the conventional aluminum waveguide. This makes the proposed method an innovative and cost-effective solution for waveguide fabrication.Article Citation - WoS: 2Citation - Scopus: 2A Non-Resonant Approach for Dielectric Constant Reconstructions Via Newton Iterations(Elsevier, 2023) Özkal, Ceren; Yaman, FatihIn this study, a Newton–Raphson-based iterative method has been proposed to obtain dielectric constants accurately from measurements. The originalities of the approach lie in its applicability at non-resonant frequencies, which brings a significant experimental simplicity by avoiding critical coupling, expansion of available frequencies in different bands with the same cost-efficient low-Q (?60) cavity. The direct problem involves either measuring power values inside a cavity (14.6 × 5 × 20.6) cm via a spectrum analyzer or simulating the complete setup via CST-MWS software at one of the non-resonant modes, 1.5 GHz. The solution to the inverse problem provides fastly converging results with an error rate of 1% for the unknown permittivities. The experiments were carried out using five different liquid samples even though the proposed technique does not have a limitation on solid materials. Applicability and the effectiveness of the introduced method is illustrated in detail and comparisons with the perturbation method is provided. © 2023 Elsevier GmbHArticle Citation - WoS: 3Citation - Scopus: 4Cost-Effective Experiments With Additively Manufactured Waveguide and Cavities in the S-Band(Iop Publishing Ltd, 2023) Karatay, Anıl; Yilmaz, Hasan Önder; Özkal, Ceren; Yaman, FatihThis study demonstrates the applicability of additively manufactured components that are metalized with conductive tape for two different microwave experiments. We focus on dielectric measurements and prototyping elliptical accelerator cavities at a low power regime for 2.45 GHz. To illustrate the accuracy of our results for the commonly used solid/liquid materials in engineering and to compare the fundamental accelerator cavity parameters with previous research rectangular and elliptic 3D-printed cavities coated with aluminum-type tape were employed in the experiments. Results reported for the complex-valued permittivities and specific design parameters for the cavity prototype are consistent with the literature. Various approaches to obtain the conductivity value of the tape and the effect of the roughness/thickness of the coating on the reflection parameter are discussed in detail. We confirm the effectiveness of the proposed approach, which reduces costs and provides a high degree of accuracy for investigated applications.Article Citation - WoS: 2Citation - Scopus: 2Electromagnetic Effects of Equatorially Misaligned Rf Cavities(IOP Publishing, 2021) Karatay, Anıl; Yaman, FatihOne of the most challenging problems in modern particle accelerator systems is the manufacture of RF cavities within the desired tolerance limits. In this study experimental and computational investigations to quantify the effects of transversal half-cell misalignments on the fundamental accelerator cavity parameters and beam dynamics are presented. Equivalent circuit components of an equatorially misaligned single-cell aluminum elliptical cavity are obtained from the measured data and are employed to calculate longitudinal impedance and modal wake function. Critical coupling and bead-pull measurements are performed at the TM010-like mode frequency, 2.45 GHz for the quality factor and shunt impedance of the high-beta cavity. We report equivalent circuit analysis for higher-order modes and variations of the equivalent circuit components with respect to considered misalignment errors for the MICE experiment's muon cooling cavity. It is shown that using the equivalent circuit model decreases the computational load significantly for the wake field simulations of resonator cavities. Good agreement between simulations and measurements in terms of accelerating cavity parameters and impedances is illustrated.