Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
4 results
Search Results
Article Citation - WoS: 3Citation - Scopus: 3Influence of Cation Size and Polarity on Charge Transport in Ionic Liquid Based Electrolytes(Wiley, 2022) Aydın, Banu; Öner, Saliha; Zafer, Ceylan; Varlıklı, CananImidazolium-based ionic liquids (ILs) with allyl and ether side chains were synthesized and characterized. Comprehensive structural and photoelectrochemical characterizations were performed, transport properties of ILs were also examined as electrolyte components in dye sensitized solar cells (DSSCs). The properties of synthesized materials and DSSC performances were compared with 1-propyl-3-methyl imidazolium iodide (PMII) and 1-allyl-3-ethyl imidazolium iodide (AEII) as reference ILs. Ionic conductivities, diffusion coefficients and charge transfer resistances of synthesized ionic liquids were investigated on DSSCs by Electrochemical Impedance Spectroscopy (EIS). The diffusion coefficient values of triiodide ions in different ionic liquid-based electrolytes were measured by the means of diffusion limited current density method and found to be 1.75×10−7 cm2 s−1 and 2.05×10−7 cm2 s−1 with corresponding photocurrent densities of 10.38 mAcm−2 and 12.13 mAcm−2 for the reference AEII and PMII based electrolytes, respectively. However, for the electrolytes of 1-(2-methoxyethyl)-3-allyl imidazolium iodide and 1-allyl-3-methyl imidazolium iodide ionic liquids, these values were found to be 0.86×10−7 cm2 s−1 and 0.57×10−7 cm2 s−1 with photocurrent densities of 9.53 mAcm−2 and 8.98 mAcm−2, respectively. Allyl and ether substituted imidazolium ILs exhibited promising results as potential alternative electrolyte materials for DSSCs.Article Citation - WoS: 3Citation - Scopus: 4Environmental Assessment of Transparent Conductive Oxide-Free Efficient Flexible Organo-Lead Halide Perovskite Solar Cell(Taylor & Francis, 2020) Sarıaltın, Hüseyin; Geyer, Roland; Zafer, CeylanPerovskite solar cells (PSCs), one of the third-generation photovoltaic (PV) technologies, have recently become a very popular topic in photovoltaic research. This technology, which is a candidate for commercialization in the future, needs to be evaluated from an environmental point of view. The amount of electricity consumption is the most important factor that directly determines the environmental impact values of photovoltaic cell manufacturing. Transparent conductive oxide (TCO) coated glass is one of the major contributors to electricity consumption in PSC architecture. It is therefore useful to investigate the environmental profile of TCO coated glass-free PSC architecture with conventional PVs. One of the solutions to this issue is manufacturing PSC on a flexible substrate. Flexible PVs are considered to be one of the most promising candidates for mass production with its advantages of low-temperature manufacturing, higher efficiency with a lower weight, portability, and compatibility with a roll to roll fabrication. In this work, we show that the environmental impacts of a representative PSCs with a flexible substrate. While the energy payback time (EPBT) of the flexible PSC is already competitive with commercial PVs, the device must reach a 25-year cell lifetime for its global warming potential (GWP) to reach a reasonable range.Article Citation - WoS: 26Citation - Scopus: 26Controlled Growth Mechanism of Poly (3-Hexylthiophene) Nanowires(IOP Publishing Ltd., 2016) Kıymaz, D.; Yağmurcukardeş, Mehmet; Tomak, Aysel; Şahin, Hasan; Senger, Ramazan Tugrul; Peeters, François M.; Zareie, Hadi M.; Zafer, CeylanSynthesis of 1D-polymer nanowires by a self-assembly method using marginal solvents is an attractive technique. While the formation mechanism is poorly understood, this method is essential in order to control the growth of nanowires. Here we visualized the time-dependent assembly of poly (3-hexyl-thiophene-2,5-diyl) (P3HT) nanowires by atomic force microscopy and scanning tunneling microscopy. The assembly of P3HT nanowires was carried out at room temperature by mixing cyclohexanone (CHN), as a poor solvent, with polymer solution in 1,2-dichlorobenzene (DCB). Both π-π stacking and planarization, obtained at the mix volume ratio of P3HT (in DCB):CHN (10:7), were considered during the investigation. We find that the length of nanowires was determined by the ordering of polymers in the polymer repetition direction. Additionally, our density functional theory calculations revealed that the presence of DCB and CHN molecules that stabilize the structural distortions due to tail group of polymers was essential for the core-wire formation.Article Citation - WoS: 32Citation - Scopus: 32Optical and Electrochemical Properties of Polyether Derivatives of Perylenediimides Adsorbed on Nanocrystalline Metal Oxide Films(Elsevier Ltd., 2013) Kuş, Mahmut; Haklı, Özgül; Zafer, Ceylan; Varlıklı, Canan; Demiç, Şerafettin; Özçelik, Serdar; İçli, SıddıkWe report optical and electrochemical properties of polyether derivatives of perylenediimides (PDIs) thin films formed in various materials (semiconductor, insulator, amorphous and self-assembly). Perylenediimides adsorbed on nanocrystalline TiO2(NT) nanocrystalline alumina (NA), amorphous silicon (PS) and neat self-assemblied (SA) films were prepared and characterized based on spectroscopic, electrochemical, spectro-electrochemical techniques. The absorption and fluorescence spectra of PDIs in chloroform exhibit vibronic features. The fluorescence quantum yields (Uf) of PDIs with end amino substituents in chloroform solutions are over 0.95, while the quantum yield of triethoxyphenyl substituted PDIUfvalue is 0.024 in solution. Optical spectroscopy proves that PDIs in metal oxide thin films form aggregated type complexes. An electrochromism, a color change from red to blue/violet, is observed on metal oxide films, that indicates existence of mono and dianion forms of PDIs. Reversibility of electrochemical reductions in NT film depends on the scanning rate. However, electrochromism in NA films is stable and reversibility is independent from scanning rate. Stable mono and diaionic species are formed on NA films. SA films show broad absorption peaks during the voltammetric scan. On the other hand, the first reduction onset potentials of PDIs are almost equal to the onset potential of capacitive current of TiO2which lead to low efficiency in dye-sensitized solar cells.