Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
Search Results
Correction Citation - Scopus: 1Corrigendum To “hierarchically Porous Polymer Derived Ceramics: a Promising Platform for Multidrug Delivery Systems”[mater. Des. 140(supplement C) (2018) 37–44](Elsevier Ltd., 2018) Ahmetoğlu, Çekdar Vakıf; Zeydanlı, Damla; Özalp, Veli Cengiz; Borsa, Barı Ata; Soraru, Gian DomenicoThe authors regret to inform that The TMTVS ratios for samples were written incorrectly. The true weight ratios for PHMS/LDH/PDMS/TMTVS blends should be as follows: Bio1 = 1/0.055/0.25/0.055, and Bio2 = 1/0.055/1/0.055. The discussion in the study is not affected by this mistype and actually the previous paper [1] cited also in the paper as ref.#44 gives right values for the sample preparation. The authors would like to apologize for the inconvenience caused.Article Citation - WoS: 37Citation - Scopus: 39Polymer-Derived Ceramic Adsorbent for Pollutant Removal From Water(John Wiley and Sons Inc., 2018) Zeydanlı, Damla; Akman, Süleyman; Ahmetoğlu, Çekdar VakıfPolymer-derived ceramic components (SiOC, sample W) were produced from preceramic polymer mixture and a catalyst. After curing and pyrolysis, some of the samples etched by hydrofluoric acid to obtain carbonaceous SiOC (C-rich SiOC, sample W-HF). W and W-HF were tested as an adsorbent material to remove both heavy-metal ions (Cr (III), Pb (III), and Cd (II)) and cationic dyes (Methylene Blue (MB), Rhodamine B (RB), and Crystal Violet (CV)) from aqueous solutions. HF-treated high surface area SiOC samples had quite high adsorption affinity for cationic dyes. According the Langmuir isotherm model the maximum dye uptake values were found to be around to 50 mg/g for sample W, whereas those for sample W-HF ranged from 104 to 186 mg/g. Regeneration studies were conducted both by heat treatment and leaching, high recovery yields (always above 97%) of MB adsorption were obtained.Article Citation - WoS: 50Citation - Scopus: 50Hierarchically Porous Polymer Derived Ceramics: a Promising Platform for Multidrug Delivery Systems(Elsevier Ltd., 2018) Vakıfahmetoğlu, Çekdar; Zeydanlı, Damla; Özalp, Veli Cengiz; Borsa, Barış Ata; Soraru, Gian DomenicoMesoporous silicon oxycarbide (SiOC) components were formed with the use of “molecular spacer” (a sacrificial vinyl-terminated linear siloxane which while decomposing during pyrolysis generates pores with size proportional to the molecular weight), followed by a post-pyrolysis etching treatment by hydrofluoric acid (HF) to obtain C-rich SiOC samples having additional micro-/mesoporosity and specific surface area reaching to 774 m2/g. The biocompatibility of the samples was validated by hemolysis test, and their cargo/drug loading capacities were studied by two different sized polypeptides as model molecules. SiOC particles showed less hemolysis compared to the reference material MCM-41. Similarly, the loading capacity and the release kinetics of bovine serum albumin (BSA) and vancomycin-loaded SiOC particles were improved compared to that of MCM-41. In the multi cargo loading/release capacity tests, done by using different sized molecules, Bio2-HF and MCM-41 were loaded both with fluorescein and BSA. While a lagging time in fluorescein release was observed for MCM-41, the release kinetics of fluorescein and BSA was not affected when they are loaded together in the hierarchical pores of Bio2-HF, allowing the release of both large and small cargo molecules. The antimicrobial activity tests showed that Bio2-HF performed better than MCM-41 particles in improving bactericidal activity.