Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
875 results
Filters
Settings
Search Results
Article Citation - WoS: 3Citation - Scopus: 3A Novel Hybrid Thin Jacketing Method for Seismic Retrofitting of Substandard Reinforced Concrete Columns(Elsevier Ltd, 2025) Narlitepe, Furkan; Kian, Nima; Demir, Ugur; Demir, Cem; Ilki, AlperThis paper introduces a novel hybrid thin jacketing method for seismic strengthening of substandard reinforced concrete (RC) columns for which structural repair mortar along with carbon fiber reinforced polymer (CFRP) and longitudinal steel bars are utilized. The method involves three application phases comprising a) removing the cover concrete, b) re-forming the cover concrete with structural repair mortar just after installing extra longitudinal steel bars c) transverse wrapping of CFRP sheets. The effect of using different types of structural repair mortar and its application process are other test parameters taken into account in this study. To evaluate the efficacy of the proposed method, a comprehensive experimental program was conducted, consisting of six largescale RC column specimens with square and rectangular cross-sections. For all of the specimens tested under a simultaneous constant axial load and reversed cyclic lateral loading, three main properties representing existing substandard RC columns such as a) insufficient transverse reinforcement, b) high axial load ratio (0.75) and, c) relatively high shear force corresponding to moment capacity to shear capacity ratios between 0.60 and 0.80, were considered. The responses of specimens were specified in terms of the lateral load-displacement curves, stiffness variation, ductility ratios, damage progression, and energy dissipation. The experimental results demonstrated that in case the retrofitting method is properly applied, the strengthened columns exhibit satisfactory performance in terms of strength and ductility with a remarkable improvement with respect to the substandard columns. Furthermore, a numerical study was conducted to validate the experimental results by using the OpenSees framework.Article Influence of Fluorine on Structural and Electrical Properties of VO2 Thin Films Deposited by Magnetron Sputtering(Elsevier Ltd, 2025) Akyurek, Bora; Cantas, Ayten; Demirhan, Yasemin; Ozyuzer, Lutfi; Aygun, GulnurThis study investigates whether fluorine-based thermal gel used during electrical measurements of vanadium oxide (VO2) films influences the structural, morphological, or compositional integrity of the films. High-quality VO2 films with a resistance ratio change of about 10(4) for metal-insulator transition were deposited by magnetron sputtering. During electrical characterization, VO2 film was heated from room temperature to similar to 370 K with a fluorine-based thermal gel usage to achieve better heat contact between the film and substrate holder. Structural and chemical properties were assessed through XRD, Raman, XPS, SEM, and energy dispersive spectroscopy imaging. XRD revealed diffraction peaks consistent with monoclinic VO2 confirming that the crystal lattice remains the same although fluorine based thermal gel was used. Raman spectra exhibited vibrational modes indicating that the phonon structure of VO2 was preserved despite fluorine gel usage. XPS results showed only a minor F 1s signal (2.8%) limited only to the film surface. SEM and EDS analyses further confirmed that surface morphology and elemental composition remained belonging to VO2 film. These findings demonstrate that the usage of fluorine-based thermal gel results in only a minimal surface interaction, thereby preserving intrinsic material properties of VO2 and supporting a potential usage for future device fabrication applications.Article Citation - Scopus: 1Assessing the Density of Wood in Heritage Buildings’ Elements Through Expedited Semi-Destructive Techniques(Multidisciplinary Digital Publishing Institute (MDPI), 2025) Henriques, Dulce F.; Sen, Ali Umut; Gomes, Maria da GloriaFeatured Application The research presented and justified in this text aims to provide agents involved in the conservation and refurbishment of old timber elements in buildings with a correlation table for interpreting the readings obtained with penetration resistance testing equipment.Abstract Historically, wood has been among the main materials used in heritage buildings. However, the species and mechanical properties of these elements are often unknown. This uncertainty complicates safety assessment calculations, aggravated by the natural variability of the wood properties. The aim of this work is to assess the density of wooden elements in service using semi-destructive techniques that retain the integrity of structural elements. This research had two phases. First, penetration resistance tests were carried out on laboratory scale on Pinus sylvestris L. wood samples taken from 18th, 19th, and 20th century heritage buildings in Lisbon, Portugal. Later, a field study was carried out on wooden elements from the same buildings, involving needle penetration, core drilling, and moisture content determination tests. The laboratory test results showed a strong correlation between the needle penetration depth and wood density, with an R2 value of 0.76. The results of the field study indicated that the density estimated by the needle penetration test correlated effectively with the measured density of extracted cores after moisture correction, with an R2 of 0.99. In conclusion, the experimental results confirm that penetration resistance and moisture tests are reliable and practical for estimating wood density under in-service conditions.Article Citation - WoS: 4Citation - Scopus: 2Elastic and Anelastic Behavior Associated With Structural Transitions in CsPbBr3(Amer Chemical Soc, 2025) Luo, Pingjing; He, Zhengwang; Yang, Dexin; Aktas, Oktay; Ding, Xiangdong; Zhang, XuefengStrain coupling and relaxation dynamics critically influence the photovoltaic and photoluminescent performances of metal halide perovskites. Here, resonant ultrasound spectroscopy is employed to study the elastic and anelastic properties associated with the octahedral tilting transitions in the optoelectronic semiconductor CsPbBr3 over the temperature range 303-468 K. The cubic-to-tetragonal transition near 405 K is marked by pronounced elastic softening accompanied by a sharp increase in acoustic loss. High anelastic loss below this transition reveals the presence of mobile ferroelastic twin walls that become pinned by lead vacancies at a temperature interval near 380 K in the tetragonal phase. The elastic softening in the cubic phase is strongly correlated to dynamic effects such as the local polar fluctuations. This local disordered effect is further verified by the anomalously high attenuation in the orthorhombic structure, in which the ferroelastic twin walls might become mobile.Article Citation - WoS: 2Citation - Scopus: 2Experimental Integration of Stone Topologies To the Simplified Micro-Modeling for the Seismic Response of Masonry Walls: a Novel Insight(Springer Heidelberg, 2025) Demir, UgurThis study aims to explore the impact of stone typologies on the in-plane seismic behavior of stone masonry buildings. The present study aims to quantify the strength and deformability parameters such as lateral load capacity, ductility, energy dissipation capacity and stiffness degradation of frequently used sandstone and limestone masonry, which will intentionally contribute to the core body of knowledge on their original structural design, seismic safety evaluation and intervention design. The innovative aspect of this research lies in the holistic methodology that integrates field surveys to classify local stone masonry units, experimental characterization of the chemical and mechanical properties of these units to capture variability, and finite element modeling of the in-plane cyclic behavior of stone masonry walls using experimental data. A novel simplified micro-modeling approach is implemented within a standard finite element software, eliminating the need for user-defined subroutines. This approach significantly reduces computational efforts compared to conventional methods, making it particularly suitable for analyzing large-scale stone masonry structures. The study investigates the impact of chemical composition (sandstone or limestone), applied axial stress (0.25 MPa, 0.50 MPa, or 1 MPa), and wall aspect ratios (height-to-length ratios of 1.0 or 1.5) on wall performance. The modeling approach is validated against experimental results from the literature, demonstrating good agreement. Finally, the study assesses wall performance in terms of deformation limits in current seismic codes. The findings provide critical insights for developing innovative design strategies to enhance the structural integrity of stone masonry walls and improve the seismic assessment of existing structures.Article Citation - WoS: 4Citation - Scopus: 2CFD-DEM Investigation of the Effects of Particle Size and Fluidization Regime on Heat Transfer in Fluidized Beds(Springer int Publ Ag, 2025) Alipoor, Mahdi; Kazemi, Saman; Zarghami, Reza; Mostoufi, NavidThis paper presents an in-depth study of heat transfer in fluidized beds, employing the CFD-DEM technique. The primary focus is to examine the impacts of inlet gas velocity, fluidization regime, and particle size on the thermal behavior of fluidized beds. The results revealed that thermal convection predominantly governs heat transfer in fluidized beds, accounting for the largest fraction of the overall heat transfer process. Particle-fluid-particle thermal conduction was found to contribute approximately 10-20% of the heat transfer, whereas particle-particle conduction exhibits a minor role. Upon increasing the inlet gas velocity, the convection rate intensifies, whereas the particle-fluid-particle conduction rate decreases. Furthermore, the study highlights the differences in temperature distribution between turbulent and bubbling fluidized beds. Turbulent bed demonstrated a more uniform and homogenous particle temperature compared to bubbling. At similar fluidization numbers in bubbling beds, increasing particle diameter enhances thermal convection while reducing particle-fluid-particle conduction. In contrast, the turbulent regime shows minimal differences in heat transfer mechanisms when particle size varies. Additionally, smaller particles are found to significantly improve temperature uniformity in fluidized beds. A comprehensive comparison of simulation results with experimental data validates the accuracy of the employed model, reinforcing its ability to predict heat transfer in fluidized beds reliably. This research provides valuable insights into the complex interplay of various mechanisms of heat transfer within fluidized beds, enabling engineers and researchers to optimize bed performance and enhance temperature control in various industrial applications.Article Citation - WoS: 1Citation - Scopus: 1Exploring Sainfoin (Onobrychis Viciifolia) Seed Flour as a Sustainable Plant-Based Food: Germination-Induced Changes in Nutritional Quality, Anti-Nutritional Factors, Phenolic Content, Bioaccessibility, and in Vitro Toxicity(Wiley, 2025) Kaya, Havva Polat; Gungor, Sevde Nur; Tuncel, Nese Yilmaz; Sakarya, Fatma Betul; Andac, Ali Emre; Ozkan, Gulay; Tuncel, Necati BarisBackground and Objectives: Sainfoin is a drought-resistant perennial plant mainly used as animal feed, but its seeds remain underexplored as a food source. This study investigates the effects of germination on the nutritional quality of dehulled sainfoin seeds. Specifically, it examines changes in proximate composition, antinutrients (hydrocyanic acid, tannins, phytates, saponins, and trypsin inhibitors), in vitro starch digestibility, phenolic content, antioxidant capacity, and cytotoxicity. Findings: Germination significantly increased crude protein (up to 45%) and fat (up to 10%) contents. Despite low total starch (similar to 7%), 45-h germination reduced total digestible starch while increasing rapidly digestible starch. Antinutrient levels decreased significantly-tannins by 57%, phytates by 30%, saponins by 40%, and trypsin inhibitors by 29%-with the exception of hydrocyanic acid. Although total phenolics, flavonoids, and antioxidant capacity declined, their bioaccessibility improved. No cytotoxic effects were observed in either raw or germinated seeds. Conclusions: Germination improved the nutritional profile of sainfoin seeds by increasing protein and fat contents, while reducing most antinutrients. Despite a decrease in antioxidant levels, their bioaccessibility was enhanched. The absence of cytotoxic effects further supports the potential application of germinated sainfoin seeds in human nutrition. Significance and Novelty: Although few studies have focused on the green form of sainfoin, which is commonly used as livestock feed, this study reveals that sainfoin seeds offer substantial potential as food, with germination emerging as a simple and effective approach to improving their nutritional properties.Article Nanostructured Ox-MWCNT-Ppy-Au Electrochemical Sensor for Ultralow Detection of Retrorsine and Evaluation of Its Cytotoxic Effects on Liver Cells(Taylor & Francis Ltd, 2025) Akturk, Ezgi Zekiye; Njjar, Muath; Ata, Melek Tunc; Kaya, Ahmet; Akdogan, Abdullah; Onac, CananThis study presents the development of a novel retrorsine (RTS)-imprinted sensor utilizing oxidized multi-walled carbon nanotubes (Ox-MWCNTs), polypyrrole (PPy), and gold nanoparticles (AuNPs), employing square wave voltammetry for the sensitive and selective detection of RTS which causes oxidative-stress and DNA damage. The fabricated Ox-MWCNT-PPy-AuNP sensor demonstrated a surface-area of (0.218 cm2) is 4.25 times larger than a bare glassy carbon electrode, with a low charge transfer resistance (10.9 Omega), enhancing electron transfer kinetics. The sensor showed excellent sensitivity in detecting retrorsine, with a limit of detection of 0.035 nM in synthetic matrices and -0.030 nM in HepaRG cell culture medium. Toxicity assays in HepaRG cells revealed dose-dependent oxidative-stress, with glutathione levels decreasing from 23.08 +/- 0.21 mu mol/109 to 21.21 +/- 0.02 mu mol/109 at 35 mu M retrorsine. Concurrently, GSSG levels increased from 1.32 +/- 0.26 mu mol/109 to 2.22 +/- 0.02 mu mol/109. DNA-damage assessed via comet assay, showed significant increases in tail-moment (2.53 mu m) and tail-migration (16.13 mu m). Oxidative DNA-damage, indicated by 8-OHdG levels, increased significantly from 0.29 +/- 0.02 ng.mL- (control) to 0.47 +/- 0.07 ng.mL- at 35 mu M retrorsine. These findings demonstrate the sensor's effectiveness for retrorsine detection and its applicability in toxicological studies. The integration of nanomaterial engineering and molecular imprinting provides a highly sensitive, selective, and eco-friendly solution for monitoring toxic agents and assessing their biological impacts.Article In-Depth Analysis of Drought Trend in Semiarid Saïs Plateau and Middle Atlas Region in Morocco(Springer int Publ Ag, 2025) Qadem, Zohair; Tayfur, Gokmen; Kankal, MuratThis study explores the spatiotemporal properties of droughts and their evolution in the semiarid Sa & iuml;s Plateau and the Middle Atlas regions in Morocco. The methodology includes the analysis of 36 years of precipitation data recorded at 16 meteorological stations, the use of the standardized precipitation index (SPI) at different temporal scales of short term (1 and 3 months), medium term (6 months), and long term (12 and 24 months) to capture historical droughts, and the application of the Mann-Kendall test to assess the drought trends. The wet and dry periods in the Sa & iuml;s Plateau and Middle Atlas regions are almost evenly distributed, with 65% in the "near-normal" condition. The "extremely dry" period, with a value of 1%, was lower than the "extremely humid" period (1.65%). There is no topographically and climatically significant difference between the Sa & iuml;s Plateau and the Middle Atlas in terms of droughts, which are found to decrease over time in both regions. The results of Mann-Kendall test reveal that the short-term trends are generally positive, except at the Boulemane station (- 0.06 for SPI-1, - 0.13 for SPI-3). The long-term precipitation increases in the Middle Atlas region, particularly at the Ait Khabach (0.33 for SPI-24) and the Imouzzer (0.36 for SPI-24) stations. On the Sa & iuml;s Plateau, the trends are positive at the stations of Fez City (0.16 for SPI-24) and Dar Elarsa (0.27 for SPI-24). Significant trends are more pronounced at longer time scales.Article Projectivity and Quasi-Projectivity With Respect To Epimorphisms To Simple Modules(World Scientific Publ Co Pte Ltd, 2025) Alagoz, Yusuf; Alizade, Rafail; Buyukasik, EnginUsing the notion of relative max-projectivity, max-projectivity domain of a module is investigated. Such a domain includes the class of all modules whose maximal submodules are direct summands (this class denoted as MDMod -R). We call a module max-p-poor if its max-projectivity domain is exactly the class MDMod -R. We establish the existence of max-p-poor modules over any ring. Furthermore, we study commutative rings whose simple modules are projective or max-p-poor. Additionally, we determine the right Noetherian rings for which all right modules are projective or p-poor. Max-p-poor abelian groups are fully characterized and shown to coincide precisely with p-poor abelian groups. We also further investigate modules that are max-projective relative to themselves, which are known as simple-quasi-projective modules. Several properties of these modules are provided, and the structure of certain classes of simple-quasi-projective modules is determined over specific commutative rings including the ring of integers and valuation domains.