Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
11 results
Search Results
Article Citation - WoS: 9Citation - Scopus: 9High Voltage Response of Graphene/4h-sic Uv Photodetector With Low Level Detection(Elsevier, 2023) Jehad, Ala K.; Ünverdi, Özhan; Çelebi, CemA self-powered graphene/silicon carbide (G/4H-SiC) ultraviolet photodetector of a p-i-n like-structure with high voltage response has been fabricated to detect and measure low intensity ultraviolet (UV) radiation. Bilayer graphene sheet grown by chemical vapor deposition (CVD) method was transferred on the top of an epilayer structure of n-/n+ 4 H-SiC. In this structure, two Schottky contacts were formed: one at G/ n- 4H-SiC interface and the other at bulk-4 H-SiC/Cr/Au interface. The photodetector's characteristic measurements revealed low dark current of - 0.58 nA and spectral voltage responsivity of - 0.75 V/W at 300 nm wavelength. Under low level UV illumination of 300 nm wavelength, the photodetector exhibited a leakage current and a photogenerated response voltage of 1.1 nA and 10 mV, respectively. The time-dependent photovoltage measurements displayed a rapid photovoltage response with rise and decay times of -74 ns and - 580 ns, respectively. This novel device holds promise for applications requiring sensitive and self-powered UV detection.Article Citation - WoS: 35Citation - Scopus: 35Cvd Graphene/Sic Uv Photodetector With Enhanced Spectral Responsivity and Response Speed(Elsevier, 2023) Jehad, Ala K.; Fidan, Mehmet; Ünverdi, Özhan; Çelebi, CemA self-powered, high-performance graphene/Silicon Carbide (G/4H-SiC) ultraviolet Schottky junction photodetector has been fabricated, and the effect of using monolayer and bilayer graphene on the device performance parameters was investigated. P-type graphene sheets were grown by the chemical vapor deposition (CVD) method, while 4H-SiC material consists of an epilayer structure of n-/n+ on bulk n-SiC. Two photodetector devices have been studied, one with monolayer graphene (MLG) and the other with bilayer graphene (BLG). The proposed photodetector structure reveals the highest spectral responsivity known of a G/4H-SiC UV photodetector so far. Electronic and optoelectronic characterizations were done under an ultraviolet wavelength range from 240 to 350 nm. The results show two spectral responsivity maxima (Rmax) at 285 nm and 300 nm wavelengths. Exhibiting two maxima in spectral responsivity and detectivity is caused by the constructive and destructive interference effects of multiple reflections at the SiC epilayer's interfaces. The photodetector devices exhibit high spectral responsivity (R ? 0.09 AW?1), maximum detectivity (D* ? 2.9 × 1012 Jones), and minimum noise equivalent power (NEP ? 0.17 pWHz-1/2) in both devices. Using bilayer graphene instead of monolayer showed no significant change in both the photogenerated current and the spectral responsivity due to the higher absorption coefficient of bilayer graphene, however, it exhibited a significant improvement in the response speed. The response speed was found to increase by 50 % when bilayer graphene was used as a hole collecting electrode in the G/4H-SiC junction. This is because bilayer graphene creates a narrower depletion layer and higher electric field, which promotes efficient charge separation and recombination. © 2023 Elsevier B.V.Article Citation - WoS: 7Citation - Scopus: 7Insights Into Sustainability of Engineered Carbonaceous Material-Based Technologies for Advanced Cyanide Removal From Wastewater(Elsevier, 2023) Yoon, Yeojoon; Khataee, Alireza; Gören, Ayşegül Yağmur; Recepoğlu, Yaşar KemalCyanide (CN) is a serious concern in industrial and goldmine wastewater. Strict regula-tory standards have been established by various agencies due to the detrimental effects that CN has on human health. Therefore, before discharge to water bodies or land, it is essential to create a sus-tainable model for the safe removal of CN. Carbon-based materials are well known for their adsorption and oxidation features, which can be conducive to CN removal. This paper reviews the relevant literature on the application of modified and unmodified carbon-based materials to CN removal in water; these materials include activated carbon (AC), graphene, graphene oxide (GO), and carbon nanotubes (CNTs). Moreover, CN removal mechanisms and photocatalytic removal of CN are comprehensively discussed, with a particular emphasis on modifying carbon-based materials. It has been observed that adding various elements to carbon-based materials improves their surface area, functional groups, CN adsorption capacity, and pore volume. Impacts of operational parameters, isotherm models, kinetics, and types of carbon-based materials are also outlined. This study provides insight into the real-scale applicability of carbon-based materials for CN removal from waters. Moreover, this review indicates that essential work on CN removal using carbon-based materials is still needed. Future research should focus on developing modified carbon-based materials to encourage multidisciplinary research. The most crucial gap in the literature is that the studies have been performed on a lab scale. Therefore, further pilot and real-scale applica-tions should be conducted. Overall, the cost assessment, environmental effects, and human health risks of carbon-based materials should be studied in future research to achieve a realistic perspective on applicability on an industrial scale.(c) 2023 THE AUTHORS. Published by Elsevier BV on behalf of Faculty of Engineering, Alexandria University This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/ licenses/by-nc-nd/4.0/).Article Citation - WoS: 5Citation - Scopus: 5Self-Powered Photodetector Array Based on Individual Graphene Electrode and Silicon-On Integration(Elsevier, 2023) Yanılmaz, Alper; Ünverdi, Özhan; Çelebi, CemOne of the key limitations for the device performance of the silicon (Si) based photodetector arrays is the optical crosstalk effect encountered between photoactive elements as well. The scope of this work is to reduce optical crosstalk and thus increasing the device performances with graphene and Si integration. This paper presents the design, fabrication process, and performance evaluation of self-powered individual Graphene/Silicon on Insulator (GSOI) based Schottky barrier photodiode array (PDA) devices. A 4-element GSOI Schottky barrier PDA with separate graphene electrodes is fabricated to examine possible optical crosstalk encountered between each diode in the array structure. Here, monolayer graphene is utilized as hole collecting separate electrode on individually arrayed n-type Si on SOI substrate by photolithography technique. Each diode in the array exhibited a clear rectifying Schottky character. Photoresponse characterizations revealed that all diodes had excellent device performance even in self-powered mode in terms of an Ilight/Idark ratio up to 104, a responsivity of ∼0.12 A/W, a specific detectivity of around 1.6 × 1012 Jones, and a response speed of ∼1.32 μs at 660 nm wavelength. As revealed by optical crosstalk measurement, the device with pixel pitch of 1.5 mm had a total crosstalk of about 0.10% (−60 dB) per array. These results showed that the optical crosstalk between neighboring n-Si elements can be greatly minimized when graphene is used as separated electrode on arrayed Si on SOI substrate. Our study is expected give an insight into the performance characteristics of GSOI PDA devices which have great potential to be used in many technological applications such as multi-wavelength light measurement, level metering, high-speed photometry and position/motion detection. © 2023 Elsevier B.V.Article Citation - WoS: 1Citation - Scopus: 1A Multi-Layered Graphene Based Gas Sensor Platform for Discrimination of Volatile Organic Compounds Via Differential Intercalation(Royal Society of Chemistry, 2023) Özkendir İnanç, Dilce; Ng, Zhi Kai; Başkurt, Mehmet; Keleş, Berfin; Vardar, Gökay; Şahin, Hasan; Tsang, Siu Hon; Palaniappan, Alagappan; Yıldız, Ümit Hakan; Teo, EhtSelective and sensitive detection of volatile organic compounds (VOCs) is of critical importance for environmental monitoring, disease diagnosis and industrial applications. Among VOCs, assay development for primary alcohols has captured significant research attention since their toxicity causes adverse effects on gastrointestinal and central nerve systems, resulting in irreversible blindness, and coma, and can be even fatal at high exposure levels. However, selective detection of primary alcohols is extremely challenging owing to the similarity in their molecular structure and characteristic groups. Herein, we have attempted to investigate the differential methanol (MeOH)-ethanol (EtOH) discriminative properties of single-layer, bi-layer, and multi-layer graphene morphologies. Chemiresistors fabricated using the three morphologies of graphene illustrate discriminative MeOH-EtOH responses, which is attributed to the phenomenon of differential intercalation of MeOH within layered graphene morphologies as compared to that of EtOH. This hypothesis is verified by density functional theory calculations, which revealed that the adsorption of EtOH molecules on the graphene surface is more energetically favorable as compared to that of MeOH molecules, thereby inhibiting their intercalation within the layered graphene morphologies. It is further evaluated that the degree of MeOH intercalation increases with increasing layers of graphene for obtaining differential MeOH-EtOH responses. Experimental results suggest possibilities to develop selective and sensitive MeOH assays fabricated using various graphene morphologies in a combinatorial sensor array format.Article Citation - WoS: 14Citation - Scopus: 12Photocatalytic Hydrogen Energy Evolution From Sugar Beet Wastewater(Wiley-VCH Verlag, 2021) Orak, Ceren; Yüksel, AslıHydrogen is a clean, environmentally friendly, storable, and sustainable green energy source as well as a potential fuel. It could be produced from various biomass, wastewater, or other sources by different processes. In this study, hydrogen was evolved from sucrose model solution and real sugar beet wastewater by photocatalytic oxidation using a perovskite catalyst under solar light irradiation. In this context, firstly, the graphene supported LaFeO3 (GLFO) was synthesized and then, a characterization study shows that GLFO is successfully synthesized. To optimize the reaction parameters (pH, catalyst loading, and initial hydrogen peroxide concentration), an experimental matrix was created using the Box Behnken model. Whereas the highest hydrogen evolution from sucrose model solution was observed as 3520 μmol/gcat, the highest hydrogen evolution from sugar beet wastewater was obtained as 7035 μmol/gcat. The highest TOC removal (99.73 %) from sugar beet wastewater was also achieved at the same reaction conditions.Article Citation - WoS: 1Citation - Scopus: 1Substrate Effects on Electrical Parameters of Dirac Fermions in Graphene(Elsevier, 2021) Tıraş, Engin; Ardalı, Şükrü; Fırat, Hakan Asaf; Arslan, Engin; Özbay, EkmelThe substrate effects on the electronic transport properties of single-layer graphene on TiO2/Si substrate have been studied. The Hall mobility, sheet carrier density, and transport lifetime were obtained from the temperature-dependent Hall measurements, while the in-plane effective mass, quantum lifetime was obtained from the temperature-dependent variation of the Shubnikov de Haas (SdH) oscillations that were made at 1.8 to 45 K temperature range and up to the magnetic field of 11 T. The measurement results showed that in SLG/TiO2/ Si sample, there were 2.36 +/- 0.12x1016 m-3 amounts of 3D carriers coming from the substrate. In our previous studies, 3D carrier densities were measured as 6.07x1016 m-3 and zero for SLG/SiO2/Si and SLG/SiC sample, respectively. This result shows that the 3D carriers formed in the structure are significantly changed by a substrate. The scattering mechanisms were determined using the zt/zq ratio. The ratio values obtained as 3.66. This value obtained was compared with the values we found for SLG/SiC (zt/zq=1.36) sample and SLG/TiO2/Si (zt/zq=3.08) sample our previous study. The results show that small-angle scattering is dominant in SLG/SiC sample, but large-angle scattering is dominant in SLG/SiO2/Si and SLG/TiO2/Si samples. The charged impurity scattering is the dominant scattering mechanism in SLG/TiO2/Si and SLG/SiO2/Si samples, whereas in SLG/SiC samples, a short-range scattering mechanism such as lattice defects can be said to affect the electronic transport.Article Citation - WoS: 12Citation - Scopus: 17Junction Area Dependent Performance of Graphene/Silicon Based Self-Powered Schottky Photodiodes(Elsevier, 2021) Fidan, Mehmet; Ünverdi, Özhan; Çelebi, CemThis work reports the impact of junction area on the device performance parameters of Graphene/n-Silicon (Gr/n-Si) based Schottky photodiodes. Herein, three batches of Gr/n-Si photodiode samples were produced based on various sized CVD grown monolayer graphene layers transferred on individual n-Si substrates. The fabricated devices exhibited strong Schottky diode character and had high spectral sensi-tivity at 905 nm peak wavelength. The optoelectronic measurements showed that the spectral response of Gr/n-Si Schottky photodiodes has a linear dependence on the active junction area. The sample with 20 mm(2) junction area reached a spectral response of 0.76 AW(-1), which is the highest value reported in the literature for self-powered Gr/n-Si Schottky photodiodes without the modification of graphene electrode. In contrast to their spectral responsivities, the response speed of the samples were found to be lowered as a function of the junction area. The experimental results demonstrated that the device performance of Gr/n-Si Schottky photodiodes can be modified simply by changing the size of the graphene electrode on n-Si without need of external doping of graphene layer or engineering Gr/n-Si interface. This study may serve towards the standardization of junction area for the development of high performance Gr/Si based optoelectronic devices such as solar cells and photodetectors operating in between the ultraviolet and near-infrared spectral region. (C) 2021 Elsevier B.V. All rights reserved.Article Citation - WoS: 21Citation - Scopus: 21Graphene-Supported Lafeo3 for Photocatalytic Hydrogen Energy Production(Wiley, 2021) Orak, Ceren; Yüksel, AslıHydrogen is a green, environmentally benign and sustainable energy source with no harmful combustion products to fulfil the increasing energy demand. Photocatalytic oxidation has various advantageous to produce hydrogen from different sources such as wastewater, alcohol solutions using different types of catalysts. Sucrose solution was chosen as a model solution to evolve hydrogen using LFO and GLFO catalysts under solar light irradiation, and graphene was used as a catalyst support to enhance the amount of produced hydrogen amount. A characterization study, which consists of SEM-EDX, BET, XRD, PL, TEM, XPS and FT-IR analyses, was carried out. A full factorial design was created via Minitab 18 to analyse the factors affecting the produced hydrogen amount, which are pH, catalyst loading, H2O2 concentration and graphene content statistically. Based on the results, graphene content is an important parameter and pH and H2O2 concentration have a synergetic effect over hydrogen production. Additionally, the effects of calcination temperature, pH, H2O2 concentration and catalyst loading over produced gases were investigated. The best promising result was obtained as 3388 mu mol/g(cat) at the following reaction conditions: 7.5 of pH, 0.1 g L-1 catalyst loading (GLFO, which is calcined at 700 degrees C) and using 15 mM H2O2 under solar light irradiation. Novelty Statement Hydrogen is produced from sucrose solution with low cost process requiring no special equipment, high pressure or temperature. First study that uses perovskite catalysts for the production of hydrogen from sucrose solution by photo-Fenton like oxidation GLFO is a promising photocatalyst for H-2 production by solar-Fenton like oxidation with the highest H-2 evaluation at 3388.34 mu mol/g(cat).Article Citation - WoS: 6Citation - Scopus: 6Adsorbate-Induced Enhancement of the Spectral Response in Graphene/Silicon-based Schottky Barrier Photodetectors(Springer Verlag, 2020) Sahan, N.; Fidan, Mehmet; Çelebi, CemThe impact of atmospheric adsorbates on the spectral response and response speed of p-type graphene/n-type Silicon (p-Gr/n-Si) based Schottky barrier photodetectors are investigated. Wavelength resolved photocurrent and transient photocurrent spectroscopy measurements conducted under high-vacuum conditions revealed that the atmospheric adsorbates such as O-2 and H2O stuck on graphene electrode lead to hole doping in graphene and therefore shift its Fermi level towards higher energy states below its Dirac point. Such a shift in graphene's Fermi level due to adsorbates increases the zero-bias Schottky barrier height of the p-Gr/n-Si heterojunction from 0.71 to 0.78 eV. Adsorbate induced increment in the barrier height promotes the separation of photo-generated charge carriers at the depletion region and leads to an improvement in the maximum spectral response (e.g., from 0.39 to 0.46 AW(-1)) and response speed of the p-Gr/n-Si photodetector in the near-infrared region. The experimentally obtained results are expected to give an insight into the adsorbate related variations in the rectification and photo-response characters of the heterojunctions of graphene and other 2D materials with different semiconductors.