Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
15 results
Search Results
Article Citation - Scopus: 3Evaluation of Gis-Based Spatial Interpolation Methods for Groundwater Level: a Case Study of Türkiye(Tubitak Scientific & Technological Research Council Turkey, 2024) Kırçiçek, Nilüfer Tirol; Baba, Alper; Koçbay, Ayhan; Toklu, Murat MertGroundwater is a valuable and universally distributed resource on Earth. Understanding the spatial and temporal dynamics of groundwater is of utmost importance for effective management. Normally, groundwater levels are recorded at arbitrary points, but groundwater modeling requires interpolating the measured values at specific grid nodes. This study aims to dentify and evaluate the geographical variations of groundwater levels in Türkiye using three geostatistical interpolation techniques. Data from 355 groundwater wells from 1970 to 2019 were used for this purpose. In addition, an investigation of changes in annual average temperature and precipitation was conducted for two different time periods: 1985–2000 and 2001–2016. The results show an increase in the annual average temperature in Türkiye by 0.82 °C during the reference period (1985–2000). Despite regional differences in the precipitation regime, the average annual precipitation in Türkiye has not changed significantly overall. Especially in the Meriç-Ergene, Konya Closed (Konya Kapalı), and Euphrates-Tigris basins, a significant decrease in groundwater levels was observed, even though this decrease is less than 100 m in some wells. After a comprehensive analysis of all these data, possible explanations for the changes in groundwater levels were considered.Article Citation - WoS: 4Citation - Scopus: 3Assessment of Soil Erosion and Sediment Delivery Ratio in the Arghandab Catchment, Kandahar Province, Afghanistan by Using Gis-Based Rusle Method(Taylor & Francis Ltd, 2024) Ansari, Ahmad; Tayfur, Gokmen; Mohammadi, ShahinA significant proportion of Arghandab Catchment in Kandahar Province, Afghanistan has been under potential degradation threat due to soil erosion. This study assessed the extent of soil erosion and estimated the sediment delivery ratio (SDR) in the catchment by employing the Revised Universal Soil Loss Equation (RUSLE), utilizing the Geographic Information System (GIS) and the Remote Sensing (RS) techniques. Data, related to rainfall erosivity (R factor), soil erodibility (K factor), slope length and steepness (LS factor), cover management (C factor), and support practices (P factor), employed for the RUSLE model were processed using the GIS tools and R-Studio software. Average RUSLE factor values estimated in the studied area ranged from 51.8 to 124 MJ mm ha-1 h-1 year-1, 0.03725 t ha h ha-1 MJ-1 mm-1, 9.2, 0.445, and 0.75 for R, K, LS, C, and P factors, respectively. The results revealed that the average annual soil loss from the catchment was 6.81 t ha-1 yr-1, ranging from 0.002 t ha-1 yr-1 in the flat areas up to 94.7 t ha-1 yr-1 in the hilly and mountainous regions. Soil classes of slight, moderate, high, very high, severe, and very severe covered areas of 20.1% (263,542.3 ha), 12.2% (160,286.5 ha), 22.8% (298,740.6 ha), 20.3% (265,546.8 ha), 17.6% (231,224.4 ha) and 6.9% (90,879.9 ha), respectively. The computed SDR for Dahla Reservoir located in the catchment was found to be in between 24.2% and 36%. LS factor was identified as the most crucial variable associated with soil erosion. The findings from this study can be applied when designing effective conservation strategies in the management of erosion and water management.Article Citation - WoS: 13Citation - Scopus: 17Convenient Site Selection of a Floating Pv Power Plant in Türkiye by Using Gis-Fuzzy Analytical Hierarchy Process(Springer Heidelberg, 2024) Karipoglu, Fatih; Koca, Kemal; Ilbahar, EsraFloating photovoltaics (FPVs) are appearing as a promising and an alternative renewable energy opinion in which PV panels are mounted on floating platforms in order to produce electricity from renewable energy on water such as seas, dams, rivers, oceans, canals, fish farms, and reservoirs. So far, such studies related to the body knowledge on financial, technical, and environmental aspects of installation of FPV have not been performed in Turkey while expanding steadily in other countries. In this study, suitable site selection for installation of FPV power plants on three lakes in Turkey was studied by performing geographic information system (GIS) and the fuzzy analytic hierarchy process (FAHP) as multi-criteria decision-making (MCDM) method. This detailed study revealed that the criterion of global horizontal irradiance (GHI) was determined as the most crucial criterion for the installation of FPV on Beysehir Lake, Lake of Tuz, and Van Lake. Additionally, it was clearly seen that the Beysehir Lake had the highest value approximately 52% among other lakes for installation, that is why Beysehir Lake is selected as the best option for installation of an FPV system with this multi-criteria approach.Article Citation - WoS: 16Citation - Scopus: 19Comparative Analysis of Estimation of Slope-Length Gradient (ls) Factor for Entire Afghanistan(Taylor & Francis, 2023) Ansari, Ahmad; Tayfur, GökmenSlope length gradient (LS) is one of the crucial factors in the Universal Soil Loss Equations (USLE, RUSLE). This study aimed at estimating the slope-length and slope-steepness (LS) factor for the entire watersheds of Afghanistan by using three different methods, namely; (1) LS-TOOLMFD (Method 1); (2) The Method of Equations (Method 2); and (3) The approach of Moore and Burch (Method 3). The first method uses the digital elevation model (DEM) in the ASCII format, and the other two methods use the DEM in the spatial domain. The results show that the LS-factor of the study area ranges from 0.01 to 44.31, with a mean of 5.24 and standard deviation of 6.95, according to Method 1; 0.03 to 163.49, with a mean of 9.6 and standard deviation of 13.58, according to Method 2; and 0 to 3985, with a mean of 7.16 and standard deviation of 29.7, according to Method 3. The study reveals that Methods 1 and 2 are more appropriate than Method 3 because Method 3 yields high LS-factor values close to or at streamlines located near mountainous regions. The highest LS values are found to be in the northeast, north, and central regions of Afghanistan, which is consistent with the high mountains and deep valley geomorphology, indicating that these regions are particularly vulnerable to soil erosion by rainfall-runoff processes. The sediment delivery ratio (SDR) for the Upper-Helmand River Basin (Upper-HRB) is also estimated by the RUSLE, employing the LS factors produced by the three methods. The results revealed that the average annual soil loss is found to be, respectively, 9.3, 18.2, and 11.1 (ton/ha/year) by using the three methods, corresponding to SDR of 23.5%, 12.1%, and 19.9%.Article Citation - WoS: 5Citation - Scopus: 5Are Soil and Geology Characteristics Considered in Urban Planning? an Empirical Study in Izmir (turkiye)(MDPI, 2023) Salata, Stefano; Uzelli, TaygunIt is well acknowledged that sustainable soil management can play a crucial role in reducing the vulnerability of urban areas, but are soil characteristics properly evaluated in the decision-making process concerning urbanization? Within this work, we conducted an analysis of the land-use change trends in the city of Izmir (Turkey). We made an extended and detailed analysis of the urbanization processes between 2012 and 2018 in a geographic information system environment (Esri ArcGIS 10.8.1 and ArcGIS Pro 3.0). Then, we superimposed by spatial overlay different soil characteristics: land capability, hydraulic conductibility, soil groups, and fault lines. We discovered that although there is a joint agreement on soil and its geological importance in reducing urban vulnerabilities to flooding, urban heat islands, agricultural production, or earthquakes, there is scarce knowledge of its characteristics to inform land-use planning. This work sheds some light on how newly developed areas are planned without proper consideration of soil properties, following a fuzzy and irrational logic in their distribution. Results encourage the utilization and inclusion of soil knowledge to support the decision-making process concerning urban transformation to achieve more resilient and less vulnerable urban systems.Article Citation - WoS: 7Citation - Scopus: 8Integrating Building and Context Information for Automated Zoning Code Checking: a Review(International Council for Research and Innovation in Building and Construction, 2022) Demir Altıntaş, Yelin; İlal, Mustafa EmreInteroperability approaches have attracted much attention in the AEC/FM industry with the increased interest in Building Information Modeling (BIM) studies since 2000's. Especially, the integration of BIM with GIS is crucial for areas, which need detailed information on buildings and their surroundings. Automated code compliance checking against zoning codes is an area that requires both zoning data and building design data. In an ideal automated zoning code checking process, building codes should be retrieved from the responsible authority, data regarding the neighborhood the project is located in should be retrieved directly from the local municipality's GIS, and the building project should be supplied by the designer as a BIM file. The checking process should be able to work with a combination of GIS and BIM data and generate a compliance report. Although recent BIM-GIS integration efforts have been successful in some areas, BIM-GIS integration studies in the context of automated zoning code compliance checking are limited, and the data interoperability problem in this field still needs to be addressed. This paper intends to (1) provide a critical review and analysis of the current BIM and GIS integration studies for building permit processes, (2) present the opportunities that the implementation of integrating BIM and GIS might bring to the automated zoning compliance checking domain and (3) identify promising integration approaches for future efforts.Article Citation - WoS: 16Citation - Scopus: 17Integrating Ecosystem Vulnerability in the Environmental Regulation Plan of Izmir (turkey)-What Are the Limits and Potentialities?(MDPI, 2022) Salata, Stefano; Özkavaf Şenalp, Sıla; Velibeyoğlu, KorayThe land-use regulatory framework in Turkey is composed of several hierarchical plans. The Environmental Regulation Plan pursues comprehensive planning management, which ranges between 1/100,000 and 1/25,000 and defines the framework for local master plans. Unfortunately, there is scarce knowledge of how these plans effectively protect the environment. Besides, these plans have poor consideration of socio-economic dynamics and the ecosystem vulnerability, while evaluating the actual conflicts or synergies within the localization of ecological conservation and settlement expansion areas. In this work, an ecosystem-based geodatabase was created for the western Izmir area (Turkey). The dataset has been created by employing a supervised classification sampling of Sentinel-2 images acquired on 28 March 2021, while accessing ONDA-DIAS services to L2C products. Then, the InVEST software was used to map the Habitat Quality and the Habitat Decay, while the ArcMap raster analysis tool was employed to generate the Normalized Difference Vegetation Index. The results were used to classify the ecosystem vulnerability of the western metropolitan area of Izmir and then superimposed to the Environmental Regulation Plan of the city of Izmir (2021), thus evaluating synergies and conflicts. Although integration of the ecosystem services approach into spatial planning is lacking in the planning practice of Turkey, the paper provides an operative methodology to integrate ecosystem evaluation in environmental planning as a basic strategy to support sustainable development.Conference Object Citation - Scopus: 11Wind-Solar Site Selection Using a Gis-Mcdm Approach With an Application in Kayseri Province/Turkey(Institute of Electrical and Electronics Engineers Inc., 2021) Genç, Mustafa Serdar; Karipoğlu, FatihRenewable and sustainable energy sources such as wind, biomass, geothermal and solar are defined as a less harmfully to environment than other fossil fuels reserves. At the last decade, the demand of energy because of the rising of industrialization and population is increasing in Turkey. Thus, investments on renewable energy sources especially wind and solar energy systems are increasing rapidly because of unlicensed energy production legislation published by Turkish Ministry of Energy and Natural Sources. Although Turkey has high solar and wind capacity, there has not been develop a tool to determine the suitable regions for hybrid energy systems. In this study, geographical information systems (GIS) and Multi-criteria-base method (MCDM) are used to determine the suitable regions for wind-solar hybrid energy systems of Kayseri Province under potential and environmental impacts. The results shows (2.080 km2) %12.3 of Kayseri is suitable for hybrid energy system investment. © 2021 IEEE.Article Citation - Scopus: 40Determination of the Most Appropriate Site Selection of Wind Power Plants Based Geographic Information System and Multi-Criteria Decision-Making Approach in Develi, Turkey(Aalborg University Press, 2021) Karipoğlu, Fatih; Genç, Mustafa Serdar; Koca, KemalWind power has major benefits including providing for an increasing energy demand while tackling climate change problems. Detailed planning processes such as technical, social, environmental, various agents, and political concerns are essential for the development of wind energy projects. The objective of the present study is to develop a visualization that combines Geographic Information System (GIS) and Multi-Criteria Decision Making (MCDM) and implementation for Kayseri, Develi in Turkey as a case study. For the analyzes, CORINE CLC 2000 and other data sources were employed for data acquisition to unlock fragmented and hidden onshore data resources and to facilitate investment in sustainable coastal and inland activities. Several factors were determined in the wind power plant installations such as wind potential, roads, water sources, and these factors were analyzed based on their buffer zones. After detailed analyses, sites near the Havadan (7.87 MW) and Kulpak (9.22 MW) villages were found to be the most suitable locations for the installation of a potential onshore wind farm. The method suggested in this study can be used to analyze the suitability of any region at the regional level for onshore wind power plant and the results of the study can be used to develop based on public perception, renewable energy policies, energy political rules. © 2021, Aalborg University press. All rights reserved.Conference Object Citation - Scopus: 60Evaluation of Gis and Bim Roles for the Information Management of Historical Buildings(Copernicus GmbH, 2013) Saygı, Gamze; Agugiaro, G.; Turan, Mine; Remondino, F.An architectural heritage object carries heterogeneous and multi-layered information beyond physical characteristics. It requires an integrated representation of various types of information for understanding and management prior to the decision-making process of conservation. This requirement is a twofold manner consisting of representation and management processes. There exists a variety of approaches for representation of heritage objects in digital three-dimensional (3D) environment, but the selection of the appropriate one according to the needs is crucial. On one hand, there have been recently great attempts to adopt Building Information Modeling (BIM) for historical buildings. Nevertheless, the related works in the topic focus mainly on pre-processing of data, such as the integration of born-digital material into a BIM environment and the creation of parametric objects according to historical building characteristics. As the information management of a historical building requires enhanced attribute management and integration of different datasets, further investigation on the BIM capabilities in management terms is crucial. On the other hand, Geographical Information Systems (GIS) have great potentials in exploring spatial relationships, but their potential in 3D representation is still somehow limited. The paper reviews and evaluates the roles of BIM and GIS, highlighting their advantages and disadvantages for integration, retrieval and management of heterogeneous data in the context of historical buildings. © 2013 Copernicus. All rights reserved.