Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
21 results
Search Results
Article Citation - WoS: 17Citation - Scopus: 16Development of Cissus Quadrangularis-Loaded Poss-Reinforced Chitosan-Based Bilayer Sponges for Wound Healing Applications: Drug Release and in Vitro Bioactivity(American Chemical Society, 2023) Değer Aker, Sibel; Tamburacı, Sedef; Tıhmınlıoğlu, FundaNowadays, antibiotic-loaded biomaterials have been widelyusedin wound healing applications. However, the use of natural extractshas come into prominence as an alternative to these antimicrobialagents in the recent period. Among natural sources, Cissus quadrangularis (CQ) herbal extract is usedfor treatment of bone and skin diseases in ayurvedic medicine dueto its antibacterial and anti-inflammatory effects. In this study,chitosan-based bilayer wound dressings were fabricated with electrospinningand freeze-drying techniques. CQ extract-loaded chitosan nanofiberswere coated on chitosan/POSS nanocomposite sponges using an electrospinningmethod. The bilayer sponge is designed to treat exudate wounds whilemimicking the layered structure of skin tissue. Bilayer wound dressingswere investigated with regard to the morphology and physical and mechanicalproperties. In addition, CQ release from bilayer wound dressings and in vitro bioactivity studies were performed to determinethe effect of POSS nanoparticles and CQ extract loading on NIH/3T3and HS2 cells. The morphology of nanofibers was investigated withSEM analysis. Physical characteristics of bilayer wound dressingswere determined with FT-IR analysis, swelling study, open porositydetermination, and mechanical test. The antimicrobial activity ofCQ extract released from bilayer sponges was investigated with a discdiffusion method. Bilayer wound dressings' in vitro bioactivity was examined using cytotoxicity determination, woundhealing assay, proliferation, and the secretion of biomarkers forskin tissue regeneration. The nanofiber layer diameter was obtainedin the range of 77.9-97.4 nm. The water vapor permeabilityof the bilayer dressing was obtained as 4021 to 4609 g/m(2)day, as it is in the ideal range for wound repair. The release ofthe CQ extract over 4 days reached 78-80% cumulative release.The release media were found to be antibacterial against Gram-negativeand Gram-positive bacteria. In vitro studies showedthat both CQ extract and POSS incorporation induced cell proliferationas well as wound healing activity and collagen deposition. As a result,CQ-loaded bilayer CHI-POSS nanocomposites were found as a potentialcandidate for wound healing applications.Article Citation - WoS: 40Citation - Scopus: 38Gas Permeation Through Graphdiyne-Based Nanoporous Membranes(Nature Research, 2022) Zhou, Zhihua; Tan, Yongtao; Yang, Qian; Bera, Achintya; Xiong, Zecheng; Yağmurcukardeş, Mehmet; Kim, MinsooNanoporous membranes based on two dimensional materials are predicted to provide highly selective gas transport in combination with extreme permeance. Here we investigate membranes made from multilayer graphdiyne, a graphene-like crystal with a larger unit cell. Despite being nearly a hundred of nanometers thick, the membranes allow fast, Knudsen-type permeation of light gases such as helium and hydrogen whereas heavy noble gases like xenon exhibit strongly suppressed flows. Using isotope and cryogenic temperature measurements, the seemingly conflicting characteristics are explained by a high density of straight-through holes (direct porosity of ∼0.1%), in which heavy atoms are adsorbed on the walls, partially blocking Knudsen flows. Our work offers important insights into intricate transport mechanisms playing a role at nanoscale.Article Citation - WoS: 5Citation - Scopus: 5Flat sheet metakaolin ceramic membrane for water desalination via direct contact membrane distillation(IWA Publishing, 2022) Zewdie, Tsegahun Mekonnen; Habtu, Nigus Gabbiye; Dutta, Abhishek; Van der Bruggen, BartHydrophobic metakaolin-based flat sheet membrane was developed via phase inversion and sintering technique and modified through 1H,1H,2H,2H-perfluorooctyltriethoxysilane grafting agents. The prepared membrane was characterized by different techniques such as XRD, FTIR, SEM, contact angle, porosity, and mechanical strength. Their results indicated that the wettability, structural, and mechanical properties of the prepared membrane confirm the suitability of the material for membrane distillation (MD) application. The prepared metakaolin-based flat sheet membrane acquired hydrophobic properties after surface modification with the water contact angle values of 113.2° to 143.3°. Afterward, the membrane performance was tested for different sodium chloride aqueous solutions (synthetic seawater) and various operating parameters (feed temperature, feed flow rate) using direct contact membrane distillation (DCMD). Based on the findings, the prepared membrane at metakaolin loading of 45 wt.% and sintered at 1,300 °C was achieved the best performance with >95% salt rejection and permeate flux of 6.58 + 0.3 L/m2 · h at feed temperature of 80 °C, feed concentration of 35 g/L, and feed flow rate of 60 L/h. It can be con-cluded that further optimization of membrane porosity, mechanical, and surface properties is required to maximize the permeate flux and salt rejection.Article Citation - WoS: 62Citation - Scopus: 59Exponentially Selective Molecular Sieving Through Angstrom Pores(Nature Publishing Group, 2021) Sun, Pengzhan; Yağmurcukardeş, Mehmet; Zhang, R.; Kuang, Wenjun; Lozada-Hidalgo, Marcelo; Liu, B. L.; Geim, Andre K.Two-dimensional crystals with angstrom-scale pores are widely considered as candidates for a next generation of molecular separation technologies aiming to provide extreme, exponentially large selectivity combined with high flow rates. No such pores have been demonstrated experimentally. Here we study gas transport through individual graphene pores created by low intensity exposure to low kV electrons. Helium and hydrogen permeate easily through these pores whereas larger species such as xenon and methane are practically blocked. Permeating gases experience activation barriers that increase quadratically with molecules’ kinetic diameter, and the effective diameter of the created pores is estimated as ∼2 angstroms, about one missing carbon ring. Our work reveals stringent conditions for achieving the long sought-after exponential selectivity using porous two-dimensional membranes and suggests limits on their possible performance.Article Citation - WoS: 11Citation - Scopus: 12Numerical Modelling Assisted Design of a Compact Ultrafiltration (uf) Flat Sheet Membrane Module(MDPI, 2021) Bopape, Mokgadi F.; Van Geel, Tim; Dutta, Abhishek; Van der Bruggen, Bart; Onyango, Maurice StephenThe increasing adoption of ultra-low pressure (ULP) membrane systems for drinking water treatment in small rural communities is currently hindered by a limited number of studies on module design. Detailed knowledge on both intrinsic membrane transport properties and fluid hydrodynamics within the module is essential in understanding ULP performance prediction, mass transfer analysis for scaling-up between lab-scale and industrial scale research. In comparison to hollow fiber membranes, flat sheet membranes present certain advantages such as simple manufacture, sheet replacement for cleaning, moderate packing density and low to moderate energy usage. In the present case study, a numerical model using computational fluid dynamics (CFD) of a novel custom flat sheet membrane module has been designed in 3D to predict fluid flow conditions. The permeate flux through the membrane decreased with an increase in spacer curviness from 2.81 L/m(2)h for no (0%) curviness to 2.73 L/m(2)h for full (100%) curviness. A parametric analysis on configuration variables was carried out to determine the optimum design variables and no significant influence of spacer inflow or outflow thickness on the fluid flow were observed. The numerical model provides the necessary information on the role of geometrical and operating parameters for fabricating a module prototype where access to technical expertise is limited.Article Citation - WoS: 13Citation - Scopus: 13Solid-Binding Peptide-Guided Spatially Directed Immobilization of Kinetically Matched Enzyme Cascades in Membrane Nanoreactors(American Chemical Society, 2021) Yücesoy, Deniz Tanıl; Akkineni, Susrut; Tamerler, Candan; Hinds, Bruce J.; Sarıkaya, MehmetBiocatalysis is a useful strategy for sustainable green synthesis of fine chemicals due to its high catalytic rate, reaction specificity, and operation under ambient conditions. Addressable immobilization of enzymes onto solid supports for one-pot multistep biocatalysis, however, remains a major challenge. In natural pathways, enzymes are spatially coupled to prevent side reactions, eradicate inhibitory products, and channel metabolites sequentially from one enzyme to another. Construction of a modular immobilization platform enabling spatially directed assembly of multiple biocatalysts would, therefore, not only allow the development of high-efficiency bioreactors but also provide novel synthetic routes for chemical synthesis. In this study, we developed a modular cascade flow reactor using a generalizable solid-binding peptide-directed immobilization strategy that allows selective immobilization of fusion enzymes on anodic aluminum oxide (AAO) monoliths with high positional precision. Here, the lactate dehydrogenase and formate dehydrogenase enzymes were fused with substrate-specific peptides to facilitate their self-immobilization through the membrane channels in cascade geometry. Using this cascade model, two-step biocatalytic production of l-lactate is demonstrated with concomitant regeneration of soluble nicotinamide adenine dinucleotide (NADH). Both fusion enzymes retained their catalytic activity upon immobilization, suggesting their optimal display on the support surface. The 85% cascading reaction efficiency was achieved at a flow rate that kinetically matches the residence time of the slowest enzyme. In addition, 84% of initial catalytic activity was preserved after 10 days of continuous operation at room temperature. The peptide-directed modular approach described herein is a highly effective strategy to control surface orientation, spatial localization, and loading of multiple enzymes on solid supports. The implications of this work provide insight for the single-step construction of high-power cascadic devices by enabling co-expression, purification, and immobilization of a variety of engineered fusion enzymes on patterned surfaces. © 2021 The Authors. Published by American Chemical Society.Article Citation - WoS: 4Citation - Scopus: 3Modification of Surface Charge Characteristics for Unsupported Nanostructured Titania-Zirconia Uf/Nf Membrane Top Layers With Calcination Temperature(Springer, 2020) Erdem, İlker; Çiftçioğlu, MuhsinCeramic membranes are more advantageous alternatives especially for harsh working conditions when compared with the polymeric membranes. The porous multilayer structure of the ceramic membranes (composed of support, intermediate, and top layers) can be prepared via different oxides. Titania and zirconia, having superior properties, are mainly preferred for the top layer formation. The separation properties of the membrane are both dependent on pore morphology and surface charge of the oxide(s) forming the top layer. The effect of surface charge in separation may be very significant in case of filtration of charged species with relatively lower mass as in the ultrafiltration (UF) and nanofiltration (NF). In this study, unsupported membrane top layers were prepared with varying titania/zirconia ratios by sol-gel technique. Their surface charges at different pH conditions after calcination at varying temperatures (400 degrees, 500 degrees, and 600 degrees C) were determined. The surface charge of the pure titania (full Ti) top layer was decreasing with the increasing calcination temperature. The highest magnitudes of zeta potential for both acidic and basic conditions were measured via Zr rich top layer (TiZr2575) at calcination temperatures >= 500 degrees C, which was composed of anatase, rutile (titania), and tetragonal (zirconia) phases after calcination. The tailor-made top layer can be prepared with modifications during membrane preparation.Article Citation - Scopus: 2The Surface Charge of Unsupported Nano-Structured Titania Ceramic Membrane Top Layers With Varying Calcination Temperatures(University of Chemical Technology and Metallurgy, 2019) Erdem, İlker; Çiftçioğlu, MuhsinTitania is one of the most preferable ceramic membrane materials of superior durability (as zirconia) when compared to that of other ceramics, e.g. alumina or silica. The surface charge of the membrane top layer is an important parameter of the separation performance of the multilayer ceramic membrane due to the Donnan exclusion mechanisms. In this study, the change of the surface charge of unsupported nano-structured titania top layer is investigated with calcination temperature variation. The effect observed indicates the possibility of preparation of tailor-made top layers for multilayer ceramic membranes. © 2019, University of Chemical Technology and Metallurgy.Article Citation - WoS: 49Citation - Scopus: 55A Facile Approach for Preparation of Positively Charged Nanofiltration Membranes by In-Situ Crosslinking Between Polyamide-Imide and Polyethylenimine(Elsevier Ltd., 2018) Cihanoğlu, Aydın; Alsoy Altınkaya, SacidePolyamide-imides (PAI) are attractive materials for membrane formation due to their high chemical and thermal stability. In this study, we report a facile approach for preparing positively charged nanofiltration (NF) membranes using a one-step process. Polyethylenimine (PEI) was dissolved in a coagulation bath and formed in-situ ionic crosslinking with PAI during phase inversion. The membranes were characterized by attenuated total reflectance Fourier Transform Infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), atomic force microscopy (AFM), contact angle and zeta potential measurements. The most positively charged membrane was obtained when the pH of the coagulation bath was adjusted to 10. This membrane showed a significant decrease in contact angle and surface roughness and increase in the pure water permeability (PWP) compared to the plain PAI membrane. The salt rejection performance of the crosslinked PAI membrane was measured using MgCl2, CaCl2, NaCl and Na2SO4 salts. The rejection of Mg2+ and Ca2+ ions was found to be 95.6% and 90.2%, respectively. The crosslinked membrane showed excellent chemical stability when stored in HCl solution at pH 3 up to 7 days. Antifouling behaviour of the optimized membrane was tested using bovine serum albumin (BSA) and flux recovery ratio of the membrane was found to be 92.2% at the end of 3 h filtration. The results suggest that the positively charged PAI membranes crosslinked with PEI may have a potential in recovering valuable cationic metals from acid mine wastewater.Article Citation - WoS: 1Citation - Scopus: 1The Effect of Mass Transfer Resistance and Nonuniform Initial Solvent Concentration on Permeation Through Polymer Membranes(John Wiley and Sons Inc., 2018) Zielinski, John M.; Alsoy Altınkaya, SacideA numerical simulation model has been developed which enables one to examine the effects of surface mass transfer resistance on the evaluation of permeation (P*), diffusion (D), and solubility (S) coefficients from unsteady-state mass transfer experiments as well as the transmission rate. A complementary analytical expression has been developed which validates the numerical model and facilitates the evaluation of the concentration dependence of P*, D, and S from sequential step-change experiments, under experimental conditions when the surface mass transfer resistance can be neglected.
- «
- 1 (current)
- 2
- 3
- »