Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
90 results
Filters
Settings
Search Results
Review Citation - Scopus: 5A Comparative Evaluation of Dark Fermentative Bioreactor Configurations for Enhanced Hydrogen Production(Springer, 2025) Gören, Ayşegül Yağmur; Dincer, I.; Khalvati, A.Energy from renewable resources has been growing in popularity, which ultimately helps reduce emissions of greenhouse gases (GHGs) and contaminants. Since hydrogen (H2) has a higher combustion production of energy than hydrocarbon fuels, it has been identified as a clean, sustainable, and environmentally friendly energy source. There are several benefits to producing biohydrogen (bioH2) from renewable sources, including lower cost and increased sustainability. Among the bioH2 production processes, dark fermentation supports commercialization and scale-up for industrial applications. This paper considers the various bioreactors, such as anaerobic sequencing batch, continuous stirred, up-flow, fixed-bed, and membrane reactors, and their operational approaches for bioH2 production. This review paper also performs the bibliometric analysis method to identify historical and current developments in a particular field of reactor configuration studies. Furthermore, the main variables influencing reactor performance and methods for increasing process efficiency considering economic and environmental aspects are addressed. The results revealed that continuously stirred reactors are widely utilized for bioH2 production as a cost-effective reactor configuration. Moreover, the membrane bioreactors and fixed-bed reactors are yielded higher bioH2 performance than other configurations. Nevertheless, high energy consumption and costs have presented the need for further development of reactors. Consequently, future recommendations to solve the critical problems faced in reactor configurations, the gaps in the literature, and the points that need improvement were comprehensively reported. © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2025.Article Citation - WoS: 6Citation - Scopus: 9Holistic Managements of Textile Wastewater Through Circular, Greener and Eco-Innovative Treatment Systems Developed by Minimal To Zero Liquid Discharge(Elsevier, 2024) Aydıner, Coşkun; Doğan, Esra Can; Mert, Berna Kiril; Pala, Burcu; Demirozlu, Tugba Nur; Balcı, Esin; Narci, Ali OguzhanNew pragmatic and viable solutions to reduce or prevent discharge and to protect reserves are currently among the top-prioritised research for cleaner, circular, and resource-efficient use of industrial waters. So, the development of eco-sustainable water management is essential for green industrial development that will meet versatile and eco-sensitive regulatory standards, especially in water-intensive industries. Textile wastewater was reclaimed in semi to fully closed loops for minimal to zero liquid discharge. Concentrate-mixed wastewater was steadily treated in a hybrid membrane oxidation reactor at 60-80 % synergistic performances with remarkable UF fluxes of 96.4-820 L/m2h without any sludge discharge. Effluent was purified with 90-100 % removals and 20-80 L/m2h in nanofiltration and reverse osmosis. Due to Fenton-specific operation, more handling by ion exchange and neutralisation required to harvest membrane reuse waters and reactor discharge effluents with guaranteed Fe and pH. All-in-one system simulations indicated that high quality reuse waters are produced by 99.9 % efficiency and 98 and 100 % savings in iron and acid but 20-51 % more oxidant through concentrate recycling and regenerant reuse. It was also revealed that reactor effluents can be released to the sea or conventional biological treatment or can be eco-sustainably exploited for in-situ chemical and ex-situ bio-induced recovery of vivianite. This research demonstrates that how textile wastewater can be managed holistically by liquid discharge approaches from 50 % minimal to 99.9 % zero just in two-step, i.e. pretreatment and preconcentration, with consumable minimisation and valuable waste recovery through the eco-innovative systems which are developed as circular, greener, and sludge-free compatible with sustainable development goals.Article Citation - WoS: 6Citation - Scopus: 6A Novel Land Surface Temperature Reconstruction Method and Its Application for Downscaling Surface Soil Moisture With Machine Learning(Elsevier, 2024) Güngör, Şahin; Gündüz, OrhanDownscaling of soil moisture data is important for high resolution hydrological modeling. Most downscaling studies in the literature have used spatially discontinuous land surface temperature (LST) maps as the main auxiliary parameter, which limits the creation of continuous soil moisture maps. The number of studies on soil moisture downscaling with machine learning that use gapless LST maps is limited. With this motivation, a hybrid reconstruction method has been proposed in this study to practically obtain continuous LST maps, which are then used to produce high resolution surface soil moisture (SSM) datasets. The proposed method is shown to have high mean performance with R2 and RMSE values of 0.94 and 1.84°K, respectively, for the period between 2019 and 2022. The developed reconstructed LST maps were then used to downscale original 9 km spatial resolution soil moisture datasets of SMAP L3 and SMAP L4 with Random Forest (RF) machine learning algorithm. The RF model were run with four different rainfall datasets, and the MSWEP rainfall dataset was found to produce the best results. The use of antecedent rainfall values as input variables in machine learning models has been shown to improve the performance of the models R2 0.76 to 0.93. The accuracy of the downscaled data was later evaluated for Western Anatolia Basins (WAB) in Türkiye with 31 in-situ stations. The downscaled SMAP L4 had good average statistical indicators R (0.815 ± 0.1), RMSE (0.09 ± 0.047 cm3/cm3), and ubRMSE (0.058 ± 0.025 cm3/cm3). Downscaled SMAP L3 was also validated with in-situ observations with satisfactory R (0.79 ± 0.074), RMSE (0.09 ± 0.043 cm3/cm3), and ubRMSE (0.06 ± 0.026 cm3/cm3) statistics. Furthermore, the performance of the downscaled SMAP L3 was also cross validated with SMAP + Sentinel 1 (L2) dataset between 2019 and 2022. The mean statistics of R (0.761 ± 0.11) and Root Mean Squared Difference (RMSD) (0.05 ± 0.014 cm3/cm3) between downscaled SMAP L3 and L2 data revealed that the new reconstruction method of LST used in the RF model for downscaling of soil moisture performed well to obtain high resolution soil moisture datasets. The proposed technique also overcame the difficulties associated with coastal regions where data was masked for quality considerations, by not only enhancing overall spatial resolution but also filling these data gaps and giving a complete SSM coverage. © 2024 Elsevier B.V.Article Citation - WoS: 20Citation - Scopus: 24Lime-Activated One-Part Geopolymer Mortars From Construction, Demolition and Industrial Wastes(Elsevier, 2024) Kogbara, Reginald B.; Al-Zubi, Abdelrahman; Mortada, Youssef; Hammoud, Ahmad; Masad, Eyad A.; Khraisheh, Marwan K.This work focused on the production of one-part geopolymer mortars from construction and demolition wastes (CDW) blended with steel slag. Previous related studies on geopolymer production from CDW utilized conventional two-part geopolymers comprised of highly alkaline activator solutions and CDW materials. Thus, the study's significance consists in producing high-strength (≥35 MPa) ambient-cured mortars from CDW with predominantly concrete waste by replacing conventional highly alkaline activator solutions with an environmentally-friendly alkaline activator, Ca(OH)2 powder. Four mortar mixtures were produced with CDW contents ranging from 50 to 65 % dry weight, varying the brick waste content from 3 to 18 %. The effect of elevated temperature (40 °C) curing was also considered. The results showed that 55 % CDW content had optimum performance across all parameters studied such as compressive and flexural strengths, setting time, as well as changes in nuclear magnetic resonance (NMR)-determined pore structure (porosity and mean pore size) and x-ray diffraction (XRD)-determined degree of crystallinity over time. It had 28-day compressive and flexural strengths of 42 and 5.8 MPa, respectively, and initial and final setting times of 25 and 50 min. The importance of sufficient brick waste content in the geopolymer mixtures for effective mechanical performance is highlighted. The inclusion of concrete waste in powder form reduced compressive strength under ambient curing but improved performance at 40 °C curing. It is concluded that sustainable structural mortars can be produced by ‘just adding water’ to an optimized CDW mixture with predominantly concrete waste blended with brick waste and slag and activated by powdered Ca(OH)2. © 2023 The AuthorsArticle Citation - WoS: 19Citation - Scopus: 18An Appraisal of the Local-Scale Spatio-Temporal Variations of Drought Based on the Integrated Grace/Grace-fo Observations and Fine-Resolution Fldas Model(Wiley, 2023) Khorrami, Behnam; Ali, Shoaib; Gündüz, OrhanThe gravity recovery and climate experiment (GRACE) observations have so far been utilized to detect and trace the variations of hydrological extremes worldwide. However, applying the coarse resolution GRACE estimates for local-scale analysis remains a big challenge. In this study, a new version of the fine resolution (1 km) Famine early warning systems network Land Data Assimilation System (FLDAS) model data was integrated into a machine learning model along with the GRACE data to evaluate the subbasin-scale variations of water storage, and drought. With a correlation of 0.99 and a root mean square error (RMSE) of 3.93mm of its results, the downscaling model turned out to be very successful in modelling the finer resolution variations of TWSA. The water storage deficit (WSD) and Water Storage Deficit Index (WSDI) were used to determine the episodes and severity of drought events. Accordingly, two severe droughts (January 2008 to March 2009 and September 2019 to December 2020) were discerned in the Kizilirmak Basin (KB) located in Central Turkiye. The characterization of droughts was evaluated based on WSDI, scPDSI, and model-based drought indices of the soil moisture storage percentile (SMSP) and groundwater storage percentile (GWSP). The results indicated discrepancies in the drought classes based on different indices. However, the WSDI turned out to be more correlated with GWSP, suggesting its high ability to monitor groundwater droughts as well.Article Citation - WoS: 5Citation - Scopus: 5Mechanical Properties of Palygorskite Clay Stabilized With Polyelectrolytes(Elsevier, 2023) Huang, Jianxin; Makhatova, Ardak; Kogbara, Reginald; Masad, Eyad; Sukhishvili, Svetlana; Little, DallasTwo polyelectrolytes of opposite charges, sodium polystyrene sulfonate (PSS) and polydiallyldimethylammonium chloride (PDADMAC), were investigated to stabilize palygorskite clay at varying dosages of 0.2, 0.8, 1.6, and 3.2 % by the dry weight of the soil. Both PSS and PDADMAC improved the unconfined compressive strength of the palygorskite clay. PSS was effective at all the polymer contents studied after 7 days of dry curing and the strength increased with the dosages of PSS added, ranging from 2 MPa (0.2 % PSS) to 3.1 MPa (3.2 % PSS), compared with 1.5 MPa of the untreated soil. PDADMAC, on the other hand, showed comparable strength improvements as PSS did at the high polymer contents of 1.6 and 3.2 % but did not work at 0.2 and 0.8 % dosages. Under wet curing at 100 % relative humidity, PSS improved the strength of the clay by 40 % (620 kPa at 0.2 % PSS) to 77 % (764 kPa at 1.6 % PSS) compared to the untreated clay (440 kPa). PDADMAC exhibited less improvement than PSS under wet conditions but still worked at dosages of 0.8 and 1.6 %. Besides strength, the resilient modulus and fracture toughness of the treated specimens increased by approximately 10 % and 66 %, respectively, when treated with 1.6 % PSS, which was the optimum content based on the strength results. PDADMAC-treated palygorskite, however, exhibited cracking during curing for both tests, showing potential drying crack issues. The adsorption of PSS and PDADMAC on palygorskite clay were also measured using ultraviolet–visible spectroscopy, and binding between these polymers and palygorskite has been confirmed. The measured adsorption capacities of PSS and PDADMAC were comparable (2.9 and 2.7 mg/g, respectively), while the PSS was somewhat more efficient in improving soil mechanical properties. © 2023 Elsevier LtdArticle Citation - WoS: 1Citation - Scopus: 1Exposure To Fumes of a Vegetable Margarine for Frying: Respiratory Effects in an Experimental Model(American Chemical Society, 2023) Cimrin, Arif H.; Alpaydin, Aylin Ozgen; Ozbal, Seda; Toprak, Melis; Yılmaz, Osman; Uluorman, Funda; Ergur, Bekir Uğur; Gürel, Duygu; Sofuoğlu, Sait CemilDeep frying is one of the strongest emission sources into indoor air. A vegetable margarine has recently been used in commercial kitchens. This study investigated the respiratory effects of exposure to its fumes in an experimental model. A setup with glass chambers was constructed. A chamber housed a fryer. The fumes were transported to the other chamber where 24 Wistar albino rats were placed in four randomized groups: acute, subacute, chronic, and control for the exposure durations. PM10 concentration in the exposure chamber was monitored to ensure occupational levels were obtained. Sacrification was performed 24 h after exposure. Lung, trachea, and nasal concha specimens were evaluated by two blinded histologists under a light microscope with hematoxylin–eosin. Mild mononuclear cell infiltration, alveolar capillary membrane thickening, alveolar edema, and diffuse alveolar damage, along with diffuse hemorrhage, edema, and vascular congestion in the interstitium were observed in the acute and subacute groups, and were overexpressed in the chronic group, whereas normal lung histology was observed in the control group. The results indicate that exposure to fumes of vegetable margarine for frying in commercial kitchens may cause pulmonary inflammation that becomes severe as the duration of the exposure increases.Article Fabrication of Superhydrophilic Teos-Lactic Acid Composite Films and Investigation of Biofouling Behaviour(Yıldız Teknik Üniversitesi, 2022) Ervan, Tuğçe; Küçüker, Mehmet Ali; Cengiz, UğurPhytoplankton and diatom microalgae species cause biofouling by adhering to the surfaces, especially in closed cultivation systems such as tubular photobioreactors. This biofilm formation blocks the sunlight; after harvesting, it is necessary to clean the reactor. This cleaning process causes loss not only for time and finance but also in terms of environmental pollution due to using toxic chemicals and excess water usage. This study aimed to investigate the reduction of the microorganism cell adhesion on the hybrid surface. To succeed in this, the composite surface of tetraethoxysilane (TEOS) and lactic acid (LA) was prepared by the sol-gel process. Then the hybrid surfaces were coated on glass slides by the dip coating method. The wettability performance of the TEOS-LA hybrid surface was investigated using contact angle measurement and light transmittance. The wettability result showed that the superhydrophilic surface having 54 mJ/m2 of surface free energy values was obtained. An increase in the lactic acid content of the composite films increased the surface free energy (SFE) values decreasing the water contact angle. A pencil hardness test characterized the mechanical strength of the surfaces, and it was determined that the hardness of the composite films was decreased by increasing the LA content of the composite films. Resultantly, it is found that the TEOS-LA superhydrophilic composite film reduces the adhesion of microalgae.Article Citation - WoS: 17Citation - Scopus: 19Development of Ca(oh)2-Based Geopolymer for Additive Manufacturing Using Construction Wastes and Nanomaterials(Elsevier, 2023) Mortada, Youssef; Masad, Eyad; Kogbara, Reginald B.; Mansoor, Bilal; Seers, Thomas; Hammoud, Ahmad; Karaki, AymanRecent growth in additive manufacturing (AM) or 3D printing in the construction field has motivated the development of various materials that vary in its composition and properties. This paper introduces, characterizes, and evaluates the performance of a sustainable and environmentally friendly geopolymer mixture composed of construction wastes. The geopolymer mixture has calcium hydroxide (Ca(OH)2) as the main alkaline activator and incorporates nanomaterials such as nano-silica and nano-clay to enhance its suitability for AM. The combined use of Ca(OH)2 for alkali activation, and nanomaterials for tailoring the behavior of construction wastes for 3D printing, is novel and addresses the shortcomings of conventional alkaline activators. The paper includes the outcomes of the analysis of the mechanical properties, printability, and microstructure of the geopolymer mixture. The 28-day compressive strength of the mixture reached 42 MPa with ambient temperature curing, which is comparable to traditional geopolymers. The inclusion of 1 wt % of nano-silica accelerated the geopolymerization process and led to the largest (35 %) reduction in the setting time. Similarly, incorporating 1 wt % of nano-clay led to reduction of the thermal conductivity from 0.709 W/mK to 0.505 W/mK, due to the introduction of thermal barriers. The printability of the studied waste-based geopolymer mixture was validated through the successful fabrication of a 3D-printed model. © 2023 The AuthorsArticle Citation - WoS: 21Citation - Scopus: 21Remote Sensing-Based Monitoring and Evaluation of the Basin-Wise Dynamics of Terrestrial Water and Groundwater Storage Fluctuations(Springer, 2023) Khorrami, Behnam; Gündüz, OrhanThe recent dynamics of terrestrial water storage (TWS) and groundwater storage (GWS) fluctuations were investigated based on the Gravity Recovery And Climate Experiment (GRACE) observations over 25 basins of Türkiye. Coarse-resolution GRACE estimates were downscaled based on the Random Forest algorithm. The impacts of precipitation (P) and evapotranspiration (ET) on the variations of water storage were also assessed. The findings demonstrated good performance for the RF model in simulating finer resolution estimates of TWS. The results indicated a diminishing trend of TWS and its hydrologic components over all the basins from 2003 to 2020. The Doğu Akdeniz Basin with the annually decreasing TWS and GWS of 1.15cm/yr and 1.10cm/yr was the most critical basin of Türkiye. The least storage loss was observed in the Batı Karadeniz Basin with the annual TWS and GWS loss of 0.38cm/yr and 0.45cm/yr , respectively. Based on the results, Türkiye has lost, on average, an estimated 5.16km3/yr and 4.09km3/yr of its TWS and GWS, respectively, which are equivalent to the total storage loss of 92.88km3 and 73.62km3 of TWS and GWS during the last 18 years. The results also indicated that P and ET interact differently with the variations of TWS and GWS. The net water flux was revealed to be partially correlated with the total water storage fluctuations, suggesting the governing role of other deriving forces particularly the anthropogenic factors in the spatiotemporal variations of Türkiye’s water storage; therefore, a sector-specific analysis of the water storage variations is crucial for the country, particularly by concentrating more on the dynamics of GWS. Graphical Abstract: [Figure not available: see fulltext.]. © 2023, The Author(s), under exclusive licence to Springer Nature Switzerland AG.