Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/11147/7148

Browse

Filters

2003 - 200912010 - 20201

Settings

Department: search.filters.department.İzmir Institute of Technology. Materials Science and EngineeringSubject: search.filters.subject.Compression test

Search Results

Now showing 1 - 2 of 2
  • Article
    Citation - WoS: 23
    Citation - Scopus: 23
    Hot Air Permeable Preceramic Polymer Derived Reticulated Ceramic Foams
    (American Chemical Society, 2020) de Mello Innocentini, Murilo Daniel; Marsola, Gabriel Antonio; Orlandi Lasso, Paulo Renato; Soraru, Gian Domenico; Semerci, Tuğçe; Vakıfahmetoğlu, Çekdar
    Open and partially closed cell polymer derived ceramic, specifically silicon oxycarbide, foams were produced from commercially available polyurethane (PU) foams through the replica technique combined with the preceramic polymer pyrolysis route. The focus was directed on the role of PU morphology (cell size and open/partially closed cells), synthesis parameters (cross-linking temperature and time), and type of the polysiloxane precursors for fine-tuning the microstructural features of the resulting ceramic foams and their eventual effect on the fluid dynamic/mechanical properties. Consequently, ceramic foams having dense/hollow struts with/without hierarchical porosity were able to be manufactured and characterized in detail. The average total porosity including all compositions was above 95%, the maximum surface area was found to be reaching 79 m(2).g(-1), and the room temperature permeability measurements indicated a wide range for k(1) (0.28 x 10(-9)-11.48 x 10(-9) m(2)) and k(2) (0.34 x 10(-5)-54.17 x 10(-5) m) according to the selected PU substrate. Hot air permeation tests showed that the foams were stable up to 700 degrees C without any loss of functionality. Accordingly, they are envisioned to be employed as reusable air filtration device parts for pollutants (viruses, bacteria, dust, etc.), catalytic supports, and filter components for reactions occurring in aggressive environments.
  • Article
    Citation - WoS: 54
    Citation - Scopus: 62
    Sic-Particulate Aluminum Composite Foams Produced by Powder Compacts: Foaming and Compression Behavior
    (Springer Verlag, 2003) Elbir, Semih; Yılmaz, Selahattin; Toksoy, Ahmet Kaan; Güden, Mustafa; Hall, Ian W.
    The foaming behavior of SiC-particulate (8.6% by volume) aluminum composite powder compacts contained Titanium Hydride blowing agent was investigated by heating above the melting temperature (750°C) in a pre-heated furnace. Aluminum powder compacts were also prepared and foamed using similar compaction and foaming parameters in order to determine the effect of SiC-particulate addition on foaming and compression behavior. The linear expansions of the compacts at various furnace holding times were ex situ determined. Optical and scanning electron microscopy techniques were used to characterize prepared and deformed foams microstructures. The SiC-particulate addition was found to increase the linear expansion and reduce the extent of the liquid metal drainage and cell coarsening of the aluminum compacts. The composite foam samples also showed higher compressive stresses, but a more brittle behavior as compared with aluminum foams.