Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
7 results
Search Results
Article Citation - WoS: 9Citation - Scopus: 9Zno Nanostructures for Photocatalytic Degradation of Methylene Blue: Effect of Different Anodization Parameters(Springer, 2022) Öksüz, Ahmet Emrecan; Yurddaşkal, Metin; Kartal, Uğur; Dikici, Tuncay; Erol, MustafaIn this paper, the photocatalytic activity of ZnO nanostructures formed by anodization method with different parameters was investigated. The synthesis of ZnO nanostructures with different morphology by varying anodic oxidation parameters containing electrolytes, molarity, voltage, and duration was analyzed. ZnO nanostructures were prepared through different parameters consisting of six samples. The produced ZnO nanostructures were investigated by using X-ray diffraction, scanning electron microscopy, diffuse reflectance spectroscopy, and UV-Vis spectrophotometer. It was found that the morphology of ZnO structures was formed as nanorods, needle-like, flower-like, heterogeneous, and homogeneous of mixed structures. ZnO nanostructures were identified by matching X-Ray diffraction peaks due to the international center for diffraction data database. Experiments on photocatalytic degradation of methylene blue demonstrated that the photocatalytic activity of ZnO samples. The best photocatalytic performance was observed by the sample anodized for an hour in 0.05 M of KHCO3 electrolytes with 40 V electrical potential. It was observed that the removal of methylene blue increased 3 times (photocatalytic degradation efficiency similar to 31% for methylene blue vs similar to 90% by the best sample) thanks to the obtained ZnO nanostructured photocatalysts. The results showed that an increment of the voltage has a significant effect on the photocatalytic activity of ZnO while keeping other parameters including molarity, time, and electrolyte type constant.Article Citation - WoS: 5Citation - Scopus: 6Degradation Behaviour of Ti-12nb Alloy Coated With Zno/Tin Double Layer(Elsevier, 2021) Çaha, İhsan; Alves, A. C.; Affonco, L. J.; da Silva, J. H. D.; Rodrigues, I. R.; Grandini, C. R.; Rocha, L. A.; Pinto, Ana Maria Pires; Lisboa Filho, P. N.; Toptan, FatihTi and its alloys have attracted attention for biomedical applications, but their low tribocorrosion resistance, lack of bioactivity and antimicrobial properties are still major clinical concerns. In this study a ZnO coating, intended to act as an antibacterial agent, was deposited on a Ti-12Nb alloy, which was previously coated with a TiN hard coating, for improving tribocormsion resistance. The idea behind is the proof-of -concept that ZnO is able to provide interesting tribological properties to the surface, thus inspiring new ZnO-containing surfaces that can combine antimicrobial properties and tribocormsion resistance. Thus, the corrosion behaviour was studied by open circuit potential, electrochemical impedance spectroscopy, and potentiodynamic polarization tests in phosphate buffered solution at body temperature. The tribocormsion behaviour was carried out at open circuit potential under 0.5 N of normal load, 1 Hz frequency, during 3600 s sliding in phosphate buffered solution at body temperature. The results indicated that duplex coating sample showed better corrosion resistance and drastically better tribocorrosion resistance compared to uncoated and single TiN coating samples.Article Citation - WoS: 5Citation - Scopus: 6Manufacturing Radar-Absorbing Composite Materials by Using Magnetic Co-Doped Zinc Oxide Particles Synthesized by Sol-Gel(SAGE Publications Inc., 2020) Atay, Hüsnügül Yılmaz; İçin, ÖyküAn indicator of being a strong country in today's world is that they have powerful weapons. In this sector where science is used exceedingly, the "stealth" takes an important place. Radar-absorbing materials are used in stealth technology to disguise an object from radar detection, such that it can allow a plane to be perceived as a bird. In this study, Co-doped zinc oxide reinforced styrofoam sheet composites were manufactured as radar-absorbing materials. For this purpose, Co-doped zinc-ZnO particles were synthesized via the Sol-Gel method with doping concentrations of 0%, 3%, 6%, 9%, and 12%. They were embedded in a styrofoam matrix with different loading levels to see the concentration dependence. The as-prepared powders were characterized by using X-ray diffraction and Scanning Electron Microscope-Energy Dispersive Spectroscopy. Magnetic characterization of samples was carried out using a vibrating sample magnetometer. Finally, the radar-absorbing test was applied with a network analyzer to achieve the main purpose of this research. It was concluded that Co-doped zinc oxide reinforced composites have electromagnetic properties that indicate potential applications in the radar-absorbing area.Article Citation - WoS: 31Citation - Scopus: 34Dual Remediation of Waste Waters From Methylene Blue and Chromium (vi) Using Thermally Induced Zno Nanofibers(Elsevier, 2020) Elhousseini, Mohamed Hilal; Isık, Tuğba; Kap, Özlem; Verpoort, Francis; Horzum, NesrinElectrospun zinc oxide (ZnO) nanofibers have been significantly improved via a simple heat treatment modification. The present work reports an intriguing cost-effective microstructure tuning, by drastically dropping the temperature of the calcined sample during the cooling period, to get highly photocatalytically active ZnO nanofibers. The calcination temperatures are deducted from thermogravimetric analysis, the phase and purity are confirmed by X-ray diffraction, while the morphology and texture have been revealed by field emission scanning electron microscopy and high-resolution transmission electron spectroscopy. X-ray photoelectron spectroscopy was conducted to get further insight on the surface composition and oxidation states, while N-2-adsorption isotherms were analyzed using the Brunauer-Emmet-Teller methodology. The crystallinity, surface area, and porosity of the ZnO nanofibers, as well as the exposure of active sites, have been enhanced by the rapid cooling method. Photodegradation activity toward methylene blue was improved from 88% to 94%, and 85% to 97%, for free cooled and rapid cooled samples calcined at 300 degrees C and 500 degrees C respectively. The adsorption of chromium (VI) was also tested and reached around 85 mg/g at 100 ppm without being saturated, thereby highlighting one of the most cost-effective performance-enhancing modifications so far that could be extended on different metal oxide nanomaterials.Article Citation - WoS: 195Optical Properties of Composites of Pmma and Surface-Modified Zincite Nanoparticles(American Chemical Society, 2007) Demir, Mustafa Muammer; Koynov, Kaloian; Akbey, Ümit; Bubeck, Christoph; Park, Insun; Lieberwirth, Ingo; Wegner, GerhardLocate full-text(opens in a new window)|Full Text(opens in a new window)|View at Publisher| Export | Download | Add to List | More... Macromolecules Volume 40, Issue 4, 20 February 2007, Pages 1089-1100 Optical properties of composites of PMMA and surface-modified zincite nanoparticles (Article) Demir, M.M.a, Koynov, K.a, Akbey, Ü.a, Bubeck, C.a, Park, I.ab, Lieberwirth, I.a, Wegner, G.a a Max Planck Institute for Polymer Research, Ackermannweg 10, D-55128 Mainz, Germany b Seoul National University, School of Chemistry, Korea, South Korea View references (65) Abstract Composites that show visible light transmittance, UV absorption, and moderately high refractive index, based on poly(methyl methacrylate) (PMMA) and zinc oxide (zincite, ZnO) nanoparticles, were prepared in two steps. First, surface-modified ZnO nanoparticles with 22 nm average diameter were nucleated by controlled precipitation via acid-catalyzed esterification of zinc acetate dihydrate with pentan-1-ol. The surface of growing crystalline particles was modified with tert-butylphosphonic acid (tBuPO3H2) in situ by monolayer coverage. Particle size and graft density of -PO3H 2 on the particle surface were controlled by the amount of surfactant applied to the reaction solution. Second, the surface-modified particles were incorporated into PMMA by in-situ bulk polymerization. Free radical polymerization was carried out in the presence of these particles using AIBN as initiator. Volume fraction (0) of the particles was varied from 0.10 to 7.76% (0.5 to 30 wt %). Although the particles are homogeneously dispersed in monomer, segregation of the individual particles upon polymerization was observed. Optical constants of the films ca. 2.0 μm including absorption and scattering efficiencies, indices of refraction, and dispersion constants were determined. The absorption coefficient at 350 nm increases linearly with ZnO, obeying Beer's law at low particle contents. However, it levels off toward a value of about 5000 cm-1 and shows a negative deviation at high concentrations because of aggregation of the individual particles. Waveguide propagation loss coefficients of the composite films were examined by prism coupling. A steep increase of the loss coefficient was found with a slope of 52 dB cm-1 vol %-1 as the volume fraction of the particle increases. The refractive index of the composites depends linearly on volume fraction of ZnO and varies from 1.487 to 1.507 (φ = 7.76%) at 633 nm. The dispersion of refractive index was found to be consistent with Cauchy's formula.Article Citation - WoS: 185Pmma/Zinc Oxide Nanocomposites Prepared by In-Situ Bulk Polymerization(John Wiley and Sons Inc., 2006) Demir, Mustafa Muammer; Memesa, Mine; Castignolles, Patrice; Wegner, GerhardDispersing surface-modified zinc oxide nano-particles (ZnO) in methyl methacrylate (MMA) improves the free radical bulk polymerization process as well as the thermal stability of the formed polymer. Hydroxy groups available on the ZnO surface may induce a degenerative transfer. This suppresses the gel effect, which leads to a better control of the heat evolution during the late stages of polymerization. The formation of chains having vinylidene end groups and head-to-head links is suppressed, which shifts the onset of thermal decomposition to the regime where decomposition occurs by random chain scission.Article Citation - WoS: 74Humidity Sensing Properties of Zno-Based Fibers by Electrospinning(Elsevier Ltd., 2011) Horzum Polat, Nesrin; Taşçıoğlu, Didem; Okur, Salih; Demir, Mustafa MuammerZinc oxide (ZnO) based fibers with a diameter of 80-100 nm were prepared by electrospinning. Polyvinyl alcohol (PVA) and zinc acetate dihydrate were dissolved in water and the polymer/salt solution was electrospun at 2.5 kV cm-1. The resulting electrospun fibers were subjected to calcination at 500 °C for 2 h to obtain ZnO-based fibers. Humidity sensing properties of the fiber mats were investigated by quartz crystal microbalance (QCM) method and electrical measurements. The adsorption kinetics under constant relative humidity (RH) between 10% and 90% were explained using Langmuir adsorption model. Results of the measurements showed that ZnO-based fibers were found to be promising candidate for humidity sensing applications at room temperature.