Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
10 results
Search Results
Article Ferroelectric to Relaxor Crossover in Zr-Doped BaTiO3-Based Ceramics and Its Consequences for the Electrocaloric Effect(Royal Soc Chemistry, 2025) Akkasoglu, Oguz; Karakaya, Merve; Novak, Nikola; Fulanovic, Lovro; Adem, UmutNa0.5Bi0.5TiO3 (NBT)-substituted BaTiO3 (BT)-rich solid solutions demonstrate significant electrocaloric effects owing to the first-order nature of their ferroelectric phase transition. However, their narrow phase transition range and relatively high transition temperature limit their suitability for electrocaloric cooling applications. To address these issues, we have investigated the impact of Zr-substitution (0-5 mol%) at the B-site on the phase transition behaviour of 0.7BT-0.3NBT solid solution. Our findings indicate that Zr-substitution strongly decreases the tetragonality and the Curie temperature of the samples. All samples exhibit relaxor-like characteristics, following the Vogel-Fulcher approach. However, at low Zr doping (0-3 mol%), a spontaneous transition into the ferroelectric phase is also observed on cooling from high temperatures. At higher Zr doping (4-5 mol%), the transition into the ferroelectric phase disappears and the sample presents canonical relaxor behaviour. The samples with canonical relaxor behaviour (4-5 mol% Zr) feature wider temperature ranges where a significant electrocaloric response is sustained, which yielded a large Tspan of similar to 45 degrees C for the 4% Zr-doped sample where a Delta T value of 0.77 K was maintained.Article Benzoxazine-Linked Porous Organic Networks for Effective Iodine Capture(Royal Soc Chemistry, 2025) Canturk, Batu Sercan; Erdogmus, Mustafa; Gecalp, Yasmin; Sahin, Hasan; Buyukcakir, OnurThis study presents, for the first time, the investigation of a benzoxazine-linked porous organic network (BPON) for iodine capture. BPON was synthesized through the Mannich condensation of paraformaldehyde, melamine, and phloroglucinol. The porous structure and heteroatom-rich skeleton of BPON make it a promising adsorbent platform for iodine capture. BPON demonstrated an effective iodine capture capability in the vapour phase (3.32 g g-1) and an impressive uptake capacity in the aqueous phase (2.80 g g-1 capacity, 90.4% removal efficiency in 12 hours). To investigate the effect of curing on iodine capture, BPON was thermally cured to prepare thermally cured benzoxazine-linked porous organic networks (cBPONs) at three different temperatures: 200, 250, and 300 degrees C. cBPONs demonstrated an iodine capture capacity of up to 2.20 g g-1 and 1.67 g g-1 for vapour and aqueous phases, respectively. The iodine capture mechanism of BPON was investigated using various ex situ analyses, including Fourier transform infrared (FT-IR), Raman spectra, and X-ray photoelectron spectra (XPS). Structural analysis and theoretical calculations indicated the formation of a charge-transfer complex upon iodine capture, leading to the generation of polyiodide species. This study demonstrates the potential of BPONs for iodine capture and paves the way for developing new polymeric adsorbents for capturing iodine from air and water.Article A Comparative Study on Hydroxyl and Ether Functionalized Ionic Liquid Additives for Defect Passivation and Stability in Perovskite Solar Cells(Royal Soc Chemistry, 2025) Siyahjani Gültekin, S.; Turgut, S.B.; Ozdemir, Saliha; Gültekin, B.; Varlikli, C.This study systematically investigates the effects of two ionic liquid (IL) additives, 2-(2-methoxyethoxy)-N,N-bis(2-(2-methoxyethoxy)ethyl)-N-methylethanaminium iodide (EtAI) and 2-hydroxy-N,N-bis(2-hydroxyethyl)-N-methylethanaminium iodide (HOAI), on the structural, morphological, optical, and photovoltaic properties of triple-cation perovskite thin films. FT-IR, XRD, XPS, SEM, and AFM analyses were employed to characterize additive-induced modifications, while UV-Vis, PL, and TRPL measurements were utilized to evaluate their optical properties. SEM and AFM results reveal that the hydroxyl (-OH) groups in HOAI and etheric groups in EtAI significantly improve film morphology by enhancing grain size, reducing surface roughness, and refining grain boundaries, thereby promoting more efficient charge transport. Photovoltaic characterization revealed that the film with 3 mmol HOAI exhibited a maximum reverse-scan power conversion efficiency (PCE) of 17.65%, retaining approximately 85% of its initial efficiency after 1000 hours under ambient conditions. In contrast, the film with 1 mmol EtAI achieved a reverse-scan PCE of 17.17%, although higher EtAI concentrations adversely affected stability. These findings provide valuable insights into the interplay between additive chemistry and perovskite film quality, offering a promising route for improving the efficiency and long-term performance of perovskite solar cells. This record is sourced from MEDLINE/PubMed, a database of the U.S. National Library of MedicineArticle Creatinine-On Colorimetric Elisa-Based Serum Creatinine Detection in a Microfluidic Device(Royal Soc Chemistry, 2025) Karakuzu, Betul; Tekin, H. CumhurChronic kidney diseases (CKDs), which often end in kidney failure for many people around the world, have an important place in public health given that they also trigger other diseases. Therefore, the development of fast and cost-effective diagnostic technologies enables effective monitoring of patients and early diagnosis. Here, using the Enzyme-Linked Immunosorbent Assay (ELISA) principle, serum creatinine concentrations were determined using the developed lab-on-a-chip (LOC) platform. In this system, which was termed "creatinine-on-a-chip", colorimetric ELISA protocol was applied to determine creatinine levels in a microfluidic chip functionalized with creatinine-specific antibodies. Creatinine detection was performed by quantifying the absorbance difference between the detection and reference channels, normalized to the reference signal within the microfluidic chip. The detection signal intensity varied depending on the region selected along the microfluidic channel. The adsorption of the capture antibody used for surface functionalization, which was particularly more pronounced near the inlet region, played a critical role in the detection signal. These findings suggest that random selection of the detection area can lead to significant signal variability, and that careful selection of a well-characterized region is essential for improving detection performance. With this developed system, creatinine was detected with high sensitivity in the linear range of 1-20 mu g mL-1, both spiked in phosphate buffered saline (PBS) and fetal bovine serum (FBS). Using the creatinine-on-a-chip, serum creatinine analysis can be performed rapidly (similar to 15 min) in a cost-effective manner ($1.05 per test).Article Advanced Adsorptive Removal of Dimethyl Phthalate From Water Using a Tertiary Amine-Functionalized Polymeric Resin: Insights Into Experimental Design and Statistical Analysis(Royal Soc Chemistry, 2025) Turekkan, Kubranur; Recepoglu, Yasar Kemal; Ova Ozcan, Duygu; Arar, OzgurThis study investigates the effective removal of dimethyl phthalate (DMP) from aqueous solutions using Purolite Macronet MN100, a polymer-based adsorbent containing tertiary amine functional groups. A series of batch experiments was performed to assess the influence of resin dosage and solution pH, while adsorption kinetics were analyzed to determine the optimal contact time and the underlying rate-limiting mechanism. Equilibrium data were interpreted using adsorption isotherm models, and thermodynamic parameters (Delta G degrees, Delta H degrees, and Delta S degrees) were calculated to evaluate the feasibility and spontaneity of the process. Additionally, the effect of common coexisting ions in wastewater (Na+, K+, Mn2+, Ca2+, Mg2+) on DMP removal was examined. The optimum removal efficiency (>97%) was achieved using 0.02 g of resin per 25 mL solution at pH 2-6, with equilibrium established within 300 minutes. The adsorption behavior was best described by the Langmuir isotherm, indicating monolayer adsorption with a maximum capacity of 463.37 mg g(-1). Mechanistic evaluation revealed that pi-pi interactions and hydrogen bonding were the dominant forces driving DMP adsorption. The presence of competing cations had minimal impact, demonstrating the adsorbent's strong selectivity toward DMP. Desorption studies showed complete DMP recovery using absolute ethanol (>99%), with >99% regeneration efficiency. Optimization using Central Composite Design (CCD) under Response Surface Methodology (RSM) produced a statistically robust model (R-2 = 0.98), consistent with the experimental results. Overall, Purolite MN100 proved to be a highly efficient, selective, and regenerable adsorbent suitable for DMP removal in wastewater treatment processes.Article Citation - WoS: 7Citation - Scopus: 6Polymeric Biomaterials for Periodontal Tissue Engineering and Periodontitis(Royal Soc Chemistry, 2024) Yuruk, Gizem; Demir, Yagmur Damla; Vural, Sevra; Kehr, Nermin SedaThe periodontium is one of the most complex tissues in the body because its structure is formed by a hierarchical combination of soft and hard tissues. Due to its complex architecture, the treatment and regeneration of damaged periodontal tissue caused by diseases is still a challenge in biomedicine. The most common disease of the periodontium is periodontitis, which occurs when the periodontium becomes infected and inflamed as a bacterial biofilm forms in the mouth. Recently, various biocompatible biomaterials made of natural and synthetic polymers have been developed for periodontal tissue regeneration or treatment due to their superior properties such as controlled drug and bioactive molecule delivery, mimicking the 3D network of tissue, biocompatibility, antibacterial and mechanical properties. In particular, biomaterials designed for drug delivery, such as hydrogels, scaffolds, films, membranes, micro/nanoparticles and fibers, and additively manufactured biomaterials have undergone in vitro and in vivo testing to confirm their potential clinical utility in periodontal regeneration and periodontitis treatment. This review explores recent advances in the use of biomaterials for the prevention and/or treatment of periodontal regeneration and periodontitis. Specifically, it emphasizes advancements in drug/biomolecule delivery and the use of additively manufactured biomaterials for addressing periodontal issues.Article Citation - WoS: 2Citation - Scopus: 3Dynamic Fluidic Manipulation in Microfluidic Chips With Dead-End Channels Through Spinning: the Spinochip Technology for Hematocrit Measurement, White Blood Cell Counting and Plasma Separation(Royal Soc Chemistry, 2025) Oksuz, Cemre; Tekin, Hüseyin Cumhur; Bicmen, Can; Tekin, H. CumhurCentrifugation is crucial for size and density-based sample separation, but low-volume or delicate samples suffer from loss and impurity issues during repeated spins. We introduce the "Spinochip", a novel microfluidic system utilizing centrifugal forces for efficient filling of dead-end microfluidic channels. The Spinochip enables versatile fluid manipulation with a single reservoir for both inlet and outlet functions. It expels compressed air, facilitating fluid flow, and offers programmable filling mechanisms based on the hydraulic resistance of microfluidic channels. Compatible with a basic centrifuge, it allows sequential filling, internal mixing, and collection in straight microfluidic channels by simply adjusting the spinning speed, eliminating the need for complex valving. We demonstrated the Spinochip's efficacy in blood testing, where it successfully separated blood components, such as plasma, buffy coat, and red blood cells, from a single drop using centrifugation alone. This system enabled simultaneous hematocrit (R2 >0.99) and total white blood cell (R2 >0.93) quantification within a single microfluidic channel without the need for staining or special reagents. Remarkably, the Spinochip can perform hematocrit measurements on as little as 100 nL of blood, potentially paving the way for less invasive blood analysis. This innovative approach unlocks new possibilities in microfluidics, providing precise fluidic control and centrifugation for sample volumes as small as a few nanoliters.Article Citation - WoS: 1Citation - Scopus: 1Thickness-Dependent Characteristics and Oxidation of 2d-Cadmium(Royal Soc Chemistry, 2024) Gulucu, Arda; Sahin, HasanIn this study, the structural, electronic, and vibrational properties of the thinnest crystal structure that can be obtained by thinning bulk Cd down to a monolayer are investigated by performing first-principles calculations. Total energy optimization and dynamic stability calculations reveal that the single layer crystal structure has a hexagonal unitcell with a two-atomic basis where alternating layers are formed by trigonal arrangements of Cd atoms. Softening occurs with decreasing zone center optical phonon frequencies as a result of structural relaxation when going from a bulk to a single layer (SL) structure. It is also shown that the thinnest structure obtained from bulk Cd crystals maintains its metallic features despite the dimensional crossover. In addition, it is predicted through calculations that the SL Cd crystal strongly interacts with oxygen and that the oxidized regions even undergo chemical transformation to form a CdO crystal. In the double-layer CdO crystal resulting from the oxidation of individual Cd layers, the layers are connected to each other with partially covalent bonds, and this structure is a semiconductor with a band gap of 2.10 eV. On the one hand, the robust metallic structure of the thinnest possible Cd crystal provides flexibility for its use in nanoscale applications, on the other hand, the fact that its electronic properties can be changed by oxidation is important for optoelectronic device applications. In this study, the structural, electronic, and vibrational properties of the thinnest crystal structure that can be obtained by thinning bulk Cd down to a monolayer are investigated by performing first-principles calculations.Article Citation - WoS: 1Anisotropic Structural, Vibrational, Electronic, Optical, and Elastic Properties of Single-Layer Hafnium Pentatelluride: an <i>ab Initio</I> Study(Royal Soc Chemistry, 2024) Dogan, Kadir Can; Cetin, Zebih; Yagmurcukardes, MehmetMotivated by the highly anisotropic nature of bulk hafnium pentatelluride (HfTe<INF>5</INF>), the structural, vibrational, electronic, optical, and elastic properties of single-layer two-dimensional (2D) HfTe<INF>5</INF> were investigated by performing density functional theory (DFT)-based first-principles calculations. Total energy and geometry optimizations reveal that the 2D single-layer form of HfTe<INF>5</INF> exhibits in-plane anisotropy. The phonon band structure shows dynamic stability of the free-standing layer and the predicted Raman spectrum displays seven characteristic Raman-active phonon peaks. In addition to its dynamic stability, HfTe<INF>5</INF> is shown to exhibit thermal stability at room temperature, as confirmed by quantum molecular dynamics simulations. Moreover, the obtained elastic stiffness tensor elements indicate the mechanical stability of HfTe<INF>5</INF> with its orientation-dependent soft nature. The electronic band structure calculations show the indirect-gap semiconducting behavior of HfTe<INF>5</INF> with a narrow electronic band gap energy. The optical properties of HfTe<INF>5</INF>, in terms of its imaginary dielectric function, absorption coefficient, reflectance, and transmittance, are shown to exhibit strong in-plane anisotropy. Furthermore, structural analysis of several point defects and their oxidized structures was performed by means of simulated STM images. Among the considered vacancy defects, namely , , V<INF>Te<INF>out</INF></INF>, V<INF>Te<INF>in</INF></INF>, , and V<INF>Hf</INF>, the formation of V<INF>Te<INF>out</INF></INF> is revealed to be the most favorable defect. While and V<INF>Hf</INF> defects lead to local magnetism, only the oxygen-substituted V<INF>Hf</INF> structure possesses magnetism among the oxidized defects. Moreover, it is found that all the bare and oxidized vacant sites can be distinguished from each other through the STM images. Overall, our study indicates not only the fundamental anisotropic features of single-layer HfTe<INF>5</INF>, but also shows the signatures of feasible point defects and their oxidized structures, which may be useful for future experiments on 2D HfTe<INF>5</INF>.Article Citation - Scopus: 3A Reaction-Based Scenario for Fluorescence Probing of Au(iii) Ions in Human Cells and Plants(Royal Soc Chemistry, 2023) Eren, Merve Cevik; Eren, Ahmet; Dartar, Suay; Kaya, Beraat Umur; Ucuncu, Muhammed; Varlikli, Canan; Emrullahoglu, MustafaA BODIPY-based fluorophore decorated with a gold specific reactive handle (e.g., 2-alkynylallyl alcohol) displayed a ratiometric fluorescence change in response to Au3+ ions with extraordinary selectivity over other competing metal species, including Hg2+, Cu2+, Zn2+ and Pd2+. By way of a gold-catalyzed intramolecular cyclisation-isomerisation reaction sequence, a BODIPY construct with an extended p-conjugation transformed into a new structure with a relatively short p-system. This unique chemical transformation was accompanied by, and resulted in, a dramatic shift in the emission and absorption wavelength, which could be monitored as distinct changes in the color of the solution's emission. Apart from its outstanding analytical performance in solution, including a quick response time (<10 s), unique specificity, a high-fold ratio-metric change (62-fold), and a remarkably low detection limit (358 nM), the probe also proved useful in monitoring Au3+ ions in human cells and plants (e.g., Nicotiana benthamiana).