Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
5 results
Search Results
Article Citation - WoS: 5Citation - Scopus: 5Use of Amberlite Xad-7hp for the Separation of Mn(ii) and Mn(vii) in Waters(Pleiades Publishing, 2017) Erdem Yayayürük, Aslı; Eroğlu, Ahmet EminA simple method is proposed for the determination and speciation of Mn(II) and Mn(VII) in waters utilizing a macroporous resin, Amberlite XAD-7HP. The batch method was employed and flame atomic absorption spectrometry was used in all determinations. Amberlite XAD-7HP resin was shown to retain Mn(VII) between pH 4 and 12. If the solution contains only one of the species, either Mn(II) or Mn(VII), the resin behaves selectively depending on the pH of the solution. The elution from the sorbent was realized using K2C2O4 in HNO3. The efficiency of the method was checked via spike recovery experiments. The proposed method was successfully applied to industrial wastewater samples and quantitative recoveries (≥96.0%) confirmed the accuracy of the method.Article Citation - WoS: 2Citation - Scopus: 2Determination of Minerals and Trace Elements in Soils and the Relation With Its Concentrations in Sugar Beets(Chemical Publishing Co., 2010) Küçükbay, F. Zehra; Kuyumcu, Ebru; Karaca, İdil; Özdemir, DurmuşTwelve sugar beets and corresponding soil samples from the plantation near Malatya, Turkey were analyzed for mineral and trace element contents. Thirteen metals (Al, Ca, Cd, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Se and Zn) were selected and analyzed quantitatively by FAAS/FAES and ETAAS. Principal component analysis and hierarchical cluster analysis were used to explore samples based on the element contents. The principal component analysis analysis of sugar beet samples yielded five principal components which were able to explain about 84% of the total variance in the data set. The number of principal components that are higher than one was four for the soil samples and were able to explain 83% of total variance. Hierarchical cluster analysis of sugar beet samples and corresponding soil samples resulted in two main clusters based on the geographic regions of the samples. In terms of the elements being analyzed, the hierarchical cluster analysis method resulted in 3-4 clusters of the elements in both sugar beet and soil samples.Article Citation - WoS: 7Citation - Scopus: 8Evaluation of Dissolution Methods in the Presence of High Chloride Content for the Determination of Germanium in Geological Matrices by Hydride Generation Atomic Absorption Spectrometry(Japan Society for Analytical Chemistry, 2001) Abbasi, Husam U.; Eroğlu, Ahmet Emin; Anwari, Mohammad A.; Volkan, MürvetThe sample dissolution is probably the most crucial step in the determination of germanium in geological and metallurgical samples due to formation of volatile germanium compounds during the course of dissolution. It has been stated that this is especially true for the samples having high sulfide and/or chloride content.Article Citation - WoS: 67Citation - Scopus: 80Metal Ion Release From Tin Coated Cocrmo Orthopedic Implant Material(Elsevier Ltd., 2006) Türkan, Uğur; Öztürk, Orhan; Eroğlu, Ahmet EminIn this study, a medical grade CoCrMo alloy was coated with TiN by means of physical vapor deposition (PVD) technique at 550 °C for 6 h. The TiN layer microstructure and thickness were studied by X-ray diffraction (XRD) and cross-sectional scanning electron microscopy (SEM). The adhesive strength of the TiN coatings on the CoCrMo substrate was studied by a commercially available Scanning Scratch Tester. Static immersion test was conducted to investigate the effectiveness of TiN coating in preventing the dissolution of metal ions into the simulated body fluid (SBF) from the substrate by atomic absorption spectrometry (AAS) and inductively coupled plasma optical emission spectrometry (ICP-OES). The XRD results showed that the PVD coated TiN films exhibited (111) preferred orientation, while the SEM analysis indicated quite uniform and highly dense TiN coated layer (about 3 μm thick) with a columnar growth mode reaching from substrate to coating surface. The scratch test results showed that the adhesive strength between the TiN film and the CoCrMo substrate was adequate. The AAS and ICP-OES results showed that the presence of the TiN coating prevented the release of cobalt and chromium metal ions from the substrate CoCrMo alloy whereas cobalt was preferentially dissolved from the as-polished material. Calcium phosphate precipitation was observed on the surface of the as-polished material, indicating a degree of bioactivity of the as-polished surface which is absent in the TiN coated substrate alloy.Article Citation - WoS: 31Citation - Scopus: 32Speciation and Preconcentration of Inorganic Tellurium From Waters Using a Mercaptosilica Microcolumn and Determination by Hydride Generation Atomic Absorption Spectrometry(Royal Society of Chemistry, 2000) Körez, Aslıhan; Eroğlu, Ahmet Emin; Volkan, Mürvet; Ataman, O. YavuzA separation–preconcentration method utilising a mercapto-modified silica microcolumn was developed for the determination of trace amounts of Te(IV) and Te(VI) in waters by hydride generation atomic absorption spectrometry. Bottled drinking water, tap water and sea-water samples were spiked with sub-ng ml−1 concentrations of Te(IV) and the spiked solutions were subjected to the mercapto-modified silica microcolumn separation and enrichment procedure. The spike recovery values varied between 86 and 114%. In addition to spike recovery experiments, accuracy was also verified via the analysis of a certified reference material. The limit of detection for Te(IV) in sea-water with a preconcentration factor of 50 was 0.037 ng ml−1. The capability of the microcolumn enrichment scheme for on-line sample processing via flow manifolds was demonstrated. A detailed interference study was performed.