Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
8 results
Search Results
Review Citation - WoS: 17Citation - Scopus: 16Engineering Periodontal Tissue Interfaces Using Multiphasic Scaffolds and Membranes for Guided Bone and Tissue Regeneration(Elsevier, 2024) Özkendir, Özge; Karaca, İlayda; Çullu, Selin; Yaşar, Hüsniye Nur,; Erdoğan, Oğulcan; Dikici, Serkan; Dikici, Betul AldemirPeriodontal diseases are one of the greatest healthcare burdens worldwide. The periodontal tissue compartment is an anatomical tissue interface formed from the periodontal ligament, gingiva, cementum, and bone. This multifaceted composition makes tissue engineering strategies challenging to develop due to the interface of hard and soft tissues requiring multiphase scaffolds to recreate the native tissue architecture. Multilayer constructs can better mimic tissue interfaces due to the individually tuneable layers. They have different characteristics in each layer, with modulation of mechanical properties, material type, porosity, pore size, morphology, degradation properties, and drug-releasing profile all possible. The greatest challenge of multilayer constructs is to mechanically integrate consecutive layers to avoid delamination, especially when using multiple manufacturing processes. Here, we review the development of multilayer scaffolds that aim to recapitulate native periodontal tissue interfaces in terms of physical, chemical, and biological characteristics. Important properties of multiphasic biodegradable scaffolds are highlighted and summarised, with design requirements, biomaterials, and fabrication methods, as well as post-treatment and drug/growth factor incorporation discussed.Article Citation - WoS: 3Citation - Scopus: 6Investigation of the Influence of High-Pressure Torsion and Solution Treatment on Corrosion and Tribocorrosion Behavior of Cocrmo Alloys for Biomedical Applications(MDPI, 2023) Yılmazer, Hakan; Caha, İhsan; Dikici, Burak; Toptan, Fatih; Işık, Murat; Niinomi, Mitsuo; Nakai, Masaaki; Alves, Alexandra CruzIn this study, the influence of the high-pressure torsion (HPT) processing parameters and solution treatment (ST) on the corrosion and tribocorrosion behavior of CoCrMo (CCM) alloys was investigated for possible usage in biomedical applications. The corrosion behavior of the CCM alloys was investigated by using potentiodynamic scanning (PDS) and electrochemical impedance spectroscopy (EIS) tests. Tribocorrosion tests were carried out in a reciprocating ball-on-plate tribometer at 1 Hz, 1 N load, and 3 mm stroke length for 2 h. All electrochemical measurements were performed using a potentiostat in standard phosphate-buffered saline (PBS) solution at body temperature (37 +/- 2 degrees C). The samples were characterized by using a scanning electron microscope (SEM), transmission electron microscope (TEM), optical microscope (OM), and X-ray diffraction (XRD). The deepness and width of wear tracks were examined by using a profilometer. The results showed that HPT and ST processes did not affect significantly the corrosion resistance of samples. However, the ST-treated samples had a higher material loss during sliding in standard phosphate-buffered saline (PBS) at body temperature as compared to HPT-treated samples.Editorial Citation - WoS: 1Citation - Scopus: 1Editorial: Biomaterial Applications in Soft Tissue Engineering and Replacement(Frontiers Media S.A., 2023) Hornyak, Istvan; Jedlovszky-Hajdu, Angela; Kehr, SedaThe research related to the application of biomaterials encompasses a large area within the field of tissue engineering and regenerative medicine (TERM), and this Research Topic was dedicated to the versatile possibilities in the use of biomaterials. The sum of 10 manuscripts were submitted to this Research Topic and six were selected for this Research Topic with the contribution of 35 authors, Four of the accepted manuscripts were original research articles and two were review articlesArticle Citation - WoS: 3Citation - Scopus: 4Microfluidic-Assisted Preparation of Nano and Microscale Chitosan Based 3d Composite Materials: Comparison With Conventional Methods(Wiley, 2022) Kimna, Ceren; Değer, Sibel; Tamburacı, Sedef; Tıhmınlıoğlu, FundaAlthough nanofillers contribute to improved physical characteristics and biological functionalities of polymer-based biomaterials, their dispersion in polymer matrices is still a challenging issue in terms of obtaining consistency for the inherent properties. To tackle this problem, homogenization techniques are applied to disperse the nanofillers in such polymers, however, these methods can cause undesired changes especially in the rheological properties and the physical structure of the biopolymer matrices. Recently, as a novel homogenization technique, microfluidization has been used to homogenize polymer nanocomposites to minimize these limitations. In this study, two different nanocomposite structures as chitosan/montmorillonite (CS/MMT) and chitosan/polyhedral oligomeric silsesquioxane nanocages (CS/POSS) were homogenized with microfluidization and investigated in terms of physical alterations. Furthermore, the effect of microfluidizer technique on material characteristics was compared with conventional homogenization techniques, i.e., ultrasonic bath and sonication in terms of solution, nano – (e.g., hydrodynamic size, drug encapsulation) and macroscopic material characteristics (e.g., porosity, mechanical properties, swelling and thermal degradation). It was found that the microfluidizer homogenization improves the physical characteristics in both nano and macroscale materials: Nanospheres obtained from CS/MMT composites showed enhanced stability, uniform size distribution (<100 nm, PDI: [removed]50%) whereas 3D porous CS/POSS scaffolds showed improved structural uniformity (i.e., homogeneous and interconnected microstructure) and enhanced thermal and mechanical properties. The obtained results indicate that the microfluidizer homogenization ensures a successful nanofiller dispersion in polymer matrices, thereby improving the biomaterial characteristics impressively compared to the sonication methods.Article Citation - WoS: 14Citation - Scopus: 16Synergistic Effect of Type and Concentration of Surfactant and Diluting Solvent on the Morphology of Emulsion Templated Matrices Developed as Tissue Engineering Scaffolds(Elsevier, 2022) Claeyssens, Frederik; Aldemir Dikici, Betül; Dikici, SerkanEmulsion templating is an advantageous route for the fabrication of tissue engineering scaffolds. Emulsions are mostly stabilised using surfactants, and the performances of the surfactants depend on various parameters such as emulsification temperature and the presence of the electrolytes. In this study, we suggest that diluting solvent type also has a dramatic impact on the efficiency of the surfactant and morphology of the polymerised emulsions. For this, morphologies of polycaprolactone methacrylate-based polymerised emulsions, which are designed for tissue engineering applications and in vitro biocompatibilities, were shown by our group, prepared using four different surfactants, and three different solvents were investigated. Results showed that the diluting solvent used in the emulsion composition has a strong impact on the performance of the surfactant and consequently on the morphology of polymerised emulsions. Increasing surfactant concentration and diluting solvent volume have an opposite impact on the characteristics of emulsions. Scaffolds with average pore sizes changing from 10 to 78 μm could be fabricated. Establishing these relations enables us to have control over the overall morphology of polymerised emulsions and precisely engineer them for specific tissue engineering applications by tuning solvent and surfactant type and concentration.Article Citation - WoS: 2Citation - Scopus: 2Cloning, Expression, and Characterization of a Novel Sericin-Like Protein(Wiley, 2022) Bostan, Fatmanur; Sürmeli, Nur BaşakSilk consists of two proteins called fibroin and sericin. While fibroin is used in the textile industry and has various biomaterial applications, sericin has been considered as waste material until recently. Sericin is a multicomponent protein and it has important properties such as biocompatibility, biodegradability, cryoprotectivity, and antioxidant. Sericin from silkworm cocoons can be obtained by chemical, enzymatic, and heat treatment methods. However, sericin obtained with these treatment methods is not of consistent and high quality. Moreover, the exposure of sericin to harsh conditions during extraction leads to inconsistencies in the composition and structure of the sericin obtained. The inconsistencies in sericin structure and composition decrease application of sericin as a biomaterial. Here, we produce a sericin-like protein (Ser4mer) with native sequence of sericin encoding four repeats of the conserved 38 amino acid motif recombinantly in Escherichia coli and characterize its structural properties. Ser4mer protein shows similar structure to native sericin and higher solubility than previously obtained recombinant sericin-like proteins. Recombinant production of a soluble sericin-like protein will significantly expand its applications as a biomaterial. In addition, recombinant production of silk proteins will allow us to understand sequence-structure relationships in these proteins.Article Determination of the Effects of Biomaterials on Human Peripheral Blood Mononuclear Cells (pbmc)(IOS Press, 2002) Sudağıdan, Mert; Güneş, Hatice; Harsa, ŞebnemArticle Citation - WoS: 62Citation - Scopus: 72Diatomite Reinforced Chitosan Composite Membrane as Potential Scaffold for Guided Bone Regeneration(Elsevier Ltd., 2017) Tamburacı, Sedef; Tıhmınlıoğlu, FundaIn this study, natural silica source, diatomite, incorporated novel chitosan based composite membranes were fabricated and characterized for bone tissue engineering applications as possible bone regeneration membrane. The effect of diatomite loading on the mechanical, morphological, chemical, thermal and surface properties, wettability and in vitro cytotoxicity and cell proliferation on of composite membranes were investigated and observed by tensile test, atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), protein adsorption assay, air/water contact angle analysis and WST-1 respectively. Swelling studies were also performed by water absorption capacity determination. Results showed that incorporation of diatomite to the chitosan matrix increased the surface roughness, swelling capacity and tensile modulus of membranes. An increase of about 52% in Young's modulus was achieved for 10 wt% diatomite composite membranes compared with chitosan membranes. High cell viability results were obtained with indirect extraction method. Besides, in vitro cell proliferation and ALP activity results showed that diatom incorporation significantly increased the ALP activity of Saos-2 cells cultured on chitosan membranes. The novel composite membranes prepared in the present study with tunable properties can be considered as a potential candidate as a scaffold in view of its enhanced physical & chemical properties as well as biological activities for bone tissue engineering applications.