Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
16 results
Filters
Settings
Search Results
Article Citation - WoS: 7Citation - Scopus: 7Investigating the Effects of Pa66 Electrospun Nanofibers Layered Within an Adhesive Composite Joint Fabricated Under Autoclave Curing(American Chemical Society, 2023) Esenoğlu, Gözde; Tanoğlu, Metin; Barışık, Murat; İplikçi, Hande; Yeke, Melisa; Nuhoğlu, Kaan; Türkdoğan, Ceren; Martin, Seçkin; Aktaş, Engin; Dehneliler, Serkan; Gürbüz, Ahmet Ayberk; İriş, Mehmet ErdemEnhancing the performance of adhesively joined composite components is crucial for various industrial applications. In this study, polyamide 66 (PA66) nanofibers produced by electrospinning were coated on unidirectional carbon/epoxy prepregs to increase the bond strength of the composites. Carbon/epoxy prepregs with/without PA66 nanofiber coating on the bonding region were fabricated using the autoclave, which is often used in the aerospace industry. The single lap shear Charpy impact energy and Mode-I fracture toughness tests were employed to examine the effects of PA66 nanofibers on the mechanical properties of the joint region. Scanning electron microscopy (SEM) was used to investigate the nanofiber morphology and fracture modes. The thermal characteristics of Polyamide 66 nanofibers were explored by using differential scanning calorimetry (DSC). We observed that the electrospun PA66 nanofiber coating on the prepreg surfaces substantially improves the joint strength. Results revealed that the single lap shear and Charpy impact strength values of the composite joint are increased by about 79 and 24%, respectively, by coating PA66 nanofibers onto the joining region. The results also showed that by coating PA66 nanofibers, the Mode-I fracture toughness value was improved by about 107% while the glass transition temperature remained constant.Article Citation - WoS: 8Citation - Scopus: 9Development of Plant-Based Biopolymer Coatings for 3d Cell Culture: Boron-Silica Quince Seed Mucilage Nanocomposites(Royal Society of Chemistry, 2023) Yılmaz, Hilal Deniz; Cengiz, Uğur; Derkuş, Burak; Arslan, Yavuz EmreSpheroid formation with spontaneous aggregation has captured interest in most cell culture studies due to its easy set-up and more reliable results. However, the economic and technical costs of the advanced systems and commercial ultra-low adhesive platforms have pushed researchers into pursuing alternatives. Nowadays, polymeric coatings, including poly-hydroxyethyl methacrylate and agar/agarose, are the commonly used polymers for non-adhesive plate fabrication, yet the costs and working solvent or heat-dependent preparation procedures maintain the need for the development of novel biomaterials. Here, we propose a greener and more economical approach for producing non-adherent surfaces and spheroid formation. For this, a plant waste-based biopolymer from quince fruit (Cydonia oblonga Miller, from Rosaceae family) seeds and boron-silica precursors were introduced. The unique water-holding capacity of quince seed mucilage (Q) was enriched with silanol and borate groups to form bioactive and hydrophilic nanocomposite overlays for spheroid studies. Moreover, 3D gel plates from the nanocomposite material were fabricated and tested in vitro as a proof-of-concept. The surface properties of coatings and the biochemical and mechanical properties of the nanocomposite materials were evaluated in-depth with techniques, and extra hydrophilic coatings were obtained. Three different cell lines were cultured on these nanocomposite surfaces, and spheroid formation with increased cellular viability was recorded on day 3 with a >200 & mu;m spheroid size. Overall, Q-based nanocomposites are believed to be a fantastic alternative for non-adherent surface fabrication due to their low-cost, easy operation, and intrinsic hydration layer forming capacity with biocompatible nature in vitro.Article Citation - WoS: 62Citation - Scopus: 72Diatomite Reinforced Chitosan Composite Membrane as Potential Scaffold for Guided Bone Regeneration(Elsevier Ltd., 2017) Tamburacı, Sedef; Tıhmınlıoğlu, FundaIn this study, natural silica source, diatomite, incorporated novel chitosan based composite membranes were fabricated and characterized for bone tissue engineering applications as possible bone regeneration membrane. The effect of diatomite loading on the mechanical, morphological, chemical, thermal and surface properties, wettability and in vitro cytotoxicity and cell proliferation on of composite membranes were investigated and observed by tensile test, atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), protein adsorption assay, air/water contact angle analysis and WST-1 respectively. Swelling studies were also performed by water absorption capacity determination. Results showed that incorporation of diatomite to the chitosan matrix increased the surface roughness, swelling capacity and tensile modulus of membranes. An increase of about 52% in Young's modulus was achieved for 10 wt% diatomite composite membranes compared with chitosan membranes. High cell viability results were obtained with indirect extraction method. Besides, in vitro cell proliferation and ALP activity results showed that diatom incorporation significantly increased the ALP activity of Saos-2 cells cultured on chitosan membranes. The novel composite membranes prepared in the present study with tunable properties can be considered as a potential candidate as a scaffold in view of its enhanced physical & chemical properties as well as biological activities for bone tissue engineering applications.Article Citation - WoS: 108Citation - Scopus: 117Enhancement of Interlaminar Fracture Toughness of Carbon Fiber–epoxy Composites Using Polyamide-6,6 Electrospun Nanofibers(John Wiley and Sons Inc., 2017) Beylergil, Bertan; Tanoğlu, Metin; Aktaş, EnginIn this study, carbon fiber–epoxy composites are interleaved with electrospun polyamide-6,6 (PA 66) nanofibers to improve their Mode-I fracture toughness. These nanofibers are directly deposited onto carbon fabrics before composite manufacturing via vacuum infusion. Three-point bending, tensile, compression, interlaminar shear strength, Charpy impact, and double cantilever beam tests are performed on the reference and PA 66 interleaved specimens to evaluate the effects of PA 66 nanofibers on the mechanical properties of composites. To investigate the effect of nanofiber areal weight density (AWD), nanointerlayers with various AWD are prepared by changing the electrospinning duration. It is found that the electrospun PA 66 nanofibers are very effective in improving Mode-I toughness and impact resistance, compressive strength, flexural modulus, and strength of the composites. However, these nanofibers cause a decrease in the tensile strength of the composites. The glass-transition temperature of the composites is not affected by the addition of PA 66 nanofibers. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 45244.Article Citation - WoS: 2Citation - Scopus: 3Evaluation of Boron Industrial Solid Waste in Composite Materials(Taylor and Francis Ltd., 2018) Topaloğlu Yazıcı, Demet; Çetinkaya, HayrullahBoron industrial solid waste is used as reinforcement for preparing composite materials. This waste has boron trioxide which holds unique properties may affect the surface or interface of the composite. The prepared composites are characterized in order to determine the dispersion and the structure by means of inverse gas chromatography (IGC), Fourier transform infrared spectroscopy, thermal gravimetric analysis, scanning electron microscopy (SEM) and X-ray diffraction (XRD). There is a strong relation between the dispersion of reinforcement and the properties of newly formed composite. The dispersive component of the surface energies of the composites and components are determined by IGC. This parameter is difficult to measure by other methods and it is related to the wettability and adhesive characters of solid materials. The effect of compounding ratios of reinforcement is also examined. Furthermore, XRD diffractograms and SEM images of composites showed well dispersion. Thermal analysis revealed that the addition of the boron industrial solid waste to the polymer increased the thermal stability of pure polymer. Infrared spectra of the composites indicated that the composites were formed from the waste reinforcement and the polymer matrix.Article Citation - WoS: 73Citation - Scopus: 77Zinc Oxide and Zinc Hydroxide Formation Via Aqueous Precipitation: Effect of the Preparation Route and Lysozyme Addition(Elsevier Ltd., 2015) Top, Ayben; Çetinkaya, HayrullahAqueous precipitation products of Zn(NO3)2 and NaOH obtained by changing the method of combining the reactants and by using lysozyme as an additive were investigated. In the case of single addition method, octahedral ε-Zn(OH)2 and plate-like β-Zn(OH)2 structures formed in the absence and in the presence of lysozyme, respectively. Calcination of these Zn(OH)2 samples at 700 °C yielded porous ZnO structures by conserving the template crystals. When zinc source was added dropwise into NaOH solution, predominantly clover-like ZnO crystals were obtained independent of lysozyme addition. Mixed spherical and elongated ZnO morphology was observed when NaOH was added dropwise into Zn(NO3)2 solution containing lysozyme. Lysozyme contents of the precipitation products were estimated as in the range of ∼5-20% and FTIR indicated no significant conformational change of lysozyme in the composite. These results suggest that lysozyme-ZnO/Zn(OH)2 composite materials may have a value as an antibacterial material.Conference Object Citation - Scopus: 1Silver and Zinc Oxide Based Nano Powders and Their Polymer Based Nanocomposites for Antibacterial Application(European Conference on Composite Materials, 2014) Abatay, Ezgi; Özmen, Tuğçe; Arslanoğlu, Alper; Tanoğlu, MetinThe microorganisms cause some serious infections. It is a requirement and a necessity to create sterile fields such as hospital, food processing and public places. Composite stones are one of the main building materials that have been used in buildings due to their high resistant to abrasives, chemicals and mechanical impacts. The silver (Ag), zinc oxide (ZnO), and also nano Ag loaded ZnO (ZnO/Ag) nanopowders have demonsrated capability for the preparation of the polymer based antibacterial nanocomposite materials. In this study, Ag/polyester, ZnO/polyester, Ag/ZnO/polyester and their nanocomposites were prepared and tested with various weight fractions. The microstructure and surface morphology of these nanocomposites were investigated by means of scanning electron microscopy (SEM/EDX). The thermal properties were analyzed by differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). Finally, The antibacterial properties of nanocomposites were analyzed against gram positive (Bacillus subtilis) and gram negative bacteria (Escherichia coli).Article Citation - WoS: 25Citation - Scopus: 25Characterization Investigations During Mechanical Alloying and Sintering of W-20 Vol% Sic Composites(Elsevier Ltd., 2010) Coşkun, Selim; Öveçoğlu, M. Lütfi; Özkal, Burak; Tanoğlu, MetinThe effect of mechanical alloying and the sintering regime on the microstructural and the physical properties of W-SiC composites were investigated. Powder mixtures of W-20 vol.% SiC were mechanically alloyed (MA'd) using a Spex mill for 3 h, 6 h and 24 h. MA'd powders were characterized by Laser Diffraction Particle Size Analyzer, SEM and XRD investigations. MA'd W-20 vol.% SiC powder composites were sintered under inert Ar and reducing H2 gas conditions at 1680 °C and 1770 °C for 1 h. The microstructural and mechanical characterizations of the sintered samples were carried out by scanning electron microscope (SEM) and X-ray diffraction (XRD) and Vickers Hardness analyses. The addition of SiC remarkably increases the hardness of the composites. Hardness is also increased with decreasing grain size and increasing amount of MA. © 2009 Elsevier B.V. All rights reserved.Article Citation - WoS: 14Citation - Scopus: 15Analytical Investigation of a Novel Interrogation Approach of Fiber Bragg Grating Sensors Using Optical Frequency Domain Reflectometry(Elsevier Ltd., 2016) Yüksel, Kıvılcım; Pala, DenizThis work presents a novel approach in interrogating Polarization Dependent Loss (PDL) of cascaded identical FBGs using Optical Frequency Domain Reflectometer (OFDR). The fundamentals of both polarisation properties of uniform FBGs and polarisation-sensitive OFDR are explained and the benefits of this novel approach in measuring transversal load are discussed. The numerical programs computing the spectral evolution of PDL of the FBGs in the array as a function of grating parameters (grating length and birefringence) are presented. Our simulation results show an excellent agreement with the previously reported simulation (and experimental) results in the literature obtained on a single FBG by using classical state-of-the-art measurement techniques. As an envisaged application, the proposed system shows the feasibility of measuring the residual stresses during manufacturing process of composite materials which is not straightforward by amplitude spectrum measurements and/or considering only the axial strains. © 2016 Elsevier Ltd. All rights reserved.Article Citation - WoS: 17Citation - Scopus: 20Numerical and Experimental Studies of Damage Generation in a Polymer Composite Material at High Strain Rates(Elsevier Ltd., 2006) Taşdemirci, Alper; Hall, Ian W.Samples of S2-glass/epoxy composites have been subjected to microstructural investigation after testing in compression at quasi-static and high strain rates using the split Hopkinson pressure bar. A numerical model was developed that accurately describes the high strain rate mechanical response of the samples. Moreover, in contrast with earlier phenomenological or constitutive models, the model can also predict a variety of failure modes such as delamination, matrix cracking or fiber crushing. High-speed photography was used to check the model results. Interrupted tests, followed by metallographic examination, have revealed that the sequence of damage events differs between quasi-static and high strain rate regimes. The effect of sample size on measured mechanical properties is noted and is confirmed via numerical modeling.