Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
6 results
Search Results
Article Citation - WoS: 24Citation - Scopus: 29Hydrophobic Coatings From Photochemically Prepared Hydrophilic Polymethacrylates Via Electrospraying(John Wiley and Sons Inc., 2017) Işık, Tuğba; Demir, Mustafa Muammer; Aydoğan, Cansu; Çiftçi, Mustafa; Yağcı, YusufLinear poly(hydroxyethyl methacrylate-co-methyl methacrylate) P(HEMA-co-MMA) and poly(dimehylaminoethyl methacrylate-co-methyl methacrylate) P(DMAEMA-co-MMA) and their corresponding hyperbranched copolymers were synthesized by conventional photoinitiated free radical polymerization and self-condensing vinyl polymerization (SCVP) using Type I and Type II photoinitiators, respectively. Then, the polymers were processed by electrospraying in N, N-dimethylformamide. The surface of the resulting electrospray coatings was examined by SEM, XPS, and WCA then compared with those prepared by drop casting. Regardless of the structural nature of the polymers, electrospraying allows the preparation of rough surface that shows more hydrophobic behavior. Electrospray coatings with linear and hyperbranched copolymers exhibited WCA as ∼150° and ∼130°, respectively, indicating that branching reduces the WCA.Article Citation - WoS: 195Optical Properties of Composites of Pmma and Surface-Modified Zincite Nanoparticles(American Chemical Society, 2007) Demir, Mustafa Muammer; Koynov, Kaloian; Akbey, Ümit; Bubeck, Christoph; Park, Insun; Lieberwirth, Ingo; Wegner, GerhardLocate full-text(opens in a new window)|Full Text(opens in a new window)|View at Publisher| Export | Download | Add to List | More... Macromolecules Volume 40, Issue 4, 20 February 2007, Pages 1089-1100 Optical properties of composites of PMMA and surface-modified zincite nanoparticles (Article) Demir, M.M.a, Koynov, K.a, Akbey, Ü.a, Bubeck, C.a, Park, I.ab, Lieberwirth, I.a, Wegner, G.a a Max Planck Institute for Polymer Research, Ackermannweg 10, D-55128 Mainz, Germany b Seoul National University, School of Chemistry, Korea, South Korea View references (65) Abstract Composites that show visible light transmittance, UV absorption, and moderately high refractive index, based on poly(methyl methacrylate) (PMMA) and zinc oxide (zincite, ZnO) nanoparticles, were prepared in two steps. First, surface-modified ZnO nanoparticles with 22 nm average diameter were nucleated by controlled precipitation via acid-catalyzed esterification of zinc acetate dihydrate with pentan-1-ol. The surface of growing crystalline particles was modified with tert-butylphosphonic acid (tBuPO3H2) in situ by monolayer coverage. Particle size and graft density of -PO3H 2 on the particle surface were controlled by the amount of surfactant applied to the reaction solution. Second, the surface-modified particles were incorporated into PMMA by in-situ bulk polymerization. Free radical polymerization was carried out in the presence of these particles using AIBN as initiator. Volume fraction (0) of the particles was varied from 0.10 to 7.76% (0.5 to 30 wt %). Although the particles are homogeneously dispersed in monomer, segregation of the individual particles upon polymerization was observed. Optical constants of the films ca. 2.0 μm including absorption and scattering efficiencies, indices of refraction, and dispersion constants were determined. The absorption coefficient at 350 nm increases linearly with ZnO, obeying Beer's law at low particle contents. However, it levels off toward a value of about 5000 cm-1 and shows a negative deviation at high concentrations because of aggregation of the individual particles. Waveguide propagation loss coefficients of the composite films were examined by prism coupling. A steep increase of the loss coefficient was found with a slope of 52 dB cm-1 vol %-1 as the volume fraction of the particle increases. The refractive index of the composites depends linearly on volume fraction of ZnO and varies from 1.487 to 1.507 (φ = 7.76%) at 633 nm. The dispersion of refractive index was found to be consistent with Cauchy's formula.Article Citation - WoS: 69In-Situ Bulk Polymerization of Dilute Particle/Mma Dispersions(American Chemical Society, 2007) Demir, Mustafa Muammer; Castignolles, Patrice; Akbey, Ümit; Wegner, GerhardComposites of poly(methyl methacrylate) and various nanoscale inorganic particles (zinc oxide, titanium dioxide, zirconium dioxide, silicon dioxide, and aluminum nitride) were prepared by in-situ bulk polymerization using 2,2′-azobis(isobutyronitrile) as initiator. The particles of ZnO, TiO 2, and ZrO2 were surface-modified by alkylphosphonic acids to render them dispersible in the monomer. The effect of these nanoparticles on the free radical polymerization was investigated. Regardless of chemical nature and size, the particles suppress the autoacceleration which would otherwise occur in the bulk free-radical polymerization of methyl methacrylate (MMA). A degenerative chain transfer is proposed to take place between surface-adsorbed water on the particles and propagating chain radicals. This reaction competes with normal termination. Formation of vinylidene chains ends originating from disproportionation is suppressed. In consequence, thermal stability of PMMA produced in the presence of particles is improved. Aggregation of individual particles upon polymerization has been observed and presumably is due to interparticle depletion attraction, even though the particles are individually dispersed in the monomer. Formation of particle clusters is suppressed when a difunctional monomer (e.g., ethylene glycol dimethacrylate) is used as comonomer. The cross-linked medium slows down the diffusion of the particles and therefore interferes with particle aggregation via a depletion mechanism.Article Citation - WoS: 185Pmma/Zinc Oxide Nanocomposites Prepared by In-Situ Bulk Polymerization(John Wiley and Sons Inc., 2006) Demir, Mustafa Muammer; Memesa, Mine; Castignolles, Patrice; Wegner, GerhardDispersing surface-modified zinc oxide nano-particles (ZnO) in methyl methacrylate (MMA) improves the free radical bulk polymerization process as well as the thermal stability of the formed polymer. Hydroxy groups available on the ZnO surface may induce a degenerative transfer. This suppresses the gel effect, which leads to a better control of the heat evolution during the late stages of polymerization. The formation of chains having vinylidene end groups and head-to-head links is suppressed, which shifts the onset of thermal decomposition to the regime where decomposition occurs by random chain scission.Article Citation - WoS: 5Citation - Scopus: 6Tailored Ceo2 Nanoparticles Surface in Free Radical Bulk Polymerization of Methyl Methacrylate(American Chemical Society, 2013) Tunusoğlu, Özge; Demir, Mustafa MuammerPolymerization of monomer/nanoparticle dispersion, namely in situ polymerization, has been frequently used for the fabrication of polymer nanocomposites. However, the interference of nanoparticle surface with polymerization in the course of composite formation has been tacitly neglected. In this work, surface-functionalized ceria nanoparticles were prepared using various capping agents: 3-(mercaptopropyl) trimethoxy silane, thioglycolic acid, 3-mercaptopropionic acid, and hexadecyltrimethyl ammonium bromide. Both in situ and ex situ approaches were applied for surface functionalization. The particles were dispersed into methyl methacrylate and free radical polymerization was carried out. The process of nanocomposite formation was examined in terms of conversion, molecular weight, and molecular weight distribution. The polymerization responded merely to the in situ functionalized particles. Regardless of the capping agents used, the particles function as a retarder and inhibitor. Their interaction with polymerization medium showed many complexities such that molecular weight was found to be strongly dependent on the capping agent employed.Article Citation - WoS: 51Citation - Scopus: 53Challenges in the Preparation of Optical Polymer Composites With Nanosized Pigment Particles: a Review on Recent Efforts(John Wiley and Sons Inc., 2012) Demir, Mustafa Muammer; Wegner, GerhardBlends of nanosized pigment particles and polymers are widely believed to offer the potential for the design of novel or at least improved materials. This review critically evaluates the recent literature with regard to the following issues: (a) why and how does the size of the particles matter, (b) what are the requirements to create compatibility between amorphous polymers and nanoparticles, (c) carbon allotropes as nanosized pigments, (d) bulk polymerization of monomer/pigment mixtures, (e) interaction of growing chains with the particles in the polymerization, (f) depletion flocculation as a mechanism to counteract homogeneous distribution of the particles in the polymer matrix and ways to suppress the undesirable flocculation, and (g) optical properties of the blends as well as methods of optical characterization.