Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
7 results
Search Results
Article Citation - WoS: 1Citation - Scopus: 2A Molecularly Imprinted Polymer as Solid Phase Extraction Sorbent for Ketoprofen Determination in Water and Artificial Serum Prior To Hplc(TÜBİTAK - Türkiye Bilimsel ve Teknolojik Araştırma Kurumu, 2022) Shahwan, Talal; Gürel Özyurt, Elif; Özyurt, Ömer; Ölçer, Yekta Arya; Eroğlu, Ahmet Emin; Boyacı, EzelKetoprofen (KET) is an active pharmaceutical compound that has pain relieving and antipyretic effects. Its determination in body fluids and environmental waters is important due to widespread use of the compound. In this study, a selective and reliable method has been developed for the determination of ketoprofen in water and artificial serum using molecularly imprinted polymers (MIPs) as a solid phase extraction sorbent prior to HPLC-DAD detection. The MIP was synthesized by copolymerization of methacrylic acid (MAA) and trimethylpropane trimethacrylate (TRIM) in the presence of ketoprofen as the template. For the sake of comparison, nonimprinted polymer (NIP) was also synthesized under the same experimental conditions without the addition of ketoprofen under the same experimental conditions. Critical extraction parameters such as sample pH, shaking time and sorbent amount were optimized and adjusted to 8.0, 24 h, and 10.0 mg, respectively, for a sample volume of 10.0 mL. MIP showed higher selectivity than NIP towards ketoprofen in an artificial matrix containing another pain relieving drug, ibuprofen, and a cardiovascular drug, metoprolol. The proposed method was successfully applied for the detection of ketoprofen in spiked drinking water, tap water, and artificial serum samples, and showed satisfactory results with respective recoveries of 96.8 % (± 0.8), 93.7% (± 0.6), 62.2% (± 0.6), and 69.9% (± 0.6).Article Citation - WoS: 7Citation - Scopus: 8Evaluation of Dissolution Methods in the Presence of High Chloride Content for the Determination of Germanium in Geological Matrices by Hydride Generation Atomic Absorption Spectrometry(Japan Society for Analytical Chemistry, 2001) Abbasi, Husam U.; Eroğlu, Ahmet Emin; Anwari, Mohammad A.; Volkan, MürvetThe sample dissolution is probably the most crucial step in the determination of germanium in geological and metallurgical samples due to formation of volatile germanium compounds during the course of dissolution. It has been stated that this is especially true for the samples having high sulfide and/or chloride content.Article Citation - WoS: 20Citation - Scopus: 24Preparation and Characterization of Sodium Dodecyl Sulfate Doped Polypyrrole Solid Phase Micro Extraction Fiber and Its Application To Endocrine Disruptor Pesticide Analysis(Elsevier Ltd., 2013) Korba, Korcan; Pelit, Levent; Okçu Pelit, Füsun; Özdokur, K. Volkan; Ertaş, Hasan; Eroğlu, Ahmet Emin; Ertaş, Fatma NilA robust in house solid-phase micro extraction (SPME) surface has been developed for the headspace (HS)-SPME determination of endocrine disruptor pesticides, namely, Chlorpyrifos, Penconazole, Procymidone, Bromopropylate and Lambda-Cyhalothrin in wine sample by using sodium dodecylsulfate doped polypyrrole SPME fiber. Pyrrole monomer was electrochemically polymerized on a stainless steel wire in laboratory conditions in virtue of diminishing the cost and enhancing the analyte retention on its surface to exert better selectivity and hence the developed polymerized surface could offer to analyst to exploit it as a fiber in headspace SPME analysis. The parameters, mainly, adsorption temperature and time, desorption temperature, stirring rate and salt amount were optimized to be as 70°C and 45min, 200°C, 600rpm and 10gL-1, respectively. Limit of detection was estimated in the range of 0.073-1.659ngmL-1 for the pesticides studied. The developed method was applied in to red wine sample with acceptable recovery values (92-107%) which were obtained for these selected pesticides.Article Citation - WoS: 16Citation - Scopus: 19Application of Experimental Design on Determination of Aluminum Content in Saline Samples by Adsorptive Cathodic Stripping Voltammetry(TUBITAK, 2013) Yılmaz, Sinan; Öztürk, Betül; Özdemir, Durmuş; Eroğlu, Ahmet Emin; Ertaş, Fatma NilAdsorptive cathodic stripping voltammetric determination of aluminum at ng mL-1 levels in salt samples based on the metal complexation with Calcon (1-(2-hydroxynaphthylazo)-2 naphthol-4-sulfonic acid) and the subsequent adsorptive deposition onto a hanging mercury drop electrode was studied. Central composite design was used as a design method. Several chemical and instrumental parameters (pH, ligand concentration, deposition time, deposition potential, and complexing time) were involved in the experimental design. Analytical parameters such as repeatability, linearity, and accuracy were also investigated and the detection limit was found as 0.32 ng mL-1.Article Citation - WoS: 21Citation - Scopus: 21Retention of Aqueous Ba2+ Ions by Calcite and Aragonite Over a Wide Range of Concentrations: Characterization of the Uptake Capacity, and Kinetics of Sorption and Precipitate Formation(The Geochemical Society of Japan, 2007) Tunusoğlu, Özge; Shahwan, Talal; Eroğlu, Ahmet EminThe uptake of aqueous Ba2+, ions by abiogenic calcite and aragonite was studied over a wide range of concentration; 1.0 × 101, 5.0 × 101, 1.0 × 102 5.0 × 102, 1.0 × 103, 5.0 × 104, and 1.0 × 104 mg/L. The uptake process was characterized using ICP-AES, XRPD, SEM/EDS, and FTIR techniques. Up to the initial concentration of 5.0 × 102 mg/L, the uptake of Ba2+ ions was fast and obeyed Lagergren's kinetic model. The equilibrium data were adequately described using Freundlich isotherm model. The overgrowth of BaCO3 (witherite) took place at higher concentrations, in a kinetically slow process and enhanced the uptake of Ba2+ ions. Quantitative XRPD was used to evaluate the fractions of precipitated BaCO3 on calcite and aragonite minerals and monitor their variation with time. At all the studied concentrations, aragonite showed higher removal capacity of Ba2+ and faster uptake kinetics than did calcite. The precipitated crystals appeared to predominantly possess olivary-like morphology with an average particle size of 1-2 μm. EDS was used to reveal the elemental quantities of Ba and Ca after BaCO3 formation on calcite and aragonite surfaces. FTIR spectroscopy was employed to analyze the vibrational modes in carbonate mixtures upon incorporation of Ba2+ by sorption and precipitation mechanisms.Article Citation - WoS: 19Citation - Scopus: 21Kinetic and Thermodynamic Investigations of Strontium Ions Retention by Natural Kaolinite and Clinoptilolite Minerals(Walter De Gruyter Gmbh, 2005) Akar, Dilek; Shahwan, Talal; Eroğlu, Ahmet EminThe current study was devoted to the determination of various thermodynamic and kinetic parameters resulting from the fixation of Sr2+ by natural samples of kaolinite and clinoptilolite minerals. The sorption process followed pseudo second order kinetics, with faster sorption on kaolinite compared to clinoptilolite, where the uptake is affected by intraparticle diffusion. Freundlich and Dubinin-Radushkevich isotherm models described the data more adequately than Langmuir model, and clinoptilolite showed a higher strontium sorption capacity than kaolinite. Thermodynamically, the activation energy of Sr2+ sorption by kaolinite and clinoptilolite were respectively, -8.5 and -18.4 kJ/mol. The sorption process on both minerals was spontaneous and endothermic at all the studied concentrations, with ΔH° being 11.3 and 9.8 kJ/mol, for sorption on kaolinite and clinoptilolite, respectively. The findings of this study were compared with those of an earlier study on the uptake of Cs+ by the same minerals.Article Citation - WoS: 14Citation - Scopus: 15Chitosan-Immobilized Pumice for the Removal of As(v) From Waters(Springer Verlag, 2014) Turan, Dilek; Kocahakimoğlu, Cemre; Boyacı, Ezel; Sofuoğlu, Sait Cemil; Eroğlu, Ahmet EminA novel sorbent, chitosan-immobilized pumice, has been prepared for the sorption of As(V) from waters prior to its determination by hydride generation atomic absorption spectrometry. The success of the immobilization has been checked with such characterization techniques as scanning electron microscopy, thermal gravimetric analysis, and elemental analysis. Points of zero charge of the sorbents were determined with potentiometric mass titration. Batch-type equilibration studies have shown that the novel sorbent can be employed at a wide pH range resulting in quantitative sorption (>90 %) at pH 3.0-7.0 and greater than 70 % sorption at pH >8.0. These results demonstrate the advantage of immobilizing chitosan onto pumice, because, under the same conditions, pumice displays <20 % sorption toward As(V), whereas chitosan gives approximately 90%sorption only at pH 3.0. The validity of the method was verified through the analysis of ultrapure, bottled drinking, and tap water samples spiked with arsenate; the respective sorption percentages of 93.2 (±0.7), 89.0 (±1.0), and 80.9 (±1.3) were obtained by batch-type equilibration. Arsenic sorption was also examined in the presence of common interfering ions resulting in competing effects of PO3- 4 and NO- 3on As(V) adsorption.