Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
6 results
Search Results
Article Citation - WoS: 5Citation - Scopus: 6Formation of Monolithic Srtio3-Tio2 Ceramic Heterostructures by Reactive Hydrothermal Sintering(Elsevier, 2023) Karacasulu, Levent; Kartal, Uğur; İçin, Öykü; Bortolotti, Mauro; Biesuz, Mattia; Ahmetoğlu, Çekdar VakıfIn a one-pot approach, monolithic SrTiO3-TiO2 ceramic heterostructures were obtained using the reactive hydrothermal liquid phase densification (rHLPD). Structural, morphological, and photocatalytic properties of the obtained ceramics were analyzed. The relative density of the formed components reached about 80% with reaction time, temperature, and NaOH concentration variation. It was observed via Rietveld refinement that there was no XRD detectable phase other than TiO2 and SrTiO3 in the final structure. The monolithic SrTiO3-TiO2 ceramics obtained by hydrothermal reaction at 120 °C for 24 h in 1 M NaOH concentration showed a dielectric constant being around 500, and the dielectric loss was below 0.25 at frequencies higher than 10 kHz. The SrTiO3-TiO2 heterostructured monoliths having only 20 vol% total porosity and low specific surface area, demonstrated ∼60% efficiency (in 5 h) in degrading Methylene Blue photo-catalytically. © 2023 Elsevier LtdArticle Citation - WoS: 28Citation - Scopus: 33Cold Sintering as a Promising Isru Technique: a Case Study of Mars Regolith Simulant(Elsevier, 2023) Karacasulu, Levent; Karl, David; Gurlo, Aleksander; Ahmetoğlu, Çekdar VakıfMars regolith simulant (MGS-1) was densified for the first time via a cold sintering process (CSP) as a novel in-situ resource utilization (ISRU) concept. The technique comprises the utilization of NaOH solution as a liquid media during the densification of simulant powder with <100 μm particle size. In as short as 30 min, with the increase in the NaOH concentration (from 3 M to 10 M) and processing temperature (from 150 °C to 250 °C), the relative densities of the regolith compacts and the mechanical properties were enhanced. The artifacts produced with Mars regolith simulant powder at 250 °C using 10 M NaOH solution yielded a relative density of around 88% and compressive strength reaching ∼45 MPa.Article Citation - WoS: 7Citation - Scopus: 7Hydrothermal Synthesis of Potassium–sodium Niobate Powders(Wiley, 2022) Pişkin, Cerem; Karacasulu, Levent; Ischia, Gloria; Bortolotti, Mauro; Ahmetoğlu, Çekdar VakıfPotassium–sodium niobates (KxNa1−xNbO3, 0 < x < 1, KNN) were hydrothermally synthesized under varying alkaline ratios (K+/Na+), total hydroxide concentration, reaction temperature, and time. Compositional surveys were developed by using Rietveld analyses derived quantitative volume fractions. The data demonstrated that phase pure KNN synthesis can be achieved by reacting the niobium source with the hydroxide solution having 6 M total hydroxide concentration, cation ratio (K+/Na+) of above 6 at temperatures ≥200°C for 24 h. Dissolution–precipitation events through intermediate products including hexaniobates were postulated as a plausible formation mechanism. It was shown also that the single-phase KNN approaching the morphotropic phase boundary (MPB) could be obtained by further incorporation of sodium ions into the crystal via post-annealing at 800°C/2 h, following the hydrothermal synthesis.Article Citation - WoS: 23Citation - Scopus: 23Cold Sintering of Soda-Lime Glass(Elsevier Ltd., 2021) Karacasulu, Levent; Ögür, Ezgi; Pişkin, Cerem; Vakıfahmetoğlu, ÇekdarOrdinary recycled soda lime glass powder was densified via cold sintering process with the aid of concentrated NaOH solution. Increase in processing time, temperature and concentration of the NaOH solution resulted in the formation of monolithic glass artifacts with higher relative densities. The sample densified the most (95.2%) was obtained when the sintering was performed at 250˚C with a 20 min dwell time using 15 M NaOH solution.Article Citation - WoS: 103Citation - Scopus: 110Cold Sintering of Ceramics and Glasses: a Review(Elsevier Ltd., 2020) Ahmetoğlu, Çekdar Vakıf; Karacasulu, LeventTraditionally ceramic artifacts are processed at high temperatures (> 1000 degrees C) by classical sintering techniques such as solid state, liquid phase and pressure-assisted sintering. Recently, inspired from the geology, novel sintering approaches that allow the densification of ceramic components at relatively low temperatures <= 400 degrees C have been proposed. While initial efforts for such low temperature densification concept were developed in the mid-70s, the topic has become increasingly prominent in the last decade. Currently, these low temperature methods can be classified into four main groups: (i) hydrothermal reaction sintering (HRS), (ii) hydrothermal hot pressing (HHP), (iii) pressure-assisted densification techniques: room-temperature densification (RTD), cold sintering (CS), warm press (WP), and finally no-pressure assisted method called (iv) reactive hydrothermal liquid phase densification (rHLPD). Above named techniques are commonly assisted by an aqueous solution used as either reactant or transient liquid phase to assist densification. Starting from the background in traditional sintering processes, this review aims to explore in depth the existing literature about low temperature densification approaches along with their advantages & disadvantages, and probable application areas.Article Citation - WoS: 14Citation - Scopus: 17Electrical Characteristics of Low Temperature Densified Barium Titanate(Elsevier, 2020) Karacasulu, Levent; Tokkan, Melike; Bortolotti, Mauro; Ischia, Gloria; Adem, Umut; Ahmetoğlu, Çekdar VakıfA low temperature densification technique, i.e. reactive hydrothermal liquid-phase densification (rHLPD) was followed to obtain highly dense BaTiO3 components at temperatures <= 240 degrees C. The formed ceramics were characterized concerning not only the structural features but also the electrical properties. The increase of both reaction time and temperature resulted in enhanced densification of BaTiO3 components reaching about 90% of theoretical density. The presence of the tetragonal BaTiO3 was demonstrated by both XRD and TEM analysis. Despite the low reaction temperatures, the samples showed promising dielectric, ferroelectric and piezoelectric functionality without additional annealing. A broad dielectric peak was observed around 135 degrees C at the Curie temperature; saturated hysteresis loops and corresponding butterfly-shaped strain-electric field loops were obtained. BaTiO3 sample subjected to hydrothermal reaction at 240 degrees C for 72 h yielded a piezoelectric coefficient of 84 pC/N.