Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
3 results
Search Results
Article Citation - WoS: 2Citation - Scopus: 2Scanning Probe Oxidation Lithography on Ta Thin Films(American Scientific Publishers, 2008) Okur, Salih; Büyükköse, Serkan; Tarı, SüleymanA Semi-Contact Scanning Probe Lithography Technique (SC-SPL) has been applied to create nano-oxide patterns on Ta thin films grown by DC magnetron sputtering method on SiO 2/Si substrates. The height and linewidth profiles of nano-oxide lines created by a conductive AFM tip on Ta film surfaces were measured as a function of applied voltage, oxidation time, humidity, and tip apex curvature. The AFM surface measurements show that the height of the oxides increases linearly with increasing voltage; but there was no oxide growth, when less than 4 V was applied even at 85% relative humidity. Electrical measurements were performed and the resistivities of the TaO x layer and Ta film were obtained as 5.76 × 10 8 and 1.4 × 10 5 Ohm-cm, respectively.Article Citation - WoS: 26Citation - Scopus: 24Effect of Ta Buffer Layer and Thickness on the Structural and Magnetic Properties of Co Thin Films(AVS Science and Technology Society, 2009) Vahaplar, Kadir; Tarı, Süleyman; Tokuç, Hüseyin; Okur, SalihSingle Co and Ta/Co bilayers were grown on Si(100) substrates in a magnetron sputtering system. The effect of Ta buffer layer and the thickness of Co layer on the structural and magnetic properties of the Co layers has been studied. A single Co layer shows a textured structure above thickness of 40 nm according to the x-ray diffraction (XRD) pattern. The magnetic properties of Co layers depend significantly on the thickness of the films. Ta grows as highly textured Β -Ta (tetragonal) phase on Si with a smooth surface. The XRD and atomic force microscopy results show that the Ta buffer layer improves the structural properties dramatically, resulting in a strongly textured and smoother surface morphology. The Ta layer also affects the magnetic properties of Co layers to a large extent, especially inducing an in-plane anisotropy in thin Co films.Conference Object Citation - WoS: 76Citation - Scopus: 80Stability of Microcrystalline Silicon for Thin Film Solar Cell Applications(Institute of Electrical Engineers, 2003) Finger, Friedhelm; Carius, Reinhard; Dylla, Thorsten; Klein, Stefan; Okur, Salih; Güneş, MehmetThe development of microcrystalline silicon (μc-Si:H) for solar cells has made good progress with efficiencies better than those of amorphous silicon (a-Si:H) devices. Of particular interest is the absence of light-induced degradation in highly crystalline μc-Si:H. However, the highest efficiencies are obtained with material which may still include a-Si:H regions and light-induced changes may be expected in such material. On the other hand, material of high crystallinity is susceptible to in-diffusion of atmospheric gases which, through adsorption or oxidation, affect the electronic transport. Investigations are presented of such effects concerning the stability of μc-Si:H films and solar cells prepared by plasma-enhanced chemical vapour deposition and hot wire chemical vapour deposition.