Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
4 results
Search Results
Article Citation - WoS: 40Citation - Scopus: 47Boron in Geothermal Energy: Sources, Environmental Impacts, and Management in Geothermal Fluid(Elsevier, 2022) Mott, A.; Recepoğlu, Yaşar Kemal; Baba, Alper; Uzelli, Taygun; Hadi Mosleh, Mojgan; Gören, Ayşegül Yağmur; Ökten, Hatice Eser; Yüksel Özşen, Aslı; Babaei, Masoud; Ökten, Hatice Eser; Gören, Ayşegül Yağmur; Baba, Alper; Feng, C.; Recepoğlu, Yaşar Kemal; Uzelli, Taygun; Uytun, Hüseyin; Morata, Diego; Yüksel Özşen, Aslı; 03.07. Department of Environmental Engineering; 03.02. Department of Chemical Engineering; 03.03. Department of Civil Engineering; 01.01. Units Affiliated to the Rectorate; 01. Izmir Institute of Technology; 03. Faculty of EngineeringThe problem of hazardous chemicals in geothermal fluid is a critical environmental concern in geothermal energy developments. Boron is among the hazardous contaminants reported to be present at high concentrations in geothermal fluids in various countries. Poor management and inadequate treatment of geothermal fluids can release excessive boron to the environment that has toxic effects on plants, humans, and animals. Despite the importance of boron management in geothermal fluid, limited and fragmented resources exist that provide a comprehensive understanding of its sources, transport and fate, and the treatment strategies in geothermal energy context. This paper presents the first critical review from a systematic and comprehensive review on different aspects of boron in geothermal fluid including its generation, sources, toxicity, ranges and the management approaches and treatment technologies. Our research highlights the origin of boron in geothermal water to be mainly from historical water-rock interactions and magmatic intrusion. Excessive concentrations of boron in geothermal fluids have been reported (over 500 mg/L in some case studies). Our review indicated that possible boron contamination in geothermal sites are mostly due to flawed construction of production/re-injection wells and uncontrolled discharge of geothermal water to surface water. The dominancy of non-ionic H3BO3 species makes the selection of the suitable treatment method for geothermal waters limited. Combining boron selective resins and membrane technologies, hybrid systems have provided effluents suitable for irrigation. However, their high energy consumption and course structure of boron selective resins encourage further research to develop cost-effective and environmentally friendly alternatives.Article Citation - WoS: 22Citation - Scopus: 24Conversion of Biomass To Organic Acids by Liquefaction Reactions Under Subcritical Conditions(Frontiers Media S.A., 2020) Yüksel Özşen, Aslı; Yüksel Özşen, Aslı; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyRecently, liquefaction of biomass in subcritical water to convert it into value-added substances has been broadly attracting attention. However, there is a gap in literature about the levulinic acid, which is a high worth substance, production from biomass using subcritical water. As a green chemistry approach, decomposition of biomass could be obtained using subcritical water effectively. In this case, water uses as a solvent so that it gives a possibility to take place a reaction for the decomposition of biomass. Subcritical water, which liquid water and its temperature is higher than the normal boiling point of water, has higher ion product as well as higher concentrations of H+ and OH- ions. Additionally, it has high diffusivity, low viscosity and much lower dielectric constant. For instance, whereas dielectric constant of subcritical water is 80 at 298 K, it is 2 at 673 K. The point of this research paper is to assess the impacts of different reaction parameters on cellulose conversion as the principle segment of lignocellulosic biomasses for the production of value-added chemicals, particularly levulinic acid. Hazelnut shell waste was chosen as model biomass since hazelnut is a standout amongst the most cultivated agricultural crops in Turkey. Besides, Turkey provide 70% of the world's total hazelnut production. It was found that as reaction temperature increases, a considerable improvement on the amount of formed levulinic acid and conversion of hazelnut shell was observed. For instance, when the reaction temperature, time and acid concentration were 280 degrees C, 120 min and 50 mM, respectively, levulinic acid yield and conversion of hazelnut shell were found as 13.05 and 65.40%, respectively. Addition of H2SO4 enhanced the production of levulinic acid from waste hazelnut shell. Another method which is hybrid process could be used to produce value-added chemicals from lignocellulosic biomass. Hybrid process basically combines hydrolysis and electrolysis in subcritical water. Subcritical water has much lower dielectric constant than liquid water at ambient temperature. So, it was claimed that if constant current was applied to the reaction medium through specially designed electrodes in subcritical water environment, electrolysis could alter the hydrolysis reaction of cellulose in a way of protonation of intra-and inter-molecular hydrogen bonding around anode and as a result electrolysis in subcritical water could decrease necessary thermal energy to hydrolyze the beta(1-4) glycosidic linkage. Therefore, we developed a green hybrid process by combining hydrolysis and electrolysis in subcritical water without using any toxic, organic solvents and catalyst. Effects of especially applied current and temperature on the product distribution and conversions of cellulose were revealed and hydrothermal electrolysis reaction pathway of cellulose was proposed. The significance of the interaction indicated that, applied voltage had major impact on cellulose hydrolysis. Maximum cellulose conversion (82%) was achieved at 230 degrees C and 180 min of reaction time in 25 mM of H2SO4. Application of 8.0 V of applied voltage to the reaction medium at reaction temperature of 230 degrees C increased the TOC conversion (50.3%) with acid concentration of 25 mM in comparison with current-free experiments. Thus, the idea of electrochemically generated acid layer due to the dissociation of water around anode is supported. As future perspective, the output of the study gave an idea about converting cellulose and various biomass wastes, which may have high cellulose, content and led the way in obtaining valuable chemicals from no utilized real biomass sources such as hazelnut shell waste. The studies with other biomasses are undergoing.Article Citation - WoS: 2Citation - Scopus: 2Electrolytic Oxidation of 1,8-Diazabicyclo[5.4.0]undec in Hot-Compressed Water on a Titanium Electrode(American Chemical Society, 2020) Orak, Ceren; Yüksel Özşen, Aslı; Yüksel Özşen, Aslı; Orak, Ceren; 01. Izmir Institute of Technology; 03.02. Department of Chemical Engineering; 03. Faculty of EngineeringThe nitrogen-containing heterocyclic organic compound, 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), was chosen to prepare a model solution to represent nitrogen-containing industrial waste streams. A hybrid reactor system was designed to combine electrolysis with wet oxidation in hot compressed water using a titanium electrode. The effects of current density, NaOH concentration, and reaction time on DBU and total organic carbon (TOC) removal were investigated via Minitab 18 software to clarify the main and interaction effects. Statistical analysis shows that the NaOH concentration and current density had significant effects on DBU removal. The highest DBU (91.2%) and TOC (45%) removal was observed at the lowest DBU concentration (3 mM) for 90 min of reaction time. Last, the effect of temperature on DBU and TOC removal was investigated. TOC removal was described with the first-order reaction kinetic model. Rate constants were determined as 0.0025, 0.041, and 0.050 min(-1) at 200, 240, and 280 degrees C, respectively. The activation energy was calculated as 79.86 kJ/mol.Article Citation - WoS: 1Citation - Scopus: 1Mineralization of Olive Mill Wastewater Under Hydrothermal Conditions(Desalination Publications, 2019) Ersanlı, Çağlar; Yüksel Özşen, Aslı; Yüksel Özşen, Aslı; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyOlive mill wastewater (OMW) is highly dangerous for land and aquatic environments because of its high phenolic content, acidity, and salinity. Hence, hydrothermal degradation of OMW in subcritical water medium with and without using external oxidizer (H2O2) was studied to decrease its total organic carbon (TOC), total phenolic content (TPC), and color. Effects of reaction temperature (150 degrees C-250 degrees C), reaction time (30-120 min), and H2O2 content (0-100 mM) on TOC and TPC of OMW were investigated. Box-Behnken-type experimental design and statistical analysis (analysis of variance) were practiced by Design Expert 11. According to statistical analysis, effect of reaction temperature significantly affected TOC removal efficiency. The best TOC reduction (31.65%) was achieved without using H2O2 at 250 degrees C for 120 min.