Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
10 results
Search Results
Article Citation - WoS: 5Citation - Scopus: 4Polarity Induced Vapochromism and Vapoluminescence of Polythiophene Derivatives for Volatile Organic Compounds Classification(Elsevier, 2023) Karabacak, Soner; Qun, David Lee Chao; Ammanath, Gopal; Yeasmin, Sanjida; Yağmurcukardeş, Mehmet; Palaniappan, Alagappan; Liedberg, Bo; Yıldız, Ümit HakanPolarity induced vapochromic and vapoluminescent properties of cationic poly-3-alkoxythiophene derivatives (PT) casted on polyvinylidene fluoride (PVDF) membranes are reported. PT with six different pendant groups are designed to differentially interact with volatile organic compounds (VOC) of varying polarities, thereby enabling their classification. PT exhibit a rapid vapochromic response with a concurrent modulation of vapoluminescence due to the non-covalent cation-? interactions between the pendant groups and the PT backbone. Adsorption of VOC on pendant groups alters the conformation of PT backbone, thus resulting in an increase in intensity and blue shifting of fluorescence emission within the visible spectrum. The vapoluminescent responses are found to be more sensitive with a limit of detection (LOD) of ?7 ppm and a wider dynamic range as compared to the vapochromic responses with a LOD of ?60 ppm for the detection of a model VOC: chloroform. Notably, all the PT illustrate an instantaneous recovery of colour and luminescence upon desorption of VOC. PT interaction with VOC of varying polarities was ascertained using density functional theory (DFT) and principal component analysis (PCA) methodologies. In summary, the polarity induced vapochromic and vapoluminescent properties of PT could yield a selective and sensitive vapochromic and fluorometric dual-mode VOC detection platform. © 2023Article Citation - WoS: 6Citation - Scopus: 6Ion and Molecule Sieving Through Highly Stable Graphene-Based Laminar Membranes(Amer Chemical Soc, 2023) Yuan, Gang; Jiang, Yu; Wang, Xiao; Ma, Jiaojiao; Ma, Hao; Wang, Xiang; Hu, ShengBiological ion channels use both their sizes and residual groups to reject large ions and molecules and allow highly selective permeation of small species with similar sizes. To realize these properties in artificial membranes, the main challenge is the precise control of both the channel size and the interior at the nanoscale. Here we report the permeation of ions and molecules through interlayer channels in graphene-based laminar membranes. The amino groups decorated on channel walls are found to form hydrogen bond networks with intercalated water molecules, thus providing a highly stable laminate structure and a controlled channel size. Solutes with hydration diameters of >10 angstrom are precisely sieved out. Small species permeate through with selectivities of up to a few thousand, governed by their distinct electrical interactions with channels depending on the atomistic distance from the charged species to the channel walls. Our work offers important insights into manipulating channel structures for enhanced separation performance at the nanoscale.Article Citation - WoS: 32Citation - Scopus: 31Wien Effect in Interfacial Water Dissociation Through Proton-Permeable Graphene Electrodes(Nature Research, 2022) Cai, Junhao; Griffin, Eoin; Guarochico-Moreira, Victor H.; Barry, D.; Xin, B.; Yağmurcukardeş, Mehmet; Zhang, Sheng; Geim, Andre K.; Peeters, François M.; Lozada-Hidalgo, MarceloStrong electric fields can accelerate molecular dissociation reactions. The phenomenon known as the Wien effect was previously observed using high-voltage electrolysis cells that produced fields of about 107 V m−1, sufficient to accelerate the dissociation of weakly bound molecules (e.g., organics and weak electrolytes). The observation of the Wien effect for the common case of water dissociation (H2O ⇆ H+ + OH−) has remained elusive. Here we study the dissociation of interfacial water adjacent to proton-permeable graphene electrodes and observe strong acceleration of the reaction in fields reaching above 108 V m−1. The use of graphene electrodes allows measuring the proton currents arising exclusively from the dissociation of interfacial water, while the electric field driving the reaction is monitored through the carrier density induced in graphene by the same field. The observed exponential increase in proton currents is in quantitative agreement with Onsager’s theory. Our results also demonstrate that graphene electrodes can be valuable for the investigation of various interfacial phenomena involving proton transport.Article Citation - WoS: 40Citation - Scopus: 38Anisotropic and Outstanding Mechanical, Thermal Conduction, Optical, and Piezoelectric Responses in a Novel Semiconducting Bcn Monolayer Confirmed by First-Principles and Machine Learning(Elsevier, 2022) Mortazavi, Bohayra; Fazel Shojaei; Yağmurcukardeş, Mehmet; Alexander Shapeev; Xiaoying ZhuangGraphene-like nanomembranes made of the neighboring elements of boron, carbon and nitrogen elements, are well-known of showing outstanding physical properties. Herein, with the aid of density functional theory (DFT) calculations, various atomic configurations of the graphene-like BCN nanosheets are investigated. DFT results reveal that depending on the atomic arrangement, the BCN monolayers may display semimetallic Dirac cone or semiconducting electronic nature. BCN nanosheets are also found to exhibit high piezoelectricity and carrier mobilities with considerable in-plane anisotropy, depending on the atomic arrangement. For the predicted most stable BCN monolayer, thermal and mechanical properties are explored using machine learning interatomic potentials. The room temperature tensile strength and lattice thermal conductivity of the most stable BCN monolayer are estimated to be orientation-dependent and remarkably high, over 78 GPa and 290 W/m.K, respectively. In addition, the thermal expansion coefficient of the monolayer BCN at room temperature is estimated to be −3.2 × 10−6 K−1, which is close to that of the graphene. The piezoelectric response of the herein proposed BCN lattice is also predicted to be close to that of the h-BN monolayer. Presented results highlight outstanding physics of the BCN nanosheets.Article Citation - WoS: 40Citation - Scopus: 38Gas Permeation Through Graphdiyne-Based Nanoporous Membranes(Nature Research, 2022) Zhou, Zhihua; Tan, Yongtao; Yang, Qian; Bera, Achintya; Xiong, Zecheng; Yağmurcukardeş, Mehmet; Kim, MinsooNanoporous membranes based on two dimensional materials are predicted to provide highly selective gas transport in combination with extreme permeance. Here we investigate membranes made from multilayer graphdiyne, a graphene-like crystal with a larger unit cell. Despite being nearly a hundred of nanometers thick, the membranes allow fast, Knudsen-type permeation of light gases such as helium and hydrogen whereas heavy noble gases like xenon exhibit strongly suppressed flows. Using isotope and cryogenic temperature measurements, the seemingly conflicting characteristics are explained by a high density of straight-through holes (direct porosity of ∼0.1%), in which heavy atoms are adsorbed on the walls, partially blocking Knudsen flows. Our work offers important insights into intricate transport mechanisms playing a role at nanoscale.Article Citation - WoS: 6Citation - Scopus: 7Interface-Dependent Phononic and Optical Properties of Geo/Moso Heterostructures(Royal Society of Chemistry, 2022) Yağmurcukardeş, Mehmet; Sözen, Yiğit; Başkurt, Mehmet; Peeters, François M.; Şahin, HasanThe interface-dependent electronic, vibrational, piezoelectric, and optical properties of van der Waals heterobilayers, formed by buckled GeO (b-GeO) and Janus MoSO structures, are investigated by means of first-principles calculations. The electronic band dispersions show that O/Ge and S/O interface formations result in a type-II band alignment with direct and indirect band gaps, respectively. In contrast, O/O and S/Ge interfaces give rise to the formation of a type-I band alignment with an indirect band gap. By considering the Bethe-Salpeter equation (BSE) on top of G0W0 approximation, it is shown that different interfaces can be distinguished from each other by means of the optical absorption spectra as a consequence of the band alignments. Additionally, the low-and high-frequency regimes of the Raman spectra are also different for each interface type. The alignment of the individual dipoles, which is interface-dependent, either weakens or strengthens the net dipole of the heterobilayers and results in tunable piezoelectric coefficients. The results indicate that the possible heterobilayers of b-GeO/MoSO asymmetric structures possess various electronic, optical, and piezoelectric properties arising from the different interface formations and can be distinguished by means of various spectroscopic techniques.Article Citation - WoS: 7Citation - Scopus: 6Anisotropic Etching of Cvd Grown Graphene for Ammonia Sensing(Institute of Electrical and Electronics Engineers Inc., 2022) Yağmurcukardeş, Nesli; Bayram, Abdullah; Aydın, Hasan; Yağmurcukardeş, Mehmet; Açıkbaş, Yaser; Peeters, François M.; Çelebi, CemBare chemical vapor deposition (CVD) grown graphene (GRP) was anisotropically etched with various etching parameters. The morphological and structural characterizations were carried out by optical microscopy and the vibrational properties substrates were obtained by Raman spectroscopy. The ammonia adsorption and desorption behavior of graphene-based sensors were recorded via quartz crystal microbalance (QCM) measurements at room temperature. The etched samples for ambient NH3 exhibited nearly 35% improvement and showed high resistance to humidity molecules when compared to bare graphene. Besides exhibiting promising sensitivity to NH3 molecules, the etched graphene-based sensors were less affected by humidity. The experimental results were collaborated by Density Functional Theory (DFT) calculations and it was shown that while water molecules fragmented into H and O, NH3 interacts weakly with EGPR2 sample which reveals the enhanced sensing ability of EGPR2. Apparently, it would be more suitable to use EGRP2 in sensing applications due to its sensitivity to NH3 molecules, its stability, and its resistance to H2O molecules in humid ambient.Article Citation - WoS: 62Citation - Scopus: 59Exponentially Selective Molecular Sieving Through Angstrom Pores(Nature Publishing Group, 2021) Sun, Pengzhan; Yağmurcukardeş, Mehmet; Zhang, R.; Kuang, Wenjun; Lozada-Hidalgo, Marcelo; Liu, B. L.; Geim, Andre K.Two-dimensional crystals with angstrom-scale pores are widely considered as candidates for a next generation of molecular separation technologies aiming to provide extreme, exponentially large selectivity combined with high flow rates. No such pores have been demonstrated experimentally. Here we study gas transport through individual graphene pores created by low intensity exposure to low kV electrons. Helium and hydrogen permeate easily through these pores whereas larger species such as xenon and methane are practically blocked. Permeating gases experience activation barriers that increase quadratically with molecules’ kinetic diameter, and the effective diameter of the created pores is estimated as ∼2 angstroms, about one missing carbon ring. Our work reveals stringent conditions for achieving the long sought-after exponential selectivity using porous two-dimensional membranes and suggests limits on their possible performance.Article Citation - WoS: 46Citation - Scopus: 49Tuning Electronic and Magnetic Properties of Monolayer ?-Rucl3 by In-Plane Strain(Royal Society of Chemistry, 2018) İyikanat, Fadıl; Yağmurcukardeş, Mehmet; Senger, Ramazan Tuğrul; Şahin, HasanBy employing density functional theory-based methods, the structural, vibrational, electronic, and magnetic properties of monolayer α-RuCl3 were investigated. It was demonstrated that ferromagnetic (FM) and zigzag-antiferromagnetic (ZZ-AFM) spin orders in the material have very close total energies with the latter being the ground state. We found that each Ru atom possesses a magnetic moment of 0.9 μB and the material exhibits strong magnetic anisotropy. While both phases exhibit indirect gaps, the FM phase is a magnetic semiconductor and the ZZ-AFM phase is a non-magnetic semiconductor. The structural stability of the material was confirmed by phonon calculations. Moreover, dynamical analysis revealed that the magnetic order in the material can be monitored via Raman measurements of the crystal structure. In addition, the magnetic ground state of the material changes from ZZ-AFM to FM upon certain applied strains. Valence and conduction band-edges of the material vary considerably under in-plane strains. Owing to the stable lattice structure and unique and controllable magnetic properties, monolayer α-RuCl3 is a promising material in nanoscale device applications.Article Citation - WoS: 88Citation - Scopus: 93Nanoribbons: From Fundamentals To State-Of Applications(American Institute of Physics, 2016) Yağmurcukardeş, Mehmet; Peeters, François M.; Senger, Ramazan Tuğrul; Şahin, HasanAtomically thin nanoribbons (NRs) have been at the forefront of materials science and nanoelectronics in recent years. State-of-the-art research on nanoscale materials has revealed that electronic, magnetic, phononic, and optical properties may differ dramatically when their one-dimensional forms are synthesized. The present article aims to review the recent advances in synthesis techniques and theoretical studies on NRs. The structure of the review is organized as follows: After a brief introduction to low dimensional materials, we review different experimental techniques for the synthesis of graphene nanoribbons (GNRs) with their advantages and disadvantages. In addition, theoretical investigations on width and edge-shape-dependent electronic and magnetic properties, functionalization effects, and quantum transport properties of GNRs are reviewed. We then devote time to the NRs of the transition metal dichalcogenides (TMDs) family. First, various synthesis techniques, E-field-tunable electronic and magnetic properties, and edge-dependent thermoelectric performance of NRs of MoS2 and WS2 are discussed. Then, strongly anisotropic properties, growth-dependent morphology, and the weakly width-dependent bandgap of ReS2 NRs are summarized. Next we discuss TMDs having a T-phase morphology such as TiSe2 and stable single layer NRs of mono-chalcogenides. Strong edge-type dependence on characteristics of GaS NRs, width-dependent Seebeck coefficient of SnSe NRs, and experimental analysis on the stability of ZnSe NRs are reviewed. We then focus on the most recently emerging NRs belonging to the class of transition metal trichalcogenides which provide ultra-high electron mobility and highly anisotropic quasi-1D properties. In addition, width-, edge-shape-, and functionalization-dependent electronic and mechanical properties of blackphosphorus, a monoatomic anisotropic material, and studies on NRs of group IV elements (silicene, germanene, and stanene) are reviewed. Observation of substrate-independent quantum well states, edge and width dependent properties, the topological phase of silicene NRs are reviewed. In addition, H2 concentration-dependent transport properties and anisotropic dielectric function of GeNRs and electric field and strain sensitive I-V characteristics of SnNRs are reviewed. We review both experimental and theoretical studies on the NRs of group III-V compounds. While defect and N-termination dependent conductance are highlighted for boron nitride NRs, aluminum nitride NRs are of importance due to their dangling bond, electric field, and strain dependent electronic and magnetic properties. Finally, superlattice structure of NRs of GaN/AlN, Si/Ge, G/BN, and MoS2/WS2 is reviewed.