Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
3 results
Search Results
Article Citation - WoS: 11Citation - Scopus: 13Magnesium-Ion Battery Anode From Polymer-Derived Sioc Nanobeads(Wiley, 2023) Guo, Wuqi; Kober, Delf; Gurlo, Aleksander; Bekheet, Maged F.; İçin, Öykü; Ahmetoğlu, Çekdar VakıfTin-containing silicon oxycarbide (SiOC/Sn) nanobeads are synthesized with different carbon/tin content and tested as electrodes for magnesium-ion batteries. The synthesized ceramics are characterized by thermogravimetric-mass spectroscopy, Fourier-transform infrared spectroscopy, X-ray diffraction (XRD), Raman spectroscopy, N2 sorption analysis, scanning electron microscope, energy-dispersive X-ray, and elemental analysis. Galvanostatic cycling tests, rate performance tests, electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) tests, and ex situ XRD measurements are conducted. Results of battery performance tests present a high capacity of 198.2 mAh g-1 after the first discharging and a reversible capacity of 144.5 mAh g-1 after 100 cycles at 500 mA g-1. Excellent rate performance efficiency of 85.2% is achieved. Battery performances in this research are influenced by surface area, and tin contentof the SiOC/Sn nanobeads. EIS, CV tests, and ex situ XRD measurements reveal that higher surface area contributes to higher capacity by providing more accessible Mg2+ ion storage sites and higher rate capability by improving the diffusion process. Higher Sn content increases battery capacity through reversible Mg-Mg2Sn-Mg alloying/dealloying process and improves the rate performances by increasing electrical conductivity. Besides, SiOC advances cycling stability by preventing electrode collapse and enhances the capacity due to higher surface capacitive effects. SiOC nanobeads containing Sn nanoparticles are synthesized and tested as anode for magnesium-ion batteries. The anodes show high performance with reversible capacity of 144.5 mAh g-1 after 100 cycles at 500 mA g-1 and excellent rate performance efficiency of 85.2% from 50 to 500 mA g-1.imageArticle Citation - WoS: 41Citation - Scopus: 44Ultralong-Life Quinone-Based Porous Organic Polymer Cathode for High-Performance Aqueous Zinc-Ion Batteries(American Chemical Society, 2023) Büyükçakır, Onur; Yüksel, Recep; Begar, Ferit; Erdoğmuş, Mustafa; Arsakay, Madi; Lee, Sun Hwa; Kim, Sang OukWe synthesized and studied a redox-active quinone-basedporousorganic polymer (rPOP) and found ultralong cycle life: it is a promisingorganic cathode for aqueous zinc-ion batteries (ZIBs). It has highphysicochemical stability and enhanced intrinsic conductivity fromits fused-aromatic conjugated skeleton. rPOP's high porosityallows for efficient Zn2+ infiltration through the poresduring charging-discharging cycles and contributes to the efficientutilization of redox-active quinone units. It delivers a specificcapacity of 120 mAh g(-1) at a current density of0.1 A g(-1) with a flat and long discharge plateau,which is critically important to provide a stable voltage output.It provides ultralong cycle life at a current density of 1.0 A g(-1) for 1000 and at 2.0 A g(-1) for 30 000cycles, with initial capacity retention of 95 and 66%, respectively.The co-insertion (Zn2+ and H+) charge storagemechanism was investigated using various electrochemical measurementsand ex/in situ structural characterization techniques, and is explainedherein. These findings contribute to a better understanding of thestructure-property relationship for rPOP and open a new avenuefor new organic cathode materials for high-performance next-generationaqueous batteries.Article Citation - WoS: 11Citation - Scopus: 11Enhanced Room Temperature Energy Storage Density of Bi(li1/3ti2 Substituted Bi0.5na0.5tio3-Batio3 Ceramics(IOP Publishing, 2021) Karakaya, Merve; Adem, UmutFor high power electronics applications, relaxor ferroelectrics are promising materials due to their superior energy storage properties. In this study, we investigate the energy storage properties of novel lead free relaxor ferroelectric ceramics (1-x)(0.92Bi(0.5)Na(0.5)TiO(3)-0.08BaTiO(3))-xBi(Li1/3Ti2/3)O-3 (abbreviated as BNT-8BT-xBLT). BNT-8BT composition which is close to morphotropic phase boundary was chosen as the base due to its large maximum polarization (P-m) and higher ratio of weakly polar tetragonal phase which is expected to facilitate ergodic relaxor behavior and improve energy storage density. The substitution of BLT to the BNT-8BT strongly disrupts the correlations between the polar nanoregions and the transition from nonergodic to ergodic relaxor state occurs already at x = 0.02 BLT at room temperature. Largest energy density (W-rec) at 61 kV cm(-1) was obtained for x = 0.02 sample (0.656 J cm(-3)), followed by x = 0.03 (W-rec = 0.614 J cm(-3)) and x = 0.05 (W-rec= 0.559 J cm(-3)). The x = 0.02 sample keeps its energy storage density at high temperatures (i.e. W-rec= 0.88 J cm(-3,) eta = 97%, E-m= 65 kV cm(-1) at 125 degrees C), while larger electric field (up to 89 kV cm(-1)) could be applied to the x = 0.05 sample with the smallest grain size and energy density of 1.03 J cm(-3) was reached at room temperature. Energy storage density values of BLT substituted materials normalized per unit applied electric field are promising among BNT-based materials.