Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
8 results
Search Results
Article Preparation and Characterization of Hydroxyapatite Reinforced Polymeric Scaffolds(Natl Inst Science Communication-NISCAIR, 2025) Firata, Duygu Doga; Ersoz, Su Turku; Burcu Alp, Fatma; Cetin, Ali Emrah; Ciftcioglu, MuhsinPorous HA reinforced PLA/PCL scaffolds with polymer volume percentages in the 7.0-7.6 range have been prepared by solvent-casting/salt leaching technique. The scaffolds have been characterized by conducting gravimetric measurements, FTIR analysis, TGA, X-ray diffraction analysis, compression tests, cell viability tests, and thermal and hydrolytic degradation tests in order to investigate the effect of PLA/PCL, PLA/HA, PCL/HA and PLA/PCL/HA blending on scaffold properties. Porosity of the scaffolds has been determined to be in the 83-92 percent range. The scaffold porosity has decreased with HA content. The water absorption of the scaffolds has been found to be in between 400 and 750%. The yield strength and the elastic modulus of the scaffolds have been determined to be in the 0.001-0.02 and 5.6-10.6 MPa ranges, respectively. The yield strength of the scaffolds has increased by both PCL and HA contents whereas elastic modulus has increased with PCL content but has decreased with HA content. Mechanical test results have indicated that the addition of HA has increased the strength of the scaffolds while decreasing their flexibility. The activation energies for the thermal degradation of the scaffolds have been determined to be in the 130-398 kJ/mol range and have been shown to be a function of PCL, PLA, and HA content. The hydrolytic degradation behavior of the scaffolds in acetate buffer solutions (pH=4.5) during 127 days and XRD analysis have indicated that the hydrolytic degradation occurring in the amorphous part of the surface film has been diffusion-controlled. The diffusion coefficients of the degradation products in the scaffolds have been estimated to be in the 1.21-4.95x10(-13) m(2)/s range. Cell viability test results have indicated that the composition of the composite scaffold structure has played a determining role in the prepared scaffolds.Article Proliferative Effects and Cellular Uptake of Ceramic Nanoparticles in Cancer and Normal Cells(Univ Chemistry & Technology, Prague, 2024) Cesmeli, Selin; Tomak, Aysel; Winkler, David A.; Karakus, Ceyda OkselThe high biocompatibility, wear resistance, and high surface area-to-volume ratios of calcium phosphate (CaP) nanoparticles make them materials of great interest for a very broad range of medical applications, such as dentistry, drug delivery, biomedical imaging, gene transfection and silencing, biomedical imaging, immunisation, and bone substitution. While their use as an enamel remineralisation agent, a bone substitution material, an implant coating, and drug/gene delivery agents is widely approved by the regulating bodies, insufficient attention has been paid to the interactions of CaP-based nanoparticles with cells and organs once in the bloodstream and distributed through the body. Here, three different CaP-based nanoparticles (CP: calcium phosphate, TCP: tricalcium phosphate, and HAp: hydroxyapatite) were examined for the proliferative effects, oxidative damage potential, and cellular uptake in the human embryonic kidney (HEK293) and pancreatic cancer (Panc-1) cell lines. The physicochemical properties of the nanoparticles were characterised by Teller analysis, and X-ray diffraction spectroscopy. Maximum proliferative effects were generated by 400 mu g center dot ml-1 TCP (220 %) in HEK293 cells. Interestingly, although CP nanoparticles had the highest reactive oxygen species formation capacity in the HEK293 cells, they exhibited the lowest proliferative effects and a relatively low internalisation rate, suggesting a minimal correlation between the cellular uptake level and oxidative potential.Article Citation - WoS: 10Citation - Scopus: 12Enhanced Model Protein Adsorption of Nanoparticulate Hydroxyapatite Thin Films on Silk Sericin and Fibroin Surfaces(Springer, 2022) Özcan, Selçuk; Çiftçioğlu, MuhsinHydroxyapatite coated metallic implants favorably combine the required biocompatibility with the mechanical properties. As an alternative to the industrial coating method of plasma spraying with inherently potential deleterious effects, sol-gel methods have attracted much attention. In this study, the effects of intermediate silk fibroin and silk sericin layers on the protein adsorption capacity of hydroxyapatite films formed by a particulate sol-gel method were determined experimentally. The preparation of the layered silk protein/hydroxyapatite structures on glass substrates, and the effects of the underlying silk proteins on the topography of the hydroxyapatite coatings were described. The topography of the hydroxyapatite layer fabricated on the silk sericin was such that the hydroxyapatite particles were oriented forming an oriented crystalline surface. The model protein (bovine serum albumin) adsorption increased to 2.62 µg/cm2 on the latter surface as compared to 1.37 µg/cm2 of hydroxyapatite on glass without an intermediate silk sericin layer. [Figure not available: see fulltext.].Conference Object Citation - Scopus: 2Preparation and Characterization of Hydroxyapatite/Calcium Phosphate Powders(Trans Tech Publications, 2004) Şimşek, Deniz; Çiftçioğlu, Rukiye; Harsa, ŞebnemThe preparation of calcium phosphate based powders through chemical precipitation in order to determine the optimum conditions for the preparation of stoichiometric, thermally stable hydroxyapatite (HA) powders was investigated in this work. The effects of parameters like pH, aging time, and heat treatment temperature on the phase structure and morphology of the powders were investigated by SEM and XRD.HA was prepared at a Ca/P ratio of 1.67. The precipitation pH had a profound influence on the morphology and crystallite size of the powders in the 4-11 pH range. Relatively large 5 mum prismatic particles were obtained at low pH whereas the powders were formed from agglomerates of nano sized particles at high pH. Powders had a HA dominant phase structure above a pH of 8. Phase pure HA powders were obtained with close to theoretical yields at pH = 10 and 11. The crystallite sizes of the powders varied from about 30 nm at 90degreesC to 50-90 mn at 1250degreesC with the smallest crystallite sizes obtained for pH 10 and 11 powders at 1250degreesC. The crystallite size increased significantly with aging temperature.Article Citation - WoS: 26Citation - Scopus: 28Osteoconductive 3d Porous Composite Scaffold From Regenerated Cellulose and Cuttlebone-Derived Hydroxyapatite(SAGE Publications Inc., 2019) Palaveniene, Alisa; Tamburacı, Sedef; Kimna, Ceren; Glambaite, Kristina; Baniukaitiene, Odeta; Tıhmınlıoğlu, Funda; Liesiene, JolantaRecently, usage of marine-derived materials in biomedical field has come into prominence due to their promising characteristics such as biocompatibility, low immunogenicity and wide accessibility. Among these marine sources, cuttlebone has been used as a valuable component with its trace elemental composition in traditional medicine. Recent studies have focused on the use of cuttlebone as a bioactive agent for tissue engineering applications. In this study, hydroxyapatite particles were obtained by hydrothermal synthesis of cuttlebone and incorporated to cellulose scaffolds to fabricate an osteoconductive composite scaffold for bone regeneration. Elemental analysis of raw cuttlebone material from different coastal zones and cuttlebone-derived HAp showed that various macro-, micro- and trace elements - Ca, P, Na, Mg, Cu, Sr, Cl, K, S, Br, Fe and Zn were found in a very similar amount. Moreover, biologically unfavorable heavy metals, such as Ag, Cd, Pb or V, were not detected in any cuttlebone specimen. Carbonated hydroxyapatite particle was further synthesized from cuttlebone microparticles via hydrothermal treatment and used as a mineral filler for the preparation of cellulose-based composite scaffolds. Interconnected highly porous structure of the scaffolds was confirmed by micro-computed tomography. The mean pore size of the scaffolds was 510 mu m with a porosity of 85%. The scaffolds were mechanically characterized with a compression test and cuttlebone-derived HAp incorporation enhanced the mechanical properties of cellulose scaffolds. In vitro cell culture studies indicated that MG-63 cells proliferated well on scaffolds. In addition, cuttlebone-derived hydroxyapatite significantly induced the ALP activity and osteocalcin secretion. Besides, HAp incorporation increased the surface mineralization which is the major step for bone tissue regeneration.Article Citation - WoS: 3Citation - Scopus: 3Particulate Sol Route Hydroxyapatite Thin Film-Silk Protein Interface Interactions(Gazi Üniversitesi, 2010) Özcan, Selçuk; Çiftçioğlu, MuhsinHydroxyapatite (HAp) thin film coatings were prepared on bioinert glass slides by a particulate sol method and the effects of intermediate silk fibroin and silk sericin coatings on the HAp film formation and surface topography were examined. The films prepared with smaller crushed particle sols had a higher agglomeration tendency during the drying consolidation step of the thin film formation, and contained agglomerates larger in number and size, which was demonstrated experimentally and in accordance with the DLVO theory. In the thin films prepared on intermediate sericin and fibroin films the number and size of agglomerates were decisively reduced, forming homogeneous films of predominantly primary particles, especially for the larger particle size sols. The regular surface electrostatic potential arrangements of the β-sheet structures of the sericin and fibroin, and of hydroxyapatite crystals, gave rise to the coulombic attraction driven surface energy minimization, enhancing the hydroxyapatite thin film formation process. The positive degree of cooperativity in the hydroxyapatite particle deposition on the silk protein coatings was disrupted by the particle agglomeration tendency.Conference Object Citation - WoS: 8Citation - Scopus: 12Mechanical Properties of Hydroxyapatite Composites Reinforced With Hydroxyapatite Whiskers(Trans Tech Publications, 2004) Şimşek, Deniz; Çiftçioğlu, Rukiye; Güden, Mustafa; Çiftçioğlu, Muhsin; Harsa, Hayriye ŞebnemSintering and mechanical behavior of pure and hydroxyapatite (HA) whisker reinforced HA composites were investigated in this work. Pure and composite samples were prepared by using a commercial powder and whiskers prepared by molten salt synthesis. The dry-pressed samples were sintered in the 800 and 1300°C range. The effect of whisker-addition on the mechanical properties of HA was investigated through compression and hardness testing. Compressive strength and fracture strain were observed to increase by the addition of whiskers.Conference Object Citation - WoS: 10Citation - Scopus: 13Preparation and Characterization of Polylactide-Hydroxyapatite Biocomposites(Trans Tech Publications, 2004) Gültekin, Naz; Tıhmınlıoğlu, Funda; Çiftçioğlu, Rukiye; Çiftçioğlu, Muhsin; Harsa, Hayriye ŞebnemIn the present study, the preparation and characterization of polylactide-Hydroxyapatite(HA) composite films for biomedical applications have been studied. The effects of number of parameters such as polymer type, HA loading, surface modification and its concentration on the mechanical and microstructural properties of the composites were investigated. Poly-L-Lactide and 96/4 Poly(L-Lactide co D-Lactide) copolymer-HA composites containing 10-40 wt% HA particles have been prepared by solvent casting technique. The HA powder was synthesized by precipitation technique. Interfacial interactions between HA and polylactide polymer were modified to improve filler compatibility and mechanical properties of the composites by surface treatment of the HA with two different silane coupling agents; 3-aminopropyltriemoxysilane (AMPTES) and 3-mercaptopropyltrimethoxysilane (MPTMS) at three different concentrations(0.5-2 wt%). Silane treatment indicated improvements in the mechanical properties of the composites compared to the untreated HA loaded polylactide composites. Tensile test results showed that the maximum improvement in the mechanical properties of the composites was obtained for PLA composites containing 1 wt% aminofunctional silane treated HA and 0.5-wt% mercaptopropyltrimethoxy silane treated HA for PDLA composites. Scanning electron microscopy studies also revealed better dispersion of silane treated HA particles in the polymer matrix.